Showing 970–980 of 2798 results

Compact gold gender changer is designed to allow you to change a DB9M port into a DB9F port. Gold plated contacts and connectors provide superior conductivity.

Send High-Quality DisplayPort 1.2 Audio/Video Signals to an HDMI DisplayConnects DisplayPort 1.2 computer to HDMI-enabled monitor, projector or TVIdeal for displaying video on large monitor or digital signFemale HDMI and male DisplayPort connectorsBackward compatible with previous DisplayPort generationsVibrant, Superior Video QualitySupports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) @ 24/30 HzSupports 7.1 Audio Surround SoundHDCP 1.3 and DPCP 1.0 compliantConverts both Single-Mode and Dual-Mode DisplayPort output Works with graphics cards that don’t output DP++ signals, such as AMD EyefinitySuperior Materials for Superior PerformanceGold-plated connectors and contacts for excellent conductivityIntegral strain relief for long lifePlug-and-play—no software, drivers or power supply necessaryFits easily into briefcase, backpack or laptop bag

3.05 m Cable Kit with Dual DVI and USB Ports Connect Monitor/Keyboard/Mouse to Your KVMThis KVM cable Kit allows you to connect a DVI monitor and USB keyboard/mouse to your switch’s DVI port. Designed as a replacement for the 1.83 m accessory cable included with Tripp Lite’s B021-000-19-HD or B021-000-19-HD2 1U rack-mount consoles, the 3.05 m P760-010-DVI is ideal for scenarios in which a longer cable is needed. It features two male DVI connectors and two male USB-A connectors, and supports DVI video resolutions up to 1920 x 1200, including 1080p, at 60 Hz. Its slim diameter cuts down on cable clutter around your rack.Typical Application● Connect a keyboard, mouse and DVI-enabled monitor to a KVM switch● Upgrade or replace a worn or lost KVM cable● Extend the distance between the switch and monitor/keyboard/mouse to 3.05 m

The P046-06N-T Heavy-Duty Power Adapter Cord features a locking NEMA L5-20P plug on one end and a straight-blade 5-15/20R connector on the other, allowing you to convert a power cord with a 5-15P or 5-20P plug for use with a locking L5-20R outlet. Establish a power connection by attaching the 5-15/20R end to your electronic component and the L5-20P plug to a PDU, UPS or other compatible AC power source. The molded locking connector twists into place, preventing disconnection via jostling or other accidental impact. The six-inch 12 AWG cord is rated for 125V and 20A and meets UL safety standards. The durable SJTW jacket is designed to last a long time.

Tripp Lite Power Extension Cord - L6-30P to L6-30R. Constructed with 3 x 10AWG copper conductors, fully molded ends and 250V/30A rating.- Molded, Heavy-Duty Power Extension Cord, 8ft.- NEMA L6-30P to NEMA L6-30R- 10AWG x 3C, SJT, 30A, 250Volt- RoHS Compliant

Extends the length of your existing hospital-grade power cord with NEMA 5-15P plug by 2 ft. Recommended for hospitals and other medical facilities.- Conforms to hospital-grade power cord standards- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 42- 125V/13A rating- Fully molded ends- Gray hospital-grade NEMA 5-15P HG and NEMA 5-15R HG connectorsThe P022-002-GY-HG Hospital-Grade Power Extension Cord features a NEMA 5-15P HG plug on one end and a NEMA 5-15R HG receptacle on the other, allowing you to extend the length of your existing hospital-grade power cord by two feet. This cord is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 42 standards, ensuring it’s a safe, reliable power solution for hospital environments. This two-foot 125V/13A cord features 16 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.Safe, Reliable Power Solution for Hospital Environments- Extends an existing hospital-grade power cord by 2 ft.- Gray hospital-grade NEMA 5-15P HG and NEMA 5-15R HG connectors- Conforms to hospital-grade power cord standardsOptimum Construction- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 42- 16 AWG wire- Flexible SJT jacket- Fully molded ends- 125V/13A rating

Up- and Down-Angle Cat6 Ethernet Cable Connects Equipment in Data Centers and VoIP NetworksThis Cat6 cable is ideal for connecting network components, such as printers, computers, copiers, routers, servers, modems and switches, in hard-to-reach areas of space-constrained high-density data centers. Designed for fast transmission and excellent signal quality, this RJ45 patch cable ensures data transfer speeds up to 1 Gbps throughout your Gigabit Ethernet or VoIP network.Special Slim Design for Better Airflow and Easier Installation in Crowded RacksThis Cat6 UTP patch cord is more than 38% smaller in diameter than standard Cat6a cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also cuts down on clutter in crowded racks and patch panels, and makes the cable easier to install around corners and through cable management panels.Up- and Down-Angle RJ45 Patch Cable Makes Connecting and Disconnecting EasierBoth RJ45 male connectors are designed at 90-degree angles: one upward, the other downward. This helps prevent excessive bending and reduces stress on the cable. This space-saving cable is easy to plug into patch panels, switches and other devices located in a confined area or behind a desk.Blue Jacket to Avoid Misidentification That Can Cause Costly DowntimeThis up/down-angle Cat6 Ethernet cable features a blue PVC jacket and molded blue ends. The blue color allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.

Connect a Displayport enabled Monitor to a MAC Mini-Displayport video portPlug and Play - no drivers or setup neededDisplayport 1.1a CompliantHDCP CompliantSupports resolutions up to 2560 x 1600 @ 60Hz

Double Shielded (Foil and Braid) RG59B/U Cable24K Gold Plated screw type F connectorsFully molded ends ensure long life useUse with Cable or Satellite Receivers, VCR, DVD, Coax enabled TV

The N261-S01-BL Cat6a 10G Snagless Molded Slim UTP Network Patch Cable (M/M) is ideal for connecting network components like computers, servers, routers, printers, patch panels and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this 1-ft. (0.31 m) blue cable ensures peak performance throughout your local area network (LAN).Manufactured from 28 AWG copper wire, the four-pair stranded UTP N261-S01-BL delivers Ethernet speeds up to 10 Gbps. Protected by a PVC jacket, this cable is more than 38% smaller in diameter than standard Cat6a cable, which increases airflow in tight spaces and makes it easier to install around corners and through cable management panels.RJ45 male connectors are conducive to an accurate signal transfer, improving near-end crosstalk (NeXT) performance to 500 MHz. The snagless design protects the locking tabs against being damaged or broken off during installation. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.Each cable has been tested and certified using Fluke® test equipment. It supports IEEE 802.3af, is DTE power compliant and is compatible with T568A/T568B wiring.