This Sonim XP10 bundle includes the RAM® EZ-Roll'r™ Powered Key Locking Dock for Sonim XP10, double ball mount with RAM® Pin-Lock™ Security Knob, and a mounting bracket containing a speaker and microphone. This bundle secures your Sonim XP10 and keeps your peripherals together and connected as one unit. The powered dock features two integrated pogo pins that provide charging capabilities to the device through a male USB Type A connector and includes a key lock for extra security and peace of mind. The provided speaker connects to the Sonim unit using an included 10-pin to 3.5 audio adapter cable. Included with the complete bundle is a 10-30V modular vehicle hardwire charger.
The RAM® X-Grip® Phone Mount with Low-Profile RAM® Tough-Claw™ (RAM-HOL-UN7-404-2U) consists of the medium RAM® Tough-Claw™ base and universal RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® on round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.
The spring-loaded RAM® Quick-Grip™ with Low-Profile RAM® Tough-Claw™ (RAM-HOL-PD4-400-1U) consists of the small RAM® Tough-Claw™ base and large RAM® Quick-Grip™ phone holder, connected by the RAM® Pin-Lock™ adapter. The adjustable side arms ensure that your phone will remain secured in the holder without blocking any ports or buttons. With the RAM® Tough-Claw™ base connected, easily attach the Quick-Grip™ on round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter. This kit is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.
The RAM® EZ-Roll'r™ Powered Cradle for Sonim XP10 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. This powered cradle features two integrated pogo pins that provide charging capabilities to the device through a male USB Type A connector. Single-handed operation makes it easy to dock and remove the Sonim XP10—simply lift the top lever and pull out the device or place the bottom portion of the device in first and push in to lock in place. Compatible with RAM® two-hole AMPS pattern bases and the RAM® Microphone & PTT Speaker Bracket, this RAM® form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.
The RAM Universal No-Drill Laptop features a heavy-duty steel mounting base designed to fit the 2020-2023 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. The included RAM Tough-Tray is spring loaded to accommodate 10" to 17" laptops. The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support phones or other electronics.
This RAM No-Drill mounting system installs quickly and easily into the 2020-2023 Ford Police Interceptor Utility using the existing hardware of the passenger side seat rails. This configuration includes a 12” lower pole and 12" upper pole. Dual swing arms provide articulation for access to the mounted device. The round ball base attached to the end of the swing arm supports a variety of tablet and laptop holders, while RAM rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The RAM® EZ-Roll'r™ Powered Key Locking Cradle for Sonim XP10 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. This powered cradle features two integrated pogo pins that provide charging capabilities to the device through a male USB Type A connector and features a key lock for extra security and peace of mind. Single-handed operation makes it easy to dock and remove the Sonim XP10—simply lift the top lever and pull out the device or place bottom portion of the device in first and push in to lock in place. Compatible with RAM® two-hole AMPS pattern bases and the RAM® Microphone & PTT Speaker Bracket, this RAM® form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.
The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ (RAM-HOL-UN10-404-2U) consists of the medium RAM® Tough-Claw™ base and universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® on round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.
The RAM® EZ-Roll'r™ Keyed Locking Cradle for Sonim XP10 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. Features an integrated key lock for extra security and peace of mind. Single-handed operation makes it easy to dock and remove the Sonim XP10—simply lift the top lever and pull out the device or place the bottom portion of the device in first and push in to lock in place. Compatible with RAM® two-hole AMPS pattern bases and the RAM® Microphone & PTT Speaker Bracket, this RAM® form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.
Simply choose your preferred mounting location and the possibilities become endless with the TomTom Rider Flat Surface Mount. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your TomTom Rider is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA