Showing 270–280 of 720 results

The 550-sheet drawer supports A4, Letter and Legal sizes. Paper (20 to 47 lb., 75 to 176 gsm) and envelopes may be used from this drawer.

The Special Media Drawer enables you to feed quantities of custom-size media that range in 1 mm increments from 76.2 mm x 123.8 mm to 215.9 mm x 355.6 mm (3 in. x 4 7/8 in. to 8.5 in. x 14 in.). The minimum size supported in the drawer is 76.2 mm x 123.8 mm (3 x 4 7/8 inches). Paper (16 to 47 lb., 60 to 176 gsm), envelopes (16 to 28 lb, 60 to 105 gsm), labels, transparencies and card stock may be used from this drawer. Includes the 550-sheet tray. The Universal size setting formats the page for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software application. Paper size, paper and tray-present and tray-low sensing are supported. Size detection is enabled for A4, letter and legal paper as well as B6, C5 and #10 envelopes. Other standard sizes may be selected if automatic size detection is turned off. The optional caster base may be required when the product is configured with additional drawers or spacer and when used floor standing. Go to www.lexmark.com/multifunctionprinters for more information.

The Banner Media Tray is an extension of the Multi Purpose Feeder and allows the automatic feeding of up to 50 sheets of 24 lb. banner paper. It also serves as an extension of the output tray, to hold the printed banner paper as it exits from the printer. This tray supports banner paper in sizes from 8.27 to 8.5 inches wide (210 to 216 mm) to 14 to 48 inches long (355 to 1219 mm), for weights from 24 to 36 lb. (90 to 135 gsm). The stack height is 10 mm. Banner paper must be printed with Paper Weight set to Heavy All media which can be fed from the Multi Purpose Feeder can be used when the Banner Media Tray is attached. The tray cannot be used with a finisher, stacker or mailbox. Banner paper is not supported using duplex mode.

Paper Handling

PAPER TRAY for Machine: LEXMARK B3440DW/B3442DW/M1342/MB3442ADW/MB3442i/MS331DN/MS431DN/MS431DW/MX431ADN/MX431ADW/MX432ADWE/XM1342/XM3142

Fuser for Machine: LEXMARK CS921DE/CS923DE/CS927DE/CX920DE/CX921DE/CX922DE/CX923DTE/CX923DXE/CX924DTE/CX924DXE/CX927DE

The Staple Finisher supports single-position stapling for A4, A5, letter, legal, folio or oficio paper sizes, stapling up to 50 sheets per set (20 lb., 75 gsm). It also offers dual position job offset and job stacking. The output bin supports up to 500 sheets of unstapled paper (20 lb., 75 gsm). The stapler can staple a maximum of 50 sheets per set in A4, A5, Letter, Legal, Oficio or Folio sizes. Offset output is supported for A4, A5, JIS-B5, Legal, Letter, Folio, Executive, Oficio and Statement sizes Staple cartridges contain 5,000 staples. Refill staple cartridges are available in packages of 3 cartridges. Smart sensing indicates when the staple supply is low as well as empty. For additional output, one Offset Stacker or one 4-Bin Mailbox can be placed under the Finisher. The output bin supports stacking of paper, card stock and transparencies. The Staple Finisher supports finisher bin 'empty' and 'full' sensing.

PAPER TRAY for Machine: LEXMARK CS963E/CS963G/CX833G/CX833SE/CX833XG/CX833XSE/CX961G/CX961SE/CX961TG/CX961TSE/CX962G/CX962SE/CX962TG/CX962TSE/CX963G/CX963SE/CX963XG/CX963XSE/XC8355/XC9635/XC9645/XC9655