LCD display Alpha-Numeric Display which displays system parameters and alarms. Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS conditions. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LCD display Alpha-Numeric Display which displays system parameters and alarms. Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS conditions. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
APC Smart-UPS VT 20kVA 208V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel CapableParallel-capacity capable: Increases total power capacity by using multiple UPSs simultaneously.Parallel-redundant capable: Power the connected equipment with multiple UPSs to increase system redundancy.Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Smart UPS signalling RS-232 cable, Start up included, User Manual
APC Smart-UPS VT 10kVA 208V w/1 Batt Mod Exp to 2, Start-Up 5X8, Int Maint Bypass, Parallel Capable
AvailabilityDual mains input. Increases availability by allowing the UPS to be connected to two separate power sources.Scalable runtime. Allows additional run time to be quickly added as needed.Hot-swappable batteries. Ensures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatible. Ensures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypass. Supplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallel. Delivers higher availability through redundant batteries.ServiceabilityUser-replaceable batteries. Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery replacement without tools. Allows quick, easy battery replacement.Automatic self-test. Periodic battery self-test ensures early detection of a battery that needs to be replaced.Shippable with modules installed. Enables pre-installation UPS staging and testing and faster installation.Modular design. Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.ManageabilityNetwork manageable. Provides remote management of the UPS over the network.InfraStruXure Manager Compatible. Enables centralized management via the APC InfraStruXure Manager.LCD display. Alpha-Numeric Display which displays system parameters and alarms.Audible alarms. Provides notification of changing utility power and UPS conditions.Programmable frequency. Ensures compatibility with different input frequencies.LED status indicators. Quickly understand unit and power status with visual indicators.SmartSlot. Customize UPS capabilities with management cards.Total Cost of OwnershipInput power factor correction. Minimizes installation costs by enabling the use of smaller generators and cabling.Temperature-compensated battery charging. Prolongs battery life by regulating the charge voltage according to battery temperature.Manual maintenance bypass. Reduces installation costs by eliminating the need for an external mechanical bypass.Intelligent battery management. Maximizes battery performance, life, and reliability through intelligent, precision charging.ProtectionFrequency and voltage regulation. Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.Safety-agency approved. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Cold-start capable. Provides temporary battery power when the utility power is out.
Parallel-capacity capableIncreases total power capacity by using multiple UPSs simultaneously.Parallel-redundant capablePower the connected equipment with multiple UPSs to increase system redundancyDual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallelDelivers higher availability through redundant batteries.
APC Smart-UPS VT, 24 kW / 30 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model. Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start up included, User Manual. - Parallel-capacity capable Increases total power capacity by using multiple UPSs simultaneously. - Parallel-redundant capable Power the connected equipment with multiple UPSs to increase system redundancy Availability - Dual mains input Increases availability by allowing the UPS to be connected to two separate power sources. - Scalable runtime Allows additional run time to be quickly added as needed. - Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced - Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. - Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. - Battery modules connected in parallel Delivers higher availability through redundant batteries. Serviceability - User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) - Battery replacement without tools Allows quick, easy battery replacement. - Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. - Shippable with modules installed Enables pre-installation UPS staging and testing and faster installation. - Modular design Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules. Manageability - Network manageable Provides remote management of the UPS over the network. - InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. - LCD display Alpha-Numeric Display which displays system parameters and alarms. - Audible alarms Provides notification of changing utility power and UPS conditions. - Programmable frequency Ensures compatibility with different input frequencies. - LED status indicators Quickly understand unit and power status with visual indicators. - SmartSlot Customize UPS capabilities with management cards. Total Cost of Ownership - Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. - Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. - Manual maintenance bypass Reduces installation costs by eliminating the need for an external mechanical bypass. - Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Protection - Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. - Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals. - Cold-start capable Provides temporary battery power when the utility power is out.
Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallelDelivers higher availability through redundant batteries.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery replacement without toolsAllows quick, easy battery replacement.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Shippable with modules installedEnables pre-installation UPS staging and testing and faster installation.Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.Network manageableProvides remote management of the UPS over the network.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure® Manager.LCD displayAlpha-Numeric Display which displays system parameters and alarms.Audible alarmsProvides notification of changing utility power and UPS conditions.Programmable frequencyEnsures compatibility with different input frequencies.LED status indicatorsQuickly understand unit and power status with visual indicators.SmartSlotCustomize UPS capabilities with management cards.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Manual maintenance bypassReduces installation costs by eliminating the need for an external mechanical bypass.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.Cold-start capableProvides temporary battery power when the utility power is out.
Modular, high-efficiency 3-phase UPS that is scalable as your data center grows up to 160kW/160kVA. Suitable for small, medium & large data center applications.Includes: Network Management Card, Start-Up Service, User Manual
Parallel-capacity capableIncreases total power capacity by using multiple UPSs simultaneously.Parallel-redundant capablePower the connected equipment with multiple UPSs to increase system redundancyDual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallelDelivers higher availability through redundant batteries.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA