Showing 5220–5230 of 9428 results

Integrated joining hardware with multiple width enclosure alignmentEnclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout.Enclosure assemble-to-order (ATO) options capableThe Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself and does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides and doors. Check apc.com for enclosure size options and availability.Pre-installed full-enclosure height rear accessory channelsIntegrated and adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most.Low-profile castors and adjustable leveling feet from underneath or aboveEnclosures are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.Split rear doorsSplit rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.Special packaging options for shipping rack with equipment pre-rackedEnclosures with shock packaging are standard enclosures with provisions in the packaging design and enclosure assembly for shipping the enclosures with equipment mounted inside. Extensive industry experience with the leading IT manufacturers and most recently certified with Cisco® for pre-racking and shipping Cisco Unified Computing Systems (UCS). Check apc.com for enclosure size options and availability.Adjustable mounting rails with captive hardware and rapid alignmentThe vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment.CompatiblitySchneider Electric Rack Systems CompatibleCompatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.Optimized for high capacity cable management systemsNetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling.Integrated with InfraStruxure productsSchneider Electric cooling, power distribution, and cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system.Vendor-neutral EIA-310 19in Rack Mounting Compatibility GuaranteedVendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19"" equipment. The ""Fits Like a Glove"" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.ConvenienceQuick release doorsFront door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.Perforated front door with curved profilePerforated front and rear doors provide ample ventilation for servers and networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area and allowance of more perforation coverage and higher perforation rating.Cable access openings with pre-installed brushesLarge cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment.Simple SelectionNo need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.Easily removable cable access roofRoof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors.Enclosure adjustment tools and hardware providedAll enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.Equipment mounting rails integrate with patch cabling systemsEquipment mounting rails include zero U mounting holes beside the EIA 19"" mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV and Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, and rear enclosure zero U options are available for use with these enclosures.Eyebolt support integrated into enclosure frameIntegrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement and enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements and enclosure weight limits.Half-height side panels and option with brush strips for pass-throughHalf-height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes and brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow.SafetyIntegrated electrical groundingThe roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.Load CapacityA proven frame design, heavy-gauge mounting rails, and heavy-duty casters provide for a 3750 lb (1700 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor) load ratings (42U-52U). The 12U and 18U have a static and dynamic load capacity of 600 and 900 pounds (272/408kgs) respectively. Enclosures have been tested and approved to be combined with proper bolt down accessories to meet various seismic requirements. Check apc.com for product documentation for specific requirements

The new XPG VALOR AIR is a new breed of ATX chassis designed by XPG. Compatibility is the theme and capable of installing mid-to-high end of components. Its Streamline-Carving front panel design offers visual aesthetics when modding to ARGB gears, and to enhance airflow to be drawn in with 4 included 120mm fans.COMPACT DIMENSION with x4 120mm FANS PRE-INSTALLEDXPG VALOR AIR is a compact ATX mid-tower chassis with Streamline-Carving front panel design. Magnetic front panel and filter are both detachable, convenient for quick cleaning. 3mm-tempered glass side panel serves as a way to enjoy gazing through the tempered glass for looks.MAGNETIC FRONT PANEL DESIGNXPG VALOR AIR’s front panel is designed with Streamline-Carving pattern and utilizes steel material. Both front panel and dust filter are designed with magnetic and detachable for quick and convenient removal.ATX FORM FACTORXPG VALOR AIR supports Mini-ITX, Micro-ATX and ATX form-factor motherboards.EFFICIENT COOLING DESIGNXPG VALOR AIR sports a sleek, clean look with a streamlined design that enhances cool air from outside to be drawn in via x3 pre-installed 120mm fans at the front, and a 120mm fan at the rear to exhaust the heat.GRAPHIC CARD SUPPORTThe compact dimension does not compromise its fundamentals in hardware compatibility when installing or selecting graphic card. XPG VALOR AIR can install graphic card installation up to 305mm length with the fans installed at front.PSU INSTALLATION COMPATIBILITYWhile ideal for modern and compact PSUs from XPG, such as award-winning XPG CORE REACTOR and XPG CYBERCORE, respectively at 140mm and 160mm in length, VALOR AIR compact ATX chassis design still allows to easily slide in up to 180mm long PSUs, which translates to a lot of space still available for cable management. HDD/SSD cage is also removable, providing additional space that can reach up to 311mm.HDD/SSD STORAGEUsers can also install a HDD cage to add either two 3.5"" or a 2.5 plus a 3.5"" drive underneath the front side of the PSU shroud. The HDD cage is provided as an accessory when unboxing XPG VALOR AIR, as a flexible option for users to choose from when install storage. VERSATILE I/O PORTSXPG VALOR AIR offers an array of I/O ports such as two high-speed USB 3.2 Gen 1 and a 3.5mm audio/mic combo jack.

VENTO 120 Fan exhausts heat with 45.3 CFM air flow at mere 23 dBA noise level, whilst VENTO 120 ARGB adds further lighting effects, perfect for users to accessorize their gaming desktop.VENTO 120 Fan Series offers both functional and aesthetic heat-control management, efficiently and quietly with Rifle Bearing. The VENTO 120 ARGB further accessorizes PC desktops with lighting effects, capable of syncing most major motherboard brands.QUIETLY COOLVENTO 120 can operate 45.3 CFM fan air flow and steady 1,200 RPM fan speed, with anti-vibration rubber pads dampen the noise.RIFLE bearingThe XPG VENTO 120 and VENTO 120 ARGB are designed with Rifle Bearing, allowing the fans to perform quietly and smoothly.Rifle Bearing’s spiral groove ensures enough lubricant on the shaft, reducing noise and prolonging both the bearing and the fan’s lifespan.

VENTO 120 ARGBXPG VENTO 120 ARGB Fan is equipped with 9 LEDs, capable of light-syncing with most major motherboard brands, making it an ideal modding fan accessory.VENTO 120 Fan exhausts heat with 45.3 CFM air flow at mere 23 dBA noise level, whilst VENTO 120 ARGB adds further lighting effects, perfect for users to accessorize their gaming desktop.VENTO 120 Fan Series offers both functional and aesthetic heat-control management, efficiently and quietly with Rifle Bearing. The VENTO 120 ARGB further accessorizes PC desktops with lighting effects, capable of syncing most major motherboard brands.QUIETLY COOLVENTO 120 can operate 45.3 CFM fan air flow and steady 1,200 RPM fan speed, with anti-vibration rubber pads dampen the noise.RIFLE bearingThe XPG VENTO 120 and VENTO 120 ARGB are designed with Rifle Bearing, allowing the fans to perform quietly and smoothly.Rifle Bearing’s spiral groove ensures enough lubricant on the shaft, reducing noise and prolonging both the bearing and the fan’s lifespan.

XPG HURRICANE 140 ARGB PWM. Type: All-in-one liquid cooler, Fan diameter: 5.51"" (14 cm), Rotational speed (min): 700 RPM, Rotational speed (max): 1800 RPM, Noise level (high speed): 28.1 dB, Maximum airflow: 91 cfm, Maximum air pressure: 2.2 mmH2O, Bearing type: Fluid Dynamic Bearing (FDB). Voltage: 3.5 - 12.6 V. Width: 5.51"" (140 mm), Depth: 0.984"" (25 mm), Height: 5.51"" (140 mm). Product color: Black

Directs and Disperses Heat from SRCOOL3KTP Air Conditioning UnitThe SRCOOLTPDUCT SmartRack® Exhaust Duct Kit is a venting system accessory for the SRCOOL3KTP Rack-Mounted Air Conditioning Unit (sold separately). It directs and disperses heat from the SRCOOL3KTP through an upper vent into your facility’s dropped ceiling plenum, return air duct or other standard ventilation system. Reduces Your Cooling and Energy CostsBy keeping your rack equipment cool and performing at its peak, the retrofittable SRCOOLTPDUCT helps the SRCOOL3KTP reduce your cooling and energy costs. Ideal for small-space applications where heat is unlikely to disperse on its own, such as an edge micro data center, the SRCOOLTPDUCT installs using the included hardware on the air outlet side of the SRCOOL3KTP’s condenser.

Tripp Lite Portable AC Unit with Ionizer/Air Filter for Labs and Offices - 12,000 BTU (3.5 kW),120V. TAA Compliance