StarTech.com 24 Outlets Rack-Mountable Power Strip. Weight: 6.61 lbs (3 kg). Package width: 2.28"" (58 mm), Package depth: 73"" (1855 mm), Package height: 2.99"" (76 mm). Dimensions (WxDxH): 0.984 x 1.5 x 72"" (25 x 38 x 1830 mm)
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.Front and rear sets of equipment mounting rails adjust in 1/4"" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screwsTextured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.Maximum usable internal depth of 37 inches/94 cm (front to rear rail).Weight ratings of 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling.Front door is locking, reversible and removable.Secure cable channel, prevents other users from tampering with cablesRear doors are locking and reversible.Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24"" to match standard data center floor tiles.Casters are pre-installed and support a rolling load capacity of 2250 lbs (1020.6 kgs)s, allowing the enclosures to be pre-configured and rolled to the final installation location. Casters are removable.Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.Compact design allows the enclosure to roll through standard height commercial doorways.Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.Open bottom for cable access.Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) ComplianceCompatibility with airflow optimization accessories as well as cable management accessories.
- Attaches to desktop edge without tools, which allows platform to tilt or slide with ease - Extended knee clearance keeps you comfortable while typing and mousing - Attaches to desktops up to 1-3/4” thick without surface damage - Single lever easily adjusts tilt (flat to 30°) and slide (4-5/8” travel distance) - Rubber backing keeps mouse from sliding off mousing platform (IP pending) - Ultra soft memory foam wrist support with Microban® antimicrobial protection keeps product cleaner - Large platform holds both keyboard and mouse
Tripp Lite 5U Wall Mount Low Profile Secure Rack Enclosure Cabinet Vertical - 5U Rack Height x 19" Rack Width - Wall Mountable - Black - 150 lb Static/Stationary Weight Capacity - RoHS, TAA Compliance
Improve the organization and appearance of your rack in seconds, with a tool-less solid blanking panelThis 4U blanking panel helps improve the appearance and airflow of your EIA-310 compliant 19 in. server rack.Professional LookThis solid blank rack panel creates a clean and professional look by covering empty rack spaces and visible cables, for a more organized server room.Improve AirflowWhen used to cover unused rack units, this 4RU panel can help to control airflow and in certain applications, control internal temperatures by reducing the recirculation of hot air within the rack, created when unused spaces are left uncovered.RKPNL4U is backed by a 2-year StarTech.com warranty and free lifetime technical support.The StarTech.com Advantage- COMPATIBLE WITH 19"" WIDE RACKS: This 4U blank panel is designed to EIA-310 specifications and fits all 19"" standard network/server racks and cabinets; ships with hardware to mount this metal panel to your rack, installation is quick and easy- PROTECT YOUR EQUIPMENT: This solid blanking panel/spacer helps to protect valuable rackmount server equipment by creating space between installed devices, promoting airflow and passive cooling- TECHNICAL SPECIFICATIONS: Width: 19 inches
This SRXFAN3U SmartRack® panel-mount Triple Fan Accessory (for use with SmartRacks) is ideal for increasing the ventilation of SmartRacks, enclosures and server cabinets. The unit features three four-inch 208V-240V fans mounted in a 3U panel and includes mounting hardware.
Tripp Lite by Eaton SmartRack 16U Wall-Mount 2-Post Open Frame Rack Hinged Front Heavy Duty
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA