Showing 90–100 of 418 results

Take your mobile entertainment on the road with the new RAM Torque handlebar and rail mounting base. We've paired a B-sized 1" rubber ball base that accommodates bars 3/4" 1" in diameter with a B-sized standard length arm the dynamic X-Grip for 7"-8" tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

The GDS® Slide Dock™ is a scalable solution for charging multiple devices at the same time. This version is compatible with Next Generation IntelliSkin® sleeves. Designed to be integrated into a cabinet or portable charging station, the GDS® Slide Dock™ has a magnetic base to quickly mount to any magnetic surface. The GDS® connector’s height can be easily adjusted to accommodate different devices. The adjustable height settings are numbered to quickly set up for any cart or charging station. This GDS® Slide Dock™ has a USB Type-A male output that can plug into an existing USB port on a cart or into the GDS® 6-port USB charger. There is an LED indicator light that turns red when your dock is connected to power. When your device is charging, the LED indicator will glow green.

This high-strength composite, form-fit cradle was designed specifically for the Apple iPhone 11. Allowing for easy one-handed docking and removal of your iPhone 11, all buttons, cameras, ports, and speakers remain exposed and accessible. The 2-hole AMPS pattern on the back of the cradle and included hardware allows for the attachment of a RAM diamond ball base – compatible with a wide range of additional RAM components.

Featuring GDS® Technology™ for data and charging capabilities and a combination lock for theft deterrence, the GDS® Vehicle Dock for Zebra ET5x 10.1" series tablets allows you to connect up to two desired peripherals while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock's 5.5mm DC power jack, while peripheral support is provided by the built-in dual USB Type A cable. The dock also allows the tablet's scanning function to work through the cutout on the back which also accommodates tablet add-ons such as scanner, hand strap, and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone, or other handheld device. An included optional accessory bracket will allow you to connect RAM® 2-hole diamond bases for device mounting and features a cable management system.

The RAM-B-177-UN7U consists of a glare shield clamp base, short double socket arm and universal spring loaded X-Grip cradle for cell phones. Simply locate the clamp on any clamping surface up to 5/8" thick and gently snug the nylon thumb screws. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.

The RAM-B-189-A-UN9U consists of a double 3.25" twist lock suction cup base, SHORT double socket arm, round base adapter and universal X-Grip cradle for 10" tablets. The double suction cup base is designed to have an "EXTRA STRONG" hold on glass and non-porous plastic surfaces. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use.