Showing 2100–2110 of 2798 results

Internal Mini-SAS SFF-8087 to 4 x SATA 7pin cable, 18 inches long. Controller to four drives.

Connect two VGA monitors to a single DVI-I port or connects two DVI-I monitors to a single VGA port1 ft. DVI-A Analog Male to 2 x VGA (HD15) Female CableFully molded construction and double-shielding ensures long lifeSuperior video quality; supports video resolutions up to 2048 x 1536RoHS Compliant

Splits a stereo audio signal into two signalsAllows two headsets to attach to a single audio playerFully-molded construction

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 5 meter ( 16ft ) connectors: 2 ST connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze.Fiber made from glass (not a polymer)Color coded shrouds identify transmit and receiveFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 50M / Connectors: ST and LC Duplex connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

Singlemode duplex fiber optic SC/SC Ethernet cable is manufactured from 9/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.

12M (39-ft.) LC/LC, OM3 Rated10gb Ethernet speed to 300 meters @850nm Use with VCSEL and LED laser light sources High-Speed, High-Bandwidth, Low-Cost Backward compatible with legacy LAN's Ideal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

Constructed with 50/125 micron cable Length - 8 Meters ( 25-26ft ) Use on fiber and fibre channel installations LC male to LC male connectors Higher bandwidth optimized for gigabit and 10Gbps networks Backward compatible with 62.5 micron fiber Built-in headroom for future applications Number of fibers: 2 Fiber type: all glass graded index Core diameter: two 50+/-3 microns CLAD diameter: 125+/-2 microns Primary coating diameter: 245+/-15 microns Primary coating material: acrylate Secondary coating diameter: 900+/-50 microns Secondary coating material: PVC Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum Numeric aperture: .275 nominal Proof test level: 100,000 PSI Insertion loss testing performed on every connector (0.2db typical) and provided with cable Beveled edge on ends of glass makes insertion of plug a breeze

Multimode duplex fiber optic ST/LC Ethernet cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.

Allows Connection Between VGA-Enabled Computer and Monitor Up to 3 ft.Supports video resolutions up to 2048 x 1536, including 1080pRight-angle connector allows more room for connecting in tight spaces and moving connected equipment against a wallMade from mini-coaxial (RGB) and paired video wireFoil and braid shielding protects against EMI/RFI line noise that can distort or destroy dataMolded gold-plated HD15 male connectors and contacts provide maximum conductivity and minimize data lossIntegral strain relief protects cable and connectors from stress and crackingRugged PVC jacket designed for long life