Showing 260–270 of 418 results

This high-strength composite, form-fit cradle was designed specifically for the Apple iPhone 11. Allowing for easy one-handed docking and removal of your iPhone 11, all buttons, cameras, ports, and speakers remain exposed and accessible. The 2-hole AMPS pattern on the back of the cradle and included hardware allows for the attachment of a RAM diamond ball base – compatible with a wide range of additional RAM components.

Featuring GDS® Technology™ for data and charging capabilities and a combination lock for theft deterrence, the GDS® Vehicle Dock for Zebra ET5x 10.1" series tablets allows you to connect up to two desired peripherals while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock's 5.5mm DC power jack, while peripheral support is provided by the built-in dual USB Type A cable. The dock also allows the tablet's scanning function to work through the cutout on the back which also accommodates tablet add-ons such as scanner, hand strap, and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone, or other handheld device. An included optional accessory bracket will allow you to connect RAM® 2-hole diamond bases for device mounting and features a cable management system.

RAM-VB-185-TABL3-SK is a No-Drill vehicle mount with Tab-Lock cradle and locking security knobs. The No-Drill base installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The Tab-Lock cradle includes a spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. With an emphasis on aesthetics and function, the security knobs are low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. The knobs are the perfect accessory for keeping your mounted electronic device safe from theft and tampering. Cradle Dimensions: Height: 8.25" to 9.875" Width: 6.38" to 7.75" Depth: 0.13" to 0.56"

Versatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to make some room or put your fishing rod within easy reach, the 15" pipe spline post for kayaks will do the trick. Getting your rod holder up high for stand up fishing is easy with this new product. The quick release female post and spline adaptor is simple and easy to release. Building on an already impressive line of Kayak products, this extension option is a simple add-on that is sure to add more fun and comfort to your day on the water.

Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.

The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.

The RAM-B-177-UN7U consists of a glare shield clamp base, short double socket arm and universal spring loaded X-Grip cradle for cell phones. Simply locate the clamp on any clamping surface up to 5/8" thick and gently snug the nylon thumb screws. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

The RAM-D-101U-C-NEC2 consists of a 3.68" diameter round base, SHORT length double socket arm (large knob) and 4.75" square plate with the VESA hole pattern. The 4.75" square plate has 4x100mm holes and 4x75mm holes in each corner. The 3.68" diameter round base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.

The RAM-B-400-A-HOL-UN7BU consists of the Tough-Claw rail clamp base, SHORT length double socket arm and universal spring loaded X-Grip cradle for phones. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.