Showing 230–240 of 10770 results

Add a sturdy, 2U server rack shelf to any 2 post rackThe SHELF-2U-20-CENTER-V lets you add 2U 20 inches (50.8 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack. The shelf is vented to improve airflow and help lower temperatures in your rack.Quality constructionThe centered rack shelf can hold up to 200 lbs (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.Hardware includedConveniently includes M6 square cage nuts and M6 screws to set it up in no time.The SHELF-2U-20-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical supportThe StarTech.com Advantage

The SmartRack 42U Standard-Depth Rack Enclosure Cabinet protects sensitive electronic equipment from harsh conditions that would overwhelm a typical rack enclosure, including falling dirt, dust, drips and splashes. It is ideal for use in factories, construction areas, utility plants, warehouses and other areas high in moisture, dust and debris. It can protect your equipment from falling dirt, dust, drips, splashes and accidental contact with personnel.The front and rear doors have ventilating louvers instead of open mesh. They also have a sealing gasket around the door frames. On the front door there are built-in dust filters as well as fans. The filters are removable and they can be replaced with standard furnace filters - they're simple, inexpensive and effective. To compensate for the added air resistance of the filters, there are 12 large, high performance fans on the front door. The fans effectively create positive air pressure within the rack, mimicking the same type of environment one would find within a commercial clean room. Positive air pressure prevents dust from penetrating even the smallest cracks of the enclosure. The roof of the enclosure is sealed with a cap that keeps drips and falling dirt from getting inside the enclosure. Since the doors and top are sealed, cable access is provided through 6 cable ports - 2 in the roof, 2 below the rear door, and 2 in the unit floor. They allow cables to pass through, but they block the area around the cables maintaining  protection.The enclosure may be subjected to extreme vibrations and movements produced by vehicles and machinery. The heavy-duty steel frame supports up to 3000 lbs (1360.8 kgs). The large-diameter industrial casters also support up to 3000 lbs (1360.8 kgs), which means you can move the enclosure fully loaded. This is useful where you can install all your equipment in a clean environment, close the enclosure and wheel it to the dirty environment with all your equipment already protected.After the enclosure is in place, the levelers allow you to compensate for minor floor variations and make sure everything is stable. If you need to build a data center in the middle of your factory floor, you can do it with this enclosure. It's perfect for locations like factories, power stations, construction areas, shipping facilities, warehouses, processing plants, transport hubs and anywhere you need to protect equipment in a harsh working environment.

Add a sturdy, 2U server rack shelf to any 2 post rackThe SHELF-2U-14-CENTER-V lets you add 2U 14 inches (35.6 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack. The shelf is vented to improve airflow and help lower temperatures in your rack.Quality constructionThe centered rack shelf can hold up to 200 lbs (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.Hardware includedConveniently includes M6 square cage nuts and M6 screws to set it up in no time.The SHELF-2U-14-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical supportThe StarTech.com Advantage

Vertically wall-mount your server or networking equipment in this 8U network cabinetThis 8U vertical server cabinet offers a space-saving way to keep your network and server equipment secure. With its 30 in. depth, and a weight capacity of up to 200 lb. (90.7 kg), the server rack/cabinet is designed to fit your needs. It also features an additional 2U mounting bracket positioned toward the top of the enclosure, that you can use to mount patch cables or other shallow rack-mount equipment.Free up spaceWall-mount your equipment, even if you don’t have enough space for a full-sized rack or cabinet. This low-profile server cabinet is perfect for areas where space is at a premium, such as an office. The cabinet saves space by extending only minimally from the wall and housing the length of your equipment vertically. This reduces the horizontal footprint of your equipment while still providing plenty of room for your servers, patch panels, and switches.Keep your equipment cool and secureTo help keep your equipment secure, the vertical server cabinet/network rack features a sturdy metal design and a lock on both the door and access panel. It is also vented, providing passive cooling to help keep your equipment running at suitable temperatures.Easy, hassle-free installationThe server rack comes fully assembled and includes all of the necessary hardware to install equipment, making installation fast and easy. The mounting holes are spaced 16 in. apart, making it suitable for mounting on almost any wall, based on common North American wall-frame stud spacing.The RK830WALVS is backed by a StarTech.com 5-year warranty and free lifetime technical support.The StarTech.com Advantage- MOUNT YOUR SERVERS VERTICALLY: This 8U vertical wall mount server rack cabinet features a space saving low profile design & provides up to 30"" of mounting depth while only extending 15"" from the wall- INCLUDES AN EXTRA 2U OF MOUNTING SPACE: 2U of angled 2 post horizontal mounting space is provided above the vertical server mounting rails for switches, patch panels, and routers up to 4.7"" in depth- TECH SPECS: 8U 19"" Vertical Wallmount Enclosure

Add a sturdy, 22in depth fixed shelf into almost any server rack or cabinetThe CABSHELF22 2U 22in Depth Fixed Rack Mount Shelf lets you add a compact, 2U shelf to virtually any standard 19-inch server rack or cabinet with front mount options. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Our high-quality rack shelves are designed to withstand harsh work environments with ease. Constructed using SPCC commercial grade cold-rolled steel, this durable fixed rack shelf can hold up to 22kg (50lbs) of equipment - a perfect solution for storing small, non-rackmount equipment, tools, peripherals or accessories in your rack to keep them readily accessible.Backed by a StarTech.com Lifetime warranty.The StarTech.com Advantage

Vertically wall-mount your server or networking equipment in this 6U network cabinetThis 6U vertical server cabinet offers a space-saving way to keep your network and server equipment secure. With its 30 in. depth and a weight capacity of up to 200 lb. (90.7 kg), the server rack/cabinet is designed to fit your needs. It also features an additional 2U mounting bracket positioned toward the top of the enclosure, that you can use to mount patch cables or other shallow rack-mount equipment.Free up spaceWall-mount your equipment, even if you don’t have enough space for a full-sized rack or cabinet. This low-profile server cabinet is perfect for areas where space is at a premium, such as an office. The cabinet saves space by extending only minimally from the wall and housing the length of your equipment vertically. This reduces the horizontal footprint of your equipment while still providing plenty of room for your servers, patch panels, and switches.Keep your equipment cool and secureTo help keep your equipment secure, the vertical server cabinet/network rack features a sturdy metal design and a lock on both the door and access panel. It is also vented, providing passive cooling to help keep your equipment running at suitable temperatures.Easy, hassle-free installationThe server rack comes fully assembled and includes all of the necessary hardware to install equipment, making installation fast and easy. The mounting holes are spaced 16 in. apart, making it suitable for mounting on almost any wall, based on common North American wall-frame stud spacing.The RK630WALVS is backed by a StarTech.com 5-year warranty and free lifetime technical support.The StarTech.com Advantage- Total load capacity of 200 lb. (90.7 kg)- Save space by mounting your server vertically to the wall- Extra 2U of space for switches and patch cables

Eaton Tripp Lite Series 25U SmartRack Standard-Depth Half-Height Server Rack Enclosure, Doors and Side Panels 19" 25U

VERT. POLE/WALL MOUNT KIT FOR CATALYST 9124AX W/ TILT ADJUST