Showing 40–50 of 572 results

Constructed with 50/125 micron cableLength: 1-meterUse on fiber and fibre channel installationsLC male to LC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: All glass graded indexCore diameter: Two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: AcrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumerical aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

400 GbE Cable Supports Higher Bandwidths Needed for Next-Generation Data NetworkingAs the amount of traffic in data networks grows, so does the need for next-gen devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 400G Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.Switchable LC Connectors Allow Easy Polarity ConversionsThe switchable LC duplex connectors on both ends of the cable let you easily switch the fiber polarity without tools or the need to re-terminate the connectors. This can allow for stacked LC adapters, eliminating the need for dual zip cords and reducing overall bulk cabling in high-density situations. Just remove the clipped piece holding the connector ends together on each side, identify the send and receive ends, and switch the polarity of those ends based on your application needs.Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has an aqua jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

40/100/400 GbE Cable Supports Higher Bandwidths for High-Density Data NetworkingThe N370X-07M is a premium multimode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals over short distances. It is designed to support higher bandwidths for high-density patching between data center MDFs and IDFs in enterprise installations. This singlemode 9/125 OS2 cable is an ideal choice for 100 Gb Ethernet applications up to 100 meters (328 feet) at 1550 nm. It is also backward compatible with 10 Gb and 25 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb or 400 Gb.Switchable Connectors Allow Easy Polarity ConversionsThe switchable LC/UPC duplex ends let you easily switch the fiber polarity without tools or the need to re-terminate the connectors.Yellow Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OS2-rated cable has a yellow jacket to identify it as singlemode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

1 m. (3 ft.) 30Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU1MUse in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption

5M (16.4-ft.) Black 24Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU5M (See the Support tab on this web page for additional cross references)Use in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption

Tripp Lite N818-05M. Cable length: 196.9"" (5 m), Fiber optic type: OM3, Connector 1: 2x LC, Connector 2: 2x ST, Core diameter: 50 µm

Fast, Clear Data Transmission Through Your LANTwice the bandwidth throughput of multimode cableIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassSturdy LC and SC male connectors meet stringent insertion loss standardsBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemode

Manufactured from 9/125 duplex (zipcord) fiberPVC jacketLength: 10-meter ( 33ft ) Connectors: 2 LC and 2 ST connectors on each endBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Fiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

25 Meter LC/LC 50/125 10Gb Aqua Fiber Patch Cable, OM3 Rated10gb Ethernet speed to 300 meters @850nmUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

400 GbE Cable Supports Higher Bandwidths Needed for Next-Generation Data NetworkingAs the amount of traffic in data networks grows, so does the need for next-gen devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM3 cable is an ideal choice for 400G Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.Switchable LC Connectors Allow Easy Polarity ConversionsThe switchable LC duplex connectors on both ends of the cable let you easily switch the fiber polarity without tools or the need to re-terminate the connectors. This can allow for stacked LC adapters, eliminating the need for dual zip cords and reducing overall bulk cabling in high-density situations. Just remove the clipped piece holding the connector ends together on each side, identify the send and receive ends, and switch the polarity of those ends based on your application needs.Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM3-rated cable has an aqua jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.