Showing 140–150 of 1151 results

APC Symmetra RM Battery Module - Maintenance-free Lead Acid Hot-swappable - TAA Compliance

APC NetShelter Rack PDU Advanced, Switched Metered Outlet, 17.3kW, 3PH, 415V, 30A, 530P6, 48 OutletAPC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level power metering for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 48 outlets in a 2.2"" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

APC Replacement Battery Cartridge #24 Maintenance-free Lead Acid Hot-swappable

APC Rack PDU 9000 Switched APDU9941 - Power distribution unit (rack-mountable) - AC 200/208 V - 4992 VA - Ethernet 10/100/1000 - input: NEMA L6-30P - output connectors: 24 (21 x IEC 60320 C13/C15, 3 x IEC 60320 C19/C21) - 0U - 10 ft cord - black

APC by Schneider Electric AP9641 UPS Management Adapter - USB - TAA Compliance

APC APDU9959NA3 Rack PDU 9000 Switched, ZeroU, 20A, 208V - TAA Compliance 

APC SRT2200XLA Smart-UPS SRT 2200VA 120V - 2200 VA/1800 W - 120 V AC - Tower/Rack Mountable - 6 x NEMA 5-20R, 1 x NEMA L5-20R, NEMA 5-20P

APC by Schneider Electric Rack PDU, Switched, 1U, 20A, 120V, (8)5-20 - Switched - NEMA L5-20P - 8 x NEMA 5-20R - 120 V - 2400 W - Network (RJ-45) - 1U - Rack-mountable - TAA Compliance

APC by Schneider Electric Smart-UPS X 2000VA Rack/Tower LCD 100-127V with Network Card 4U Rack-mountable - 3 Hour Recharge - 11 Minute Stand-by - 120 V Input - 120 V AC Output - Sine Wave - USB - 1 x NEMA L5-20R, 3 x NEMA 5-20R, 6 x NEMA 5-15R - 10 x Battery/Surge Outlet - SNMP Manageable

Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)