Showing 30–40 of 572 results

Support Higher Bandwidths in Data Networks with OM3 Multimode 50/125 Fiber Patch CableAs the amount of traffic in data networks grows, so does the need for next generation devices and fiber cables to support higher bandwidths. This LC-to-LC multimode fiber optic Ethernet cable is well-suited for 10/40 Gb Ethernet applications up to 300 meters (984 feet) at 850 nm.Use with VCSEL Light Sources for a Cost-Effective, High-Bandwidth SolutionThe N820-10M-TAA is a laser-optimized multimode fiber (LOMMF) cable designed for use with vertical-cavity surface-emitting lasers (VCSELs) and LED lasers to offer a cost-effective, high-bandwidth solution over extended distances in the 850 nm wavelength range. It is commonly used in LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers. Experience Reliable Performance with Premium ConstructionPremium materials ensure this multimode fiber cable reliably carries data and voice signals. The N820-10M-TAA has duplex male LC connectors on each end. The aqua OFNP (Optical Fiber Non-Conductive Plenum) jacket is highly fire-resistant, making this cable ideal for plenum areas such as drop ceilings and raised floors. It meets current IEEE 802.3ae and TIA LOMMF standards, and is compatible with existing OM3-rated 50/125 fiber solutions.TAA-Compliant for GSA Schedule PurchasesThe N820-10M-TAA is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

5 Meter ( 16ft ) LC/LC, OM4 Rated40/100gb Ethernet speed to 300 meters @850nm Use with VCSEL and LED laser light sources High-Speed, High-Bandwidth, Low-Cost Backward compatible with legacy LAN's Ideal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

Fast, Clear Data Transmission Through Your LANData transfer speeds up to 10 GbpsIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsLC Connectors with Push/Pull TabsPush/pull tab connectors easy to install and remove with one handSturdy dual LC connectors tested to meet stringent insertion loss standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemodeFDDI- and OFNR-rated

3 m. (10 ft.) Black 30Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU3MUse in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 6-meters/Connectors: 2 LC connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

10gb Ethernet speed to 300 meters @850nm, OM3 ratedUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

The N820-15M-OM4 10 Gb/100 Gb Duplex Multimode 50/125 OM4 LSZH Fiber Patch Cable is OM4-rated for use with 40/100 Gb Ethernet applications up to 300 meters (@ 850 nm). For fast, clear signal transmission through your local area network (LAN) or storage area network (SAN), this high-speed, low-cost cable provides ten times more bandwidth than conventional 62.5 µm multimode fiber and performance rivaling that of singlemode cable.Backward compatible with existing 50/125 fiber, the aqua-colored N820-15M-OM4 is manufactured using top-quality materials. Dual male LC connectors are widely compatible and thoroughly tested to meet stringent insertion loss standards. It has 50/125 duplex (zipcord) fiber made from glass and a low-smoke zero-halogen (LSZH) jacket, which limits the amount of toxic smoke emitted in case of combustion, making this cable perfect for poorly ventilated areas.This laser-optimized multimode fiber (LOMMF) cable is ideal for LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers. It’s commonly used with vertical-cavity surface-emitting laser (VCSEL) and LED laser light sources. Complies with IEEE 802.3ae and TIA LOMMF standards.

Constructed with 50/125 micron cableLength: 1-meterUse on fiber and fibre channel installationsLC male to LC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: All glass graded indexCore diameter: Two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: AcrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumerical aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Fast, Clear Data Transmission Through Your LANData transfer speeds up to 10 GbpsIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsLC Connectors with Push/Pull TabsPush/pull tab connectors easy to install and remove with one handSturdy dual LC connectors tested to meet stringent insertion loss standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemodeFDDI- and OFNR-rated

MTP / MPO Push-Pull Connectors for Quick Fiber Optic connectionsPush/Pull tab connectors offer maximum accessibility in high density installations; install / remove with one hand12 times the density of SC style connectorsHigh Density design cuts down on installation costs50/125 OM3 Rated Multimode Fiber, 850nmPlenum rated jacketUnique cable ID label for Quality Control and TraceabilityEach cable 100% tested for low insertion loss and back reflectionTest data supplied with each cableCustom lengths available