Showing 1990–2000 of 3933 results

We offer a high-quality fiber optic patch cable designed with MTRJ to SC termination, perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. The SC connector features a push-pull locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. - Connector: MTRJ to SC- Fiber Size: 62.5/125 micron- Type: Multimode; Duplex- Small footprint design of the MTRJ connector increases the port density- RJ style latch makes it easy to use- SC push-pull locking system- 100% optically inspected and tested for insertion loss- Molded form construction- Immune to electrical interference- Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer

We offer a high-quality fiber optic patch cable designed with MTRJ to SC termination, perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. The SC connector features a push-pull locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. - Connector: MTRJ to SC - Fiber Size: 62.5/125 micron - Type: Multimode; Duplex - Small footprint design of the MTRJ connector increases the port density - RJ style latch makes it easy to use - SC push-pull locking system - 100% optically inspected and tested for insertion loss - Molded form construction - Immune to electrical interference - Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer

We offer a high-quality fiber optic patch cable designed with MTRJ to SC termination, and is perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. The SC connector features a push-pull locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it.

We offer a high-quality fiber optic patch cable designed with MTRJ to ST termination, and is perfect for Ethernet, multimedia, or communication applications. The MTRJ terminator features a latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. The ST connector features a bayonet locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it.

Cables To Go offers a high-quality fiber optic patch cable designed with ST to SC termination, and is perfect for Ethernet, multimedia, or communication applications. The ST connector features a bayonet locking system and the SC connector features a push-pull locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber. - Connector: ST to SC - Fiber Size: 62.5/125 micron - Type: Multimode; Duplex - Features: - ST- Bayonet locking system - SC- Push-pull locking system - 100% optically inspected and tested for insertion loss - Molded form construction - Immune to electrical interference - Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.Features: - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applicationsSpecifications: - Connectors: (2) SC to (2) SC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Orange - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.Features: - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applicationsSpecifications: - Connectors: (2) SC to (2) SC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Orange - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. Features: - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applications Specifications: - Connectors: (2) LC to (2) SC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Orange - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applications - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Orange - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.Features: - Fully compatible with 50/125 multimode fiber applications - Use with both LED and VCSEL laser light sources - Designed for use in 10-Gigabit ethernet applications - Lifetime warranty against defects of materials and workmanshipSpecifications: - Connectors: (2) LC to (2) SC - Type: Laser-Optimized 50/125 Multimode Duplex - Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm - 10 Gigabit transfers up to 300m using 850nm VCSEL source - Jacket material: PVC (OFNR-rated) - Jacket color: Aqua