Tripp Lite N266-003 Tripp Lite N266-003 networking cable Beige 35.8"" (0.91 m) Cat5 U/UTP (UTP)
These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.
Tripp Lite N366-01M-AP Tripp Lite N366-01M-AP fiber optic cable 39.4"" (1 m) Yellow
LC to SC/APC (Angle Physical Contact), 1Meter Fiber Patch cableManufactured from 9/125 duplex (zipcord) fiberPVC jacketLength: 1-meter. Connectors: 2 SC (Green ) and 2 LC connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Fiber optic distributed data interface (FDDI) ratedOFNR (riser rated)
Tripp Lite N366-03M-AP Tripp Lite N366-03M-AP fiber optic cable 118.1"" (3 m) LC SC Yellow
LC to SC/APC (Angle Physical Contact), 3 Meter Fiber Patch cableManufactured from 9/125 duplex (zipcord) fiberPVC jacketLength: 1-meter. Connectors: 2 SC (Green ) and 2 LC connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Fiber optic distributed data interface (FDDI) ratedOFNR (riser rated)
Tripp Lite N455-000-S Tripp Lite N455-000-S wire connector 2x LC Beige
This coupler provides a simple and easy way to link together two Singlemode fiber optic cables with LC connectors. Can be used with duplex or simplex cable assemblies.
Tripp Lite B078-101-PS2 Tripp Lite B078-101-PS2 KVM cable Black, Blue, Green, Violet
Needed to connect a PS/2 Server to a B070 / B072-Series NetCommander KVM switch via Cat5e cableEliminates the need for thicker, heavier KVM cablesCompact, lightweight designPlug and Play; no software requiredNo power supply requiredAllows a Server/CPU to be located up to 100-ft. (30.5 m) away from the KVM switchTo convert DisplayPort or HDMI computers to VGA, use adapters P134-06N-VGA-V2 or P131-06N
Tripp Lite N366-02M-AP Tripp Lite N366-02M-AP fiber optic cable 78.7"" (2 m) Yellow
LC to SC/APC (Angle Physical Contact), 2 Meter Fiber Patch cableManufactured from 9/125 duplex (zipcord) fiberPVC jacketLength: 1-meter. Connectors: 2 SC (Green ) and 2 LC connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Fiber optic distributed data interface (FDDI) ratedOFNR (riser rated)
Tripp Lite P138-000-DVI Tripp Lite P138-000-DVI DVI cable 7.87"" (0.2 m) Mini-DVI DVI-D White
This mini-DVI to DVI-D Digital Female Video Adapter Cable allows you to connect a DVI-D Display to the mini-DVI port found on some Apple computer models. Supports Single-Link digital transmission with resolutions up to 1920 x 1200 at 60 Hz.
Tripp Lite B055-001-PS2 Tripp Lite B055-001-PS2 KVM cable Black
This PS/2 Server Interface Unit connects a server with PS/2 keyboard/mouse ports to a B064-Series NetDirector® KVM switch using Cat5e/6 cabling. Use of Cat5e/6 cables frees up space in server cabinets that would otherwise be filled by traditional, bulkier KVM cable kits. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.Note: SIUs that were purchased prior to that of your KVM switch may require a firmware upgrade in order for them to work properly (see Maintenance under OSD Operation section in your B064-Series KVM Owner's Manual for details).
Tripp Lite B055-001-SER Tripp Lite B055-001-SER KVM cable Black
This Serial Server Interface Unit connects the DB9 male serial port on a server to a B064-Series NetDirector KVM switch using Cat5e/6 cabling. Use of Cat5e/6 cables frees up space in server cabinets that would otherwise be filled by traditional, bulkier KVM cable kits. Includes a USB cable for powering the unit. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.Note: SIUs that were purchased prior to that of your KVM switch may require a firmware upgrade in order for them to work properly (see Maintenance under OSD Operation section in your B064-Series KVM Owner's Manual for details).
Tripp Lite P568-003-SW Tripp Lite P568-003-SW HDMI cable 35.8"" (0.91 m) HDMI Type A (Standard) Black
180 degree swivel design is ideal for flat panel HDTV’s and other hook-ups where space is limitedSmooth and flexible 28 AWG jacket with protective mesh coverSupports iPad2 Video Mirroring when used with Apple Digital AV AdapterGold-plated connectors provide optimal signal transferPremium double-shielded cable protects against outside noise (EMI/RFI)Impedance-matched twisted-pair construction reduces cross-talk and interferencePerfect for connecting an iPad2 to an HDTV (video mirroring) to watch movies, play games, surf the web and display presentationsSupports Ultra High Definition (UHD) 4K video resolutions
Item(s) added to cart
Netgear GS105E-200NAS ProSafe Plus Switch, 5-Port Gigabit Ethernet - 5 Ports - 2 Layer Supported - Wall Mountable - Lifetime Limited Warranty-None Listed Compliance
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA