onnecting USB with the traditional RS-232 serial port, this adapter connects cellphones, PDAs, digital cameras, modems, or ISDN terminal adapters through your USB port. Has a data transfer rate of over 250 kbps. Since the adapter uses no IRQs, there are no IRQ conflicts, and it is ideal for when you need many serial devices attached to your PC. Use this adapter to connect directly to a serial device or to free your RS-232 port for other uses.
Add your RS-232 serial peripherals to a RS-232 device With DB9 cables from Cables To Go you will no longer sacrifice convenience when it comes to the placement of computer peripherals in your work area! Let us give you the flexibility to add an additional piece of hardware wherever you need it. Our DB9 cables can allow you to add your peripherals to a switchbox or replace the cables that restrict you. Each DB9 cable comes fully shielded to prevent against unwanted EMI/RFI interference, and its fully-molded design delivers excellent strain relief.
Add a Null Modem RS232 serial port to your laptop or desktop computer through USBThe ICUSB232FTN FTDI USB to Null Modem Serial Adapter Cable (1-Port) converts an available USB 1.1 or 2.0 port into an RS232 Null Modem serial DB9 port, solving DCE/DTE conflicts directly, without requiring additional cross-wired serial cables or adapters.This compact adapter features COM retention, allowing the same COM port value to automatically be re-assigned to the port if the cable is disconnected and re-connected to the host computer, or if the system is rebooted. The integrated FTDI chipset supports additional customization, advanced features, and compatibility not necessarily offered by other solutions.The USB to Null Modem adapter is compatible with a broad list of operating systems including Windows®, Windows CE, Mac OS and Linux, making it easier to integrate into mixed environments.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
Null modem cables and adapters connect two serial devices that require a null modem (cross-wired) configuration. This 6-ft. (1.83 m) cable has a DB9 female connector on each end. Superior molded cables with foil-shielding offer maximum EMI/RFI protection. Gold-plated connectors and contacts provide superior conductivity.
Cables To Go's line of Null Modem serial cables allows two DTE or DCE devices to communicate with no conflict in data transmission. The transmit and receive signals are crossed to ensure proper data transmission. Cables To Go's inexpensive, high-quality cables deliver the data for you quickly and reliably over short distances (less than 100 feet). Each of our Null Modem cables are designed with a rugged, overmolded construction that provides added strain relief and a solid connection each time. As always, the cables are foil shielded for protection from EMI/RFI interference caused by surrounding office equipment and flourescent lights. Available in a wide array of stock lengths and gender combinations, our offering also allows connections to DB9 (AT) or DB25 (PC) serial ports. Cables in male-to-female configurations are typically used as serial printer cables, while female-to-female versions are typically connecting two PC serial ports. Don't forget, custom lengths are our specialty.
Connects a Printer, Router or Other DTE Serial Device to Your Computer’s USB-A PortThis 30-inch USB to RS485 adapter cable turns your computer’s USB port into an RS422 or RS485 serial port and avoids the expense of upgrading your reliable serial devices. No external power source is needed. Just connect the cable to your computer and insert the included CD into your computer’s CD drive in order to launch the driver and assign the cable a COM port. It supports USB 2.0 specifications and data transfer speeds up to 230 Kbps, which is almost twice as fast as a built-in serial port. It is backward compatible with USB 1.1 devices. Note: The U209-30N-IND will pull power from the host device. If connected to a USB2.0 host, 0.5A of max power will be provided. If connecting to USB3.0 host, 0.9A of power will be provided. If your device is not working properly, be sure you are connecting to the proper USB port.COM Retention Feature for Convenient Reassigning of COM Values to PortsThe hot-swappable USB to RS422 adapter with built-in FTDI chipset offers COM retention. It automatically reassigns the same COM port values to each port, so when the cable is disconnected or the system is rebooted, no additional configuration is needed. The FTDI USB to serial adapter also supports RS485 auto-transceiver turn around with unique featured ATTA hardware, as well as remote wake-up and power management. A DB9-to-terminal-block adapter is included for making hardwire connections.Double Shielding Protects Your Data from Destructive Line NoiseFoil and braid shielding helps fight against electromagnetic interference and radio frequency interference (EMI/RFI) that impedes your signal and can distort or destroy data. The auto-sensing feature solves DCE/DTE conflicts without the need for cross-wired serial cables or adapters.3-Year WarrantyThe U209-30N-IND is backed by a 3-year warranty, ensuring reliability and performance.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA