Showing 2040–2050 of 3933 results

Our multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. High-quality LC to ST Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Color coordinate your high speed single-mode fiber optic patching systems for easy identification Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

3.5mm Stereo Audio Cables are specifically designed for quality computer audio applications. The 3.5mm cable connects the PC sound card, portable CD player or any mini-stereo audio device with 3.5mm jacks to multimedia speakers. The cable features two 29-gauge stranded conductors and a drain wire, which are tinned to resist oxidation. The conductors and drain wire are wrapped with an aluminum foil shield to resist noise and interference. - Connecters: 3.5mm Stereo Male to 3.5mm Stereo Male - Fully molded connecters provide strain relief - Foil shielded to prevent unwanted EMI/RFI interference - Nickel-plated connectors - PC-99 color-coded to match computer speaker jack - Use: Connects PC sound card, portable CD player or any mini-stereo audio device with 3.5mm jacks to multimedia speakers

Get blazing-fast 10-Gigabit performance with plenum-rated laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit. - Fully compatible with 50/125 multimode fiber applications - Use with both LED and VCSEL laser light sources - Designed for use in 10-Gigabit ethernet applications - CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

Get blazing-fast 10-Gigabit performance with plenum-rated laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.- Fully compatible with 50/125 multimode fiber applications- Use with both LED and VCSEL laser light sources- Designed for use in 10-Gigabit ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit

Provides more performance than existing solutions and is hot pluggable! With eSATA cables from Cables To Go you can now utilize shielded cable lengths up to 2 meters outside the PC to take advantage of the benefits the SATA interface brings to storage. SATA is now out of the box as an external standard, with specifically defined cables, connectors, and signal requirements. eSATA provides more performance than existing solutions and is hot pluggable.

Provides more performance than existing solutions and is hot pluggable! With eSATA cables from Cables To Go you can now utilize shielded cable lengths up to 2 meters outside the PC to take advantage of the benefits the SATA interface brings to storage. SATA is now out of the box as an external standard, with specifically defined cables, connectors, and signal requirements. eSATA provides more performance than existing solutions and is hot pluggable.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. Features: - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Connectors: (2) SC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Green - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Color-code with this 9/125 micron cable for gigabit ethernet applicationsCost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to SC termination, this high-quality fiber optic patch cable is specificially designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 multimode fiber, immune to electrical interference.

Value Series S-Video cables are constructed with high-quality multiple conductors delivering high-quality video images. Separate conductors carry the Y-component (Chrominance) separate from the C-component (Luminance), providing better picture quality than a composite video cable. S-Video cables are commonly used for DVD players, satellite receivers, S-VHS VCRs, camcorders and interface with S-Video equipped televisions. S-Video cables also work with most PCs and notebooks with 7-pin TV-output jacks. - Connectors: 4-pin mini-DIN male to male. - Molded connectors with integrated strain relief. - Flexible PVC jacket.