Showing 510–520 of 603 results

For Powering and Controlling Your Eaton NRFP Robotic Fiber Panel SystemThe NRFP-LCU-1 comes with a logic control unit, a signaling cable that attaches to your Eaton NRFP-500MM-CP or NRFP-500SM-CP Robotic Fiber Panel System, and a ground cable that connects to the facility ground. It mounts into 1U of space anywhere in your 4-post rack enclosure, including directly above the Robotic Fiber Panel System, which allows adequate space for connecting the LCU control and ground cable. The power cable connections are located on the front panel, as are three LEDs that indicate the system’s functional status at a glance.

USB-C to HDMI Adapter Connects to Your Computer’s USB-C or Thunderbolt 3 PortThis USB Type-C to HDMI adapter (M/M) connects an HDMI monitor, projector or television to the USB-C or Thunderbolt 3 port on your desktop computer, tablet, laptop, notebook, MacBook, Chromebook or smartphone. It’s an ideal connector for multitasking, presenting video at trade shows and conferences, editing documents, playing online games and watching movies on a larger 4K screen. No other adapter or cable is needed to complete your 4K connection.Supports USB-C DisplayPort Alternate Mode for Converting Audio/Video SignalsBy connecting the USB-C cable to a source device that supports USB DisplayPort Alt Mode, you can output 4K video and digital audio to an HDMI monitor, television or projector without installing special software drivers.Enjoy the Clarity of True 4K HDMI Video with Multi-Channel Audio and 4:4:4 ColorThis 4K HDMI cable supports Ultra HD video resolutions up to 4096 x 2160 (4K x 2K) at 60 Hz for crystal-clear picture and sound, as specified in HDMI 2.0. It’s compatible with HDCP 2.2 as well as backwards compatible with HDCP 1.4. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor, as well as 36-bit Deep Color (12 bits per channel). The cable is backward compatible with non-4K displays, so you can use a 1080p monitor if one is available.Reversible USB-C Connector Attaches in Either DirectionUnlike traditional USB cables that connect in only one direction, the reversible USB-C male connector plugs into a USB-C or Thunderbolt 3 port in either direction for a fumble-free connection every time.Ready to Use Right from the Package, So You Can Plug and Play ImmediatelyThe plug-and-play USB Type-C to HDMI cable requires no software or external power. Just connect the USB-C plug to the USB-C or Thunderbolt 3 port on a source device that supports USB DisplayPort Alternate Mode, and connect the HDMI plug to your display. The three-foot USB 3.1 Gen 1 cable is backward compatible with previous USB and HDMI generations, so you can use it with legacy equipment.

Cable Ladder Ceiling Support Kit Secures Your Data Center’s Runway SystemThis lightweight SmartRack cable runway ceiling support kit creates a secure point of attachment from the ceiling of your server room or data center to a ladder section. It includes two brackets that connect to the ceiling and two brackets to support the cable runway. Threaded rods and appropriate fasteners are not included. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The innovative SRLCEILINGKIT is designed for use with SRCABLELADDER, SRCABLELADDER18, SRL90BEND12, SRL90BEND18 and other compatible 12-inch (305-millimeter) and 18-inch (457-millimeter) straight and 90-degree ladder sections.

Cable Ladder Center Support Kit Secures Your Data Center’s Runway System to the CeilingThis SmartRack cable runway center support kit creates a single point of attachment from the ceiling of your server room or data center to a ladder section. All mounting and installation hardware is included, except for the threaded rod (because of variable ceiling heights) and appropriate fasteners to secure the durable steel wall bracket. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLCNTRSPPT12 is designed for use with 12-inch (305-millimeter) SRCABLELADDER, SRL90BEND12 and other compatible straight and 90-degree ladder sections.

Cable Ladder Center Support Kit Secures Your Data Center’s Runway System to the CeilingThis SmartRack cable runway center support kit creates a single point of attachment from the ceiling of your server room or data center to a ladder section. All mounting and installation hardware is included, except for the threaded rod (because of variable ceiling heights) and appropriate fasteners to secure the durable steel wall bracket. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLCNTRSPPT18 is designed for use with 18-inch (457-millimeter) SRCABLELADDER18, SRL90BEND18 and other compatible straight and 90-degree ladder sections.

Convenient Cable Retaining Post Secures and Organizes Cables on Your Ladder SystemThis exclusive SmartRack cable retaining post kit creates a secure retaining point between sections of cable ladder to increase the cable runway system's volume. It helps you route stubborn cables, allowing for sharper turns and preventing cabling from flowing over the edge of the ladder. All mounting and installation hardware is included. The cable retaining kit fits solid and tubular steel runway measuring 1.5 x 0.375 inches (38 x 9.5 millimeters). The SRLPOST is designed for SRCABLELADDER, SRCABLELADDER18, SRL90BEND12, SRL90BEND18 and other compatible straight and 90-degree ladder sections.

Cable Ladder Bracket Kit Secures Your Data Center’s Runway System Vertically to a WallThese cutting-edge SmartRack cable runway vertical wall brackets create a secure connection to the wall of your server room or data center. User-supplied hardware is required to secure the durable brackets to the wall. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLVRTBRKT is designed for straight cable runway measuring 1.5 x 0.375 inches (38 x 9.5 millimeters) in diameter, including SRCABLELADDER and SRCABLELADDER18.

Cable Ladder Bracket Kit Secures Your Data Center’s Runway System on a WallThis SmartRack cable runway wall support kit creates a secure connection between your server rack and the wall of your server room or data center. All mounting and installation hardware is included for attaching a ladder to a wall, except for appropriate fasteners to secure the durable steel wall bracket. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLWALLSPPT12 is designed for use with 12-inch (305-millimeter) SRCABLELADDER, SRL90BEND12 and other compatible straight and 90-degree ladder sections.

Cable Ladder Bracket Kit Secures Your Data Center’s Runway System on a WallThis SmartRack cable runway wall support kit creates a secure connection between your server rack and the wall of your server room or data center. All mounting and installation hardware is included for attaching a ladder to a wall, except for appropriate fasteners to secure the durable steel wall bracket. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLWALLSPPT18 is designed for use with 18-inch (457-millimeter) SRCABLELADDER18, SRL90BEND18 and other compatible straight and 90-degree ladder sections.

Cable Runway E-Bend Creates a 90-Degree Gradual Sweep for Horizontal Cable Ladder RunsThe SmartRack SRL90BEND12 allows you to place a curved right angle in your horizontal cable runway application. It connects to your 12-inch cable runway above your rack enclosure or open frame rack to allow flexibility in your overhead cable routing. Install it either parallel or perpendicular to the rack for clean, organized cable routing across an aisle or within a row.Measures 12 in. Wide with a 27 in. Wide BendThis cable E-bend conforms to minimum-bend radius requirements (typically four times the cable diameter). It’s made from lightweight tubular steel measuring 1.5 x 0.375 inches (38 x 9.5 millimeters). It fits 12-inch (305-millimeter) cable runway widths, and meets Cat5e/6/6a requirements.Designed for Use with Rack Cabling ComponentsThe SRL90BEND12 ships fully assembled for connecting right out of the package. It’s compatible with 12-inch SRCABLELADDER and SRLBUTTSPLICE kit for toolless assembly. All accessories are sold separately.