Showing 970–980 of 1201 results

The RAM-B-108BU-HUM1 consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU-HUM1 accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU-HUM1 base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108BU-HUM1 is an alternative mounting base for Beechcraft airplanes with a "throw over yoke".

The RAM-B-201-C-KRU, long double socket arm, has a socket at both ends that accommodate 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The knob has a locking Acorn nut that prevents the mount from being removed from the socket. This Feature allows for a secure mount while giving the ability to adjust your device without the ability to remove the device.

The RAM-B-238-VEN1U consists of a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond base. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Included is hardware that will attach the adaptor base directly to the Venom camera factory cradle.

The Tough-Wedge is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge to the mount. The 1" diamond ball base is compatible with all RAM-B size single and double socket arms.

The RAM-D-101-ID1U consists of a 3.68" diameter round base, STANDARD length double socket arm and 4.75" square plate. The 3.68" diameter round base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The 4.75" square plate contains 4x100mm holes and 4x75mm holes in each corner. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Weight Capacity: Up to 6 lbs. Plate Hole Patterns

The RAM-B-347U-TOM1 connects to the back of the factory cradle that is included with the purchase of the TomTom Rider 2/Urban Rider. The screws that are included with the RAM-B-347U-TOM1 match up with the threads on the back of the RIDER 2/Urban Rider.

Featuring GDS® Technology™ for data and charging capabilities, the GDS® Vehicle Dock for Zebra ET5x 8.3" & 8.4" series tablets allows you to connect a desired peripheral while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock's 5.5mm DC power jack, while peripheral support is provided by the built-in USB Type A cable and DB9 male connector. The dock also allows the tablets scanning function to work through the cutout on the back which also accommodates tablet add-ons such as scanner, hand strap, keyboard, mouse, joystick and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone, or other handheld device. An included optional accessory bracket will allow you to connect RAM® 2-hole diamond bases for device mounting and features a cable management system.

Available in lengths ranging from 4" to 30", the RAM Hand-Track is an ideal track and handrail solution for ATVs, boats, kayaks and more. Compatible with all RAM track mounts, the Hand-Track includes two top-loading end caps for attaching to a flat surface. To combine multiple tracks, pair with any top-loading Hand-Track Extension with Center Connector. Dimensions: Overall height: 2.5" Overall length: 18" Track length: 12"