Showing 410–420 of 603 results

USB 2.0 Hub Adds up to 10 USB Devices to Your Computer or LaptopThis USB hub with a sturdy plastic housing connects 10 USB devices, such as external hard drives, printers, keyboards/mice, MP3 players and barcode scanners, to your PC, laptop or other device with a USB-A port. The hub supports USB 2.0 data transfer rates up to 480 Mbps and is backward compatible with USB 1.1 devices. It provides easy-to-access USB ports to computers stored in cabinets, behind furniture or other hard-to-reach locations.Plug-and-Play Hub Is Convenient to Use All Over the WorldThe U223-010-INT requires no software to download and install. It connects to a host computer with the included USB-A to USB-B cable and draws power through the included external power supply. A blue LED indicates the unit is receiving power. Four included international plug adapters (North America, United Kingdom, Europe and Australia) ensure you can use this hub almost anywhere.

The U236-000-GBW USB 2.0 Gigabit Ethernet Adapter allows your computer to instantly connect to a Gigabit network through a USB port - no need to open up your computer case to add an internal Ethernet card. The adapter's compliance with USB 2.0 (480 Mbps) ensures true Gigabit network speed without any compromise. Furthermore, the adapter is compact and is USB bus-powered; requires no external power adapter.

The U244-001-R USB 2.0 to DVI/VGA External Multi-Monitor Video Card displays video on a DVI or VGA monitor or projector via your computer or laptop’s USB 2.0 port. You can extend video from your primary display to another, duplicate the same video on both displays or change the second display to your primary display. The adapter is an ideal tool for multitasking, viewing large spreadsheets, editing documents, giving presentations at trade shows or watching movies and playing games on large screens.You can add up to six U244-001-R external video graphics card adapters, each attached to its own USB 2.0 port, to connect a total of seven displays to the video source. Adding or removing a monitor is easy—no need to reboot the system afterward. No external power supply is necessary. First, install the drivers using the included CD. Then, connect the adapter to the display and the source using a DVI or VGA cable and the included USB 2.0 cable, respectively. A DVI-to-VGA adapter is also included for connecting to a VGA cable.The U244-001-R supports high-definition video resolutions up to 1920 x 1080 (1080p) @ 60hz and features 128 MB DDR SDRAM of memory. Compatible with 32- and 64-bit Windows 7 and later, as well as 32- and 64-bit Intel Mac OS X 10.8.3 and later / Mac 10.11. The adapter also works with Surface tablets running Windows 8 Pro or later / Windows 10.

Nano-Sized Dual-Band Wi-Fi Adapter Connects You to a Wireless Ethernet NetworkTiny enough to fit in the palm of your hand, this dual-band USB 2.0 Wi-Fi adapter plugs into the USB-A port on your laptop, tablet or desktop computer. It connects your device to a Wi-Fi network without having to rebuild any interior parts or replace a broken web card.Dual-Band Connectivity Lets You Connect to More Devices with Less InterferenceThe U263-AC600 supports dual 2.4 GHz (150 Mbps) and 5 GHz (433 Mbps) network connections to make sure you have plenty of bandwidth for both high- and low-intensity applications. The 2.4 GHz band is ideal for basic web tasks, such as web browsing, sending email or streaming music. The 5 GHz band is recommended for downloading large files, streaming HD video on Netflix or lag-free gaming. Compatible with the Most Recent IEEE Standards and Security MeasuresThis USB Wi-Fi adapter adjusts to a wide range of industry standards, including IEEE 802.11ac, and is backward compatible with 802.11a, 802.11b, 802.11g and 802.11n for integration with all wireless network devices. The U263-AC600 also supports 64- and 128-bit WEP/WPA and WPA2 one-key wireless security encryption.Miniature, Lightweight Design Perfect for Travel and StorageThe U263-AC600 features a 1T1R design (meaning the internal antenna both transmits and receives) and fits in a pocket or laptop bag for travel. To use the adapter, install the drivers specific to your laptop, tablet or computer (search ""U263-AC600"" at tripplite.eaton.com/support), and then connect the adapter to the USB port on your device. The adapter is compatible with Windows, Mac or Linux computers.

USB 3.0 to Gigabit Ethernet Adapter Connects You to a Wired 10/100/1000 Mbps NetworkThis USB 3.0 Gigabit Ethernet NIC network adapter instantly connects your computer, laptop, notebook, MacBook, Ultrabook or Chromebook to a 10/100/1000 Mbps network through a USB port. No internal Ethernet card is required. Just connect the built-in USB plug to your computer, and use a Cat5e/6 cable (sold separately) to connect the RJ45 end to a wired Gigabit Ethernet network. This network adapter is ideal for use in areas where Wi-Fi is unavailable or a wired connection offers faster speeds.Compliant with State-of-the-Art USB 3.0 SpeedsBecause this Gigabit Ethernet adapter complies with USB 3.0 (5 Gbps) specifications, you are ensured true 10/100/1000 Mbps network speed without a compromise in signal quality.Plug-and-Play Operation Lets You Begin Transferring Data Almost ImmediatelyNo external power is required. Just connect the adapter to both your computer and an RJ45 Gigabit Ethernet port for network access without the need to find an AC outlet. The lightweight unit is easy to carry in a pocket, purse, backpack or laptop bag for instant file transfers where needed. It’s compatible with Windows, Mac and Linux.Manufactured to Exacting Standards to Ensure a Full Ethernet ExperienceThis USB 3.0 Gigabit Ethernet adapter complies with IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab and 802.3az (Energy Efficient Ethernet) standards. It supports full- and half-duplex operations, suspend mode and remote wakeup via link-up and magic packet. Diagnostic LEDs indicate when you are connected to a network and when data is being transferred.

USB 3.0 to Gigabit Ethernet Adapter Connects You to a Wired 10/100/1000 Mbps NetworkThis USB 3.0 Gigabit Ethernet NIC network adapter instantly connects your computer, laptop, notebook, MacBook, Ultrabook or Chromebook to a 10/100/1000 Mbps network through a USB port. No internal Ethernet card is required. Just connect the built-in USB plug to your computer, and use a Cat5e/6 cable (sold separately) to connect the RJ45 end to a wired Gigabit Ethernet network. This network adapter is ideal for use in areas where Wi-Fi is unavailable or a wired connection offers faster speeds.Compliant with State-of-the-Art USB 3.0 SpeedsBecause this Gigabit Ethernet adapter complies with USB 3.0 (5 Gbps) specifications, you are ensured true 10/100/1000 Mbps network speed without a compromise in signal quality.Plug-and-Play Operation Lets You Begin Transferring Data Almost ImmediatelyNo external power is required. Just connect the adapter to both your computer and an RJ45 Gigabit Ethernet port for network access without the need to find an AC outlet. The lightweight unit is easy to carry in a pocket, purse, backpack or laptop bag for instant file transfers where needed. It’s compatible with Windows, Mac and Linux.Manufactured to Exacting Standards to Ensure a Full Ethernet ExperienceThis USB 3.0 Gigabit Ethernet adapter complies with IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab and 802.3az (Energy Efficient Ethernet) standards. It supports full- and half-duplex operations, suspend mode and remote wakeup via link-up and magic packet. Diagnostic LEDs indicate when you are connected to a network and when data is being transferred.

USB 3.1 to Gigabit Ethernet Adapter Connects You to a Wired 2.5G NetworkThis USB network adapter instantly connects your PC or laptop to a wired Gigabit network through a USB-A port. No internal Ethernet card is required. Ideal for settings in which no Wi-Fi is available or when a wired connection offers faster speeds, this USB 3.1 Gen 1 adapter lets you enjoy true 2.5 Gbps Ethernet speeds for uploading and downloading large files and streaming audio/video without buffering. Plug-and-Play Operation Gets You Online ImmediatelyThis bus-powered network adapter requires no external power source. Just connect the built-in USB 3.1 Gen 1 plug to your computer, and use a Cat5e/6 cable (sold separately) to connect the RJ45 end to a network. LEDs indicate when you’re connected to a network and when data is being transferred. The compact unit fits easily into a pocket, purse, backpack or laptop bag for instant file transfers where needed. It’s compatible with Windows, Mac, Chrome, Android and Linux.

Quickly Connects a SATA and/or IDE Drive to Your Computer’s USB PortThis USB-A to SATA/IDE Adapter connects a 2.5-, 3.5- or 5.25-inch SATA or IDE hard drive to an available USB-A port on your laptop or computer. This lets you back up important data, retrieve data from an old hard drive or store information on an external drive that you can take with you to another computer. Blue LEDs indicate successful connection and data transfer.Compatible with SATA and IDE Drives Up to 4 TBThe U338-06N accepts SATA III (6 Gbps), SATA II (3 Gbps) and SATA I (1.5 Gbps) drives for sharing large files, such as music and video, at speeds up to 5 Gbps. It features 40- and 44-pin IDE ports, as well as 7-pin SATA data and 15-pin SATA power (via adapter cable) connectors. Necessary SATA and Molex cables are included.Easy to UseThe plug-and-play adapter requires no additional software to download. SATA and Molex cables and an external power supply are included. The U338-06N is compatible with all USB-enabled operating systems.

The U339-001-FLAT USB 3.0 to SATA Hard Drive Lay-Flat Enclosure allows you to quickly and easily add storage and transfer data to your computer or laptop from a SATA hard drive. It lays flat to take up little space and maintain stability. Just insert a 2.5-in. or 3.5-in. SATA HDD (Hard Disk Drive) or SSD (Solid State Drive) into the slot, and connect the included 1.22 m USB 3.0 cable to the USB port on your computer. Slide the protective cover over the dock, even when it’s in use, to keep the SATA drive dust-free at all times. The docking station accepts SATA III (6 Gbps), SATA II (3 Gbps) and SATA I (1.5 Gbps) drives. It supports USB 3.0 (5 Gbps), USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) transfer speeds, as well as UASP (USB Attached SCSI Protocol), which transfers data faster thanconventional USB 3.0 and requires a UASP-enabled host controller. Plug-and-play configuration means it works right out of the box with no software or drivers to download or install. Green LED indicates the unit is connected to a USB port. Blue LED indicates the unit is receiving power. Works with Windows and Mac.Easy to Use Right from the Box ● Lays flat for stable performance ● Plug and play—no extra software or drivers to download or install ● SATA drive slides easily into convenient slot ● Protective cover keeps dust and dirt away from sensitive SATA drives ● On/off button powers off SATA drive when not in use ● LEDs indicate when the unit is powered on and connectedCompliant with Most Applications ● Accepts 2.5-in. or 3.5-in. SATA III (6 Gbps), SATA II (3 Gbps) and SATA I (1.5 Gbps) drives ● Supports USB 3.0 (5 Gbps), USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) transfer speeds ● Supports UASP (USB Attached SCSI Protocol) for even faster transfer speeds than USB 3.0* ● Works with both HDD (Hard Disk Drive) and SSD (Solid State Drive)*Requires UASP-enabled host controller. UASP is supported by Windows 8 and later, Mac OS X 10.8 and later, and Linux. ● Compact, stable lay-flat design ● No software or drivers to download or install ● Compliant with USB 3.0, USB 2.0 and USB 1.1 transfer rates ● Compliant with SATA HDD or SSD drives up to SATA III ● Protective cover keeps SATA drive free of dustSystem Requirements ● Computer with available USB port (USB 3.0 port required to achieve USB 3.0 data transferspeeds) ● 2.5-in. or 3.5-in. SATA HDD or SSD ● UASP-enabled host controller (for UASP data transfer speeds only)Package Includes ● U339-001-FLAT USB 3.0 to SATA Hard Drive Lay-Flat Enclosure ● USB 3.0 A/B cable, 1.22 m length ● External Power Supply with NEMA 1-15P Plug (Input: 100–240V, 50/60 Hz, 0.8A; Output: 12V, 2A, 1.52 m) ● Quick Start GuideBatteries not Required to Operate

Connects a Larger Display to Your Notebook or Laptop ComputerThis external video adapter allows you to reproduce the image on your laptop screen on a larger display. Just connect the U344-001-R’s detachable USB cable to your computer’s USB port, and connect the adapter’s DVI port to a DVI-enabled monitor, HDTV or projector with a user-supplied DVI cable (sold separately). A DVI-to-VGA adapter is included for connecting the adapter to a display’s VGA port.Swap Video to a Second Display Without the Hassle of Function KeysYou can extend video across both screens, do multiple presentations from a single computer, or play video on one display while working on another. You can use up to six U344-001-R adapters at the same time, adding as many as six additional displays and extending a video signal across all of them.Supports High-Definition 1080p VideoThe U344-001-R supports HD video resolutions up to 2048 x 1152, including 1080p, at 60 Hz. Featuring 512 MB DDR2 SDRAM of memory, the plug-and-play adapter is bus-powered, so no external power adapter is required. It supports USB 3.2 Gen 1 data transfer rates up to 5 Gbps, and is backward compatible with USB 2.0.Broadly Compatible with Most Major Operating SystemsThe U344-001-R works with Windows 7 and later (32- and 64-bit), Intel Mac OS X 10.8.5 and later, Mac 10.11 (32- and 64-bit), and Surface tablets running non-RT Windows 8, 8.1 and 10. Check the owner’s manual for system requirements when using multiple adapters or using the add-on monitor for DVD playback.