Superior molded cables with foil/braid shielding for maximum EMI/RFI protectionDual Link digital signaling for transmission speeds to 9.9Gbps and 2560x1600 ResolutionGold plated copper contacts ensure excellent conductivity Meets DVI DDWG StandardPC and Mac compatibleFor use with Digital CRT displays, Flat Panel Displays, HDTV and Projectors
The U026-025 USB 2.0 Hi-Speed Active Extension Cable (M/F) increases the length of a device cable an additional 25 feet (7.6 meters) with no danger of signal loss or decrease in performance. Connect the male plug to a USB port on your computer or hub and the female end to a USB device cable. A built-in bus-powered signal booster ensures peak USB 2.0 signal quality. Backward compatible with previous USB generations, this active USB extension cable supports data transfer rates up to 480 Mbps.The U026-025 works with all computers, devices and cables with USB-A connectors, and provides up to 150mA of power to the connected device. An external power supply or powered USB 2.0 hub is necessary if the connected device requires more than 150mA.Premium foil and braid shielding delivers reliable, error-free signal quality and protection from EMI/RFI line noise that can distort or destroy data. Molded gold-plated connectors with corrosion-resistant gold-plated contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.
6-ft. USB 2.0 A to USB Type-C (USB-C) device cableConnect devices with a USB Type-C connector to a USB charger, or the USB port on your laptop, ultrabook or computerUSB Type-C connector is reversible, so there is no guessing on which way to plug it in.....it connects in either direction!Supports USB 2.0 data transfer rates up to 480MbpsBackward compatible with previous USB generationsGold plated contacts and molded ends provide a lifetime of use28AWG Data Pair / 22AWG Power pair
Send High-Quality DisplayPort v1.2 Video Signals to a VGA DisplayConnects DisplayPort computer to VGA-enabled monitor, projector or TVIdeal for displaying video on large monitor or digital signLow-profile VGA connector fits neatly into available space; no jamming between wall and monitor or impeding neighboring connectionsHD15 and latching DisplayPort male connectorsNo separate adapter requiredVibrant, Superior Video QualitySupports computer video resolutions up to 1920 x 1200Supports HD video resolutions up to 1920 x 1080 (1080p)Converts Single-Mode and Dual-Mode (DP++) DisplayPort outputPerfect for use with graphics cards, such as AMD Eyefinity, that do not output DP++ signalsSuperior Materials for Superior PerformanceDouble shielding with foil and braid for maximum EMI/RFI protectionNickel-plated connectors with gold-plated contacts for excellent conductivityLatching DisplayPort plug for secure connectionIntegral strain relief for long life
Tripp Lite's 2-Metre, single mode duplex fiber optic LC/SC patch cable is manufactured from 8.3/125 zipcord fiber. The cable has SC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications. - Premium PVC 8.3/125 micron singlemode patch cables - Attenuation loss meets or exceeds the latest industry standards - Twice the bandwidth throughput of multimode cable System Requirements - Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SCconnectors - 2-Metre Duplex Single mode Fiber Patch Cable, LC/SC - Manufactured from 8.3/125 duplex (zipcord) fiber - PVC jacket - Length: 2-Metre. Connectors: 2 SC and 2 LC connectors on each end - Insertion loss testing performed on every connector (0.2db typical) and provided with cable - Beveled edge on ends of glass makes insertion of plug a breeze - Fiber made from glass (not a polymer) - Fiber optic distributed data interface (FDDI) rated - OFNR (riser rated)
DisplayPort to HDMI Adapter Connects a 4K HDMI Monitor to Your ComputerExpand the potential of your DisplayPort computer or notebook by connecting it to a 4K HDMI-enabled television, monitor or projector. This active converter helps you transmit digital audio and 4K video from the DisplayPort 1.2 output on your PC, Mac, Chromebook, MacBook, Microsoft Surface or other compatible computer or tablet. It’s an ideal tool for working in high-definition photography, videography or cinematography, as well as streaming video for digital signage in crystal-clear 4K.More Convenient, Less Expensive Way to Watch 4K VideoThis active adapter features a male DP connector and a female HDMI connector, allowing you to continue using your existing HDMI display and HDMI cable (such as P568-Series cables) to transmit video signals without the expense of a new DP display.Transmits Crystal-Clear 4K HDMI Video with HDR and 4:4:4 ColorThe P136-06N-HDR-W supports Ultra HD video resolutions up to 4K at 60 Hz (3840 x 2160). It’s compatible with HDMI standards for carrying HDR signals, which provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This adapter supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Ready to Use Right from the Package, So You Can Plug and Play ImmediatelyThe plug-and-play DisplayPort to HDMI active converter requires no software, drivers or external power. It’s compatible with both Single- and Dual-Mode (DP++) DP output and is recommended for use with graphics cards that do not output DP++ signals. The compact unit fits easily into a briefcase or laptop bag for connecting on the go. The P136-06N-HDR-W is backward compatible with 1080p displays and pre-1.2 DisplayPort sources, allowing you to use the adapter with older equipment.
The Ideal Solution for All High-Speed Cat5/5e/6 NetworkingConnects high-speed network components, such as computers, printers, video game systems, Blu-ray players, copy machines, routers and modemsDesigned for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applicationsRecommended for home or office applicationsProvides high-speed connections up to 550 MHz/1 GbpsFlawless signal delivery with minimal near-end crosstalk levelsPremium Construction Ensures Error-Free Signal TransferManufactured from 24 AWG 4-pair solid UTP with staggered-pin plug designMolded RJ45 connectors and gold-plated copper contacts for maximum conductivity and minimum data lossIntegral strain relief protects cable and connectors from stress and crackingMeets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)
Connects a DVI Display to Your USB-C or Thunderbolt 3 DeviceThis USB to DVI adapter helps you transmit video from your tablet, laptop, Chromebook, MacBook, smartphone or PC to a DVI-enabled television, monitor or projector. It’s ideal for giving video presentations in conference rooms and classrooms, editing multiple documents on a larger screen or streaming video for digital signage in crystal-clear 1080p.Supports USB DisplayPort Alternate Mode for Transmitting Video SignalsWith a source device that also supports USB DisplayPort Alt Mode, you can extend video from your primary display to another, duplicate the same video on both displays, or change the second display to your primary.Transmits Crystal-Clear 1080p Video to a DVI DisplayTo send high-definition video to a DVI television, projector or monitor, connect the DVI port to the display using a DVI cable (sold separately). The DVI port supports HD video resolutions up to 1920 x 1080 (1080p) at 60 Hz, 36-bit Deep Color (12 bits per channel) and DVI digital transfer rates up to 6.75 Gbps (2.25 Gbps per channel). The U444-06N-DVIBAM is also compatible with non-1080p DVI displays.Built-In USB-C Cable Connects in Either DirectionConnect the reversible USB-C plug to your source device’s USB-C or Thunderbolt 3 port. The fumble-free USB-C plug connects in either direction to ensure fast, easy connection every time.Ready to Use Right Out of the PackageThe plug-and-play Thunderbolt 3 and USB-C to DVI adapter requires no software, drivers or external power. It’s about half the size of a credit card, making it easy to carry in a pocket, briefcase or laptop bag for connecting on the go.3-Year Warranty and Environmentally Responsible DesignThe U444-06N-DVIBAM comes with a 3-year warranty. It’s manufactured in compliance with strict RoHS specifications.
Cabling for category 5 (Cat5) and 5e (Cat5e) applicationsLength: 50-ft. color: black connectors: RJ45 maleFeature molded connectors with integral strain reliefSnagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installationPVC 4-pair Solid UTPRated for 350MHz/ 1Gbps communicationMeets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 5e draft 11)Available in other colors and lengthsAlso available without the snagless feature (N002 series)Also available - Cat6 cables (N201 series)
Supports USB 3.2 Gen 2Recommended for smartphones, tablets, laptops, computers, external hard drives, hubs and other compatible devicesData transfer speeds up to 10 Gbps—20 times faster than USB 2.0USB-B male connectorBackward compatible with previous USB generationsUSB-C Male ConnectorFumble-free reversible plug ensures fast, easy connection every timePremium Construction for Superior Signal TransferFoil and braid shielding for error-free signal quality and EMI/RFI protectionMolded nickel-plated connectors and gold-plated contactsIntegral strain relief for long lifeRugged PVC jacket
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA