A Refreshing Take on Network ManagementThe D-Link DNH-100 Wireless Controller is a centralized wireless LAN manager developed specifically for our Nuclias Connect management solution and is suitable for small to medium-sized business (SMB) IT infrastructure. It comes preloaded with Nuclias Connect network management software, which is a key asset for businesses where IT skills are limited by financial or other constraints.Tasks can be centralized and automated, meaning the DNH-100 is highly suited for remote deployment where either dedicated onsite staff are unavailable, or servers, PCs and other devices that can run the software might not be viable.Better-Than-Expected Performance at a Smaller-Than-Expected PriceThe DNH-100 is unbeatable value for money, delivering real value at a lower-than-expected price. Its backwards compatibility with a variety of legacy AP’s means no need to unnecessarily replace older but still functioning hardware, better for your wallet and the planet.With the ability to support up to 100 APs and a variety of business tools including Captive Portal, Payment Gateway Integration and Front Desk Ticket Management. Accordingly, all these top-notch capabilities can all be centralized thanks to the Nuclias Connect management software to reduce admin cost and fulfil most of SMBs networking and day-to-day demands.Big Things Come in Small PackagesDespite its modest size, the DNH-100 offers the same Nuclias Connect management functionality of a larger device.With a 1000Base-T Ethernet port, a USB 3.0 port, a Micro SD slot as well as support for IEEE 802.3ab/u/x, it’s fully equipped for all occasions. Furthermore, manage up to 100 APs at one time, create and configure AP profiles, multiple SSID settings, access control, VLANs, time-based rules, bandwidth and performance. Control ranges from all-encompassing down to a single AP, so that fine-tuning your network via the connect software is effortlessly simple.A Network That Can Look Out for ItselfThe DNH-100 features self-organizing and self-optimizing capabilities such as interval-based radio scanning and analysis, self-management of radio frequency, as well as L2/L3 AP discovery and output power. Combined with other self-healing capabilities, it can maintain stability and continue operating at optimal levels even during peak usage times, so you can rest assured users are getting the best service possible.An End to an Endless Number of AccountsNuclias Connect enables an extensive understanding of your network and its users through traffic analytics and status reports, which can be viewed at a glance. Insights derived from this data provide actionable intelligence which businesses can use to create business value. Traffic can be viewed across the entire network, down to the level of a single AP. Capacity and growth can be evaluated, as well as any irregularities that may arise, allowing for easier troubleshooting.Real-Time Analytics & Reporting, All on an Intuitive InterfaceNuclias Connect enables an extensive understanding of your network and its users through traffic analytics and status reports, which can be viewed at a glance. Insights derived from this data provide actionable intelligence which businesses can use to create business value. Traffic can be viewed across the entire network, down to the level of a single AP. Capacity and growth can be evaluated, as well as any irregularities that may arise, allowing for easier troubleshooting.
This kit consists of the CT10 toner/blinker, the CT15 tone probe, the CC2 carrying case, and one RJ45 jumper cord; it is specifically designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. This test system works with both active and inactive (dark) cables, and features a port ID function that blinks the link light to verify cable connectivity. This feature also provides a simple and effective method to identify a connected hub or switch port assignment on active networks. This kit also detects shorts by using a built-in continuity check. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning (a total of four audible tones) with two different tone frequencies and patterns is provided for non-active circuit tracing. The CT10 toner/blinker has a female RJ45 connector for easy network connection to connect with the included RJ45 patch cord. It has a unique capability of user-selectable blink rates for compatibility with the widest range of LAN equipment. Detachable alligator clips can connect to punchdown blocks or unterminated cables. Auto power down extends battery life, and a built-in low battery indicator warns when battery replacement is required. The CT15 tone probe is ergonomically designed, and incorporates volume control, non-conductive plastic tip, and complete compatibility with existing toners.
Save yourself the time and cost of an extra service call! This easy-to-use tester helps novice home network users determine cable faults before calling for service. The SOHOTest-E (Small Office Home Office) tester is an economic solution to test the most commonly used cables in residential wiring, those with f-type and RJ45 connectors.Use this handy tester to determine wiring faults in network, phone and cable TV cables before or after installation in cable installations up to 200 meters (656 feet). Has a compact, lightweight design with a small form factor of 2in x 3in x 1in. Uses a pass/fail coaxial test. Includes a remote unit for single person testing.
The high-tech LANsmart TDR Cable Tester detects, locates, and displays basic wire connection problems including opens, shorts, miswirings, reversals, split pairs and shield continuity for RJ45, Cat5, Cat6, UTP and STP. Plus, it measures cable length for UTP and STP cable without remotes by using TDR (Time Domain Reflectometer) technology in real time. LANsmart displays the results in a pin-to-pin format. LANsmart's built-in tone generator (probe not included) will also send signals to all or just selected pins or conductors to help find the corresponding cables; users can send out auto-negotiation signals to find the corresponding hub/switch ports. LANsmart is compact, ergonomic, and easy to operate. Its built-in PORTfinder locates corresponding jacks on hubs/switches, and it increases measuring accuracy with its Velocity of Propagation Adjustable Calibration ability for non-standard cables. Displays test results in pin-to-pin/wiremap format, and in both meters (m) and feet (ft). Battery operated, compact and easy to use. The advance functionality and versatility of the LANsmart make it an all-in-one tester suitable for all professional technicians and installers.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA