Showing 200–210 of 371 results

This product is part of the ProtectNet range. It provides 24 outlets for data line surge suppressors. It requires 1U of rackspace. Its operating environment is 5 to 113 degrees F (15 to 45 degrees C). Its dimensions are 6 x 22 x 5 inches and 2.7 lbs. This is a great option for enterprise environments where a large amount of modular dataline protection is required.

APC P7T10 Essential SurgeArrest. Surge energy rating: 420 J, AC outlets quantity: 7 AC outlet(s), Nominal input voltage: 120 V. Product color: Beige, EMI/RFI noise filtering: 55 dB. Weight: 19.4 oz (550 g). Certification: CSA/UL 1449. Package width: 5.24" (133 mm), Package height: 14" (356 mm)

The majority of all surge-induced damage is caused by surges and spikes traveling along unprotected data lines. These surges originate from a wide variety of sources, including static charge buildup and lightning strikes. Left unprotected, your data lines expose network cards, A/V components, modems and other network equipment to damaging electrical transients. The Rack-mount ProtectNet family offers a modular approach to protecting a variety of data lines, including telephone lines, network lines, coax cables and more. Installing any combination of individual surge protection modules into either the four- or 24-position chassis and connecting them to earth ground will prevent back-door surges from ruining your productivity and costing you money.

Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

APC PER7T Personal SurgeArrest. Surge energy rating: 240 J, AC outlets quantity: 7 AC outlet(s), Nominal input voltage: 120 V. Product color: Beige, EMI/RFI noise filtering: 60 dB. Cable length: 70.9" (1.8 m), Weight: 28.9 oz (820 g). Certification: CSA/UL 497A/UL 1283/UL 1363/UL 1449. Package width: 7.24" (184 mm), Package height: 2.09" (53 mm)

Audible failure alarmCalls attention to a damaged surge supressor, identifying the need for service. Reduces the time protected equipment is at risk due to compromised surge suppression.Themal overload protectionPrevents thermal run-away when metal oxide varistors (MOVs) become damaged, or when a continuous overvoltage condition exists.Manual disconnect switchEnables the surge supressor to be de-energized for service without disconnecting the protected load.Surge counterRecords the number of power surges the unit is exposed to which can be used as an indicator that the unit is providing protection as intended. A high number of surges can be an indicator of poor facility power quality and the need for additional corrective actionsNEMA 3R/12 enclosureMeets the requirements of a NEMA 3R enclosure for outdoor applications, and a NEMA 12 enclosure for indoor applications.Alarm contactsEnables remote monitoring of TVSS alarm status.Replaceable individual phase modulesSignificantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.

Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.Noise FilteringSurge Protector attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.IEEE let-through rating and UL 1449 complianceThe 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".

Protection from electrical noise interference and damaging power transients. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment.Sequenced turn on/offHelps power on components in the proper order to prevent speaker stress. Proper sequencing can also help manage current draw on startup to prevent unnecessary circuit breaker tripping.LED status indicatorsQuickly understand unit and power status with visual indicators.Isolated filter banksEliminates electromagnetic and radio frequency interference (EMI/RFI) as a source of audio-video signal degradation.

This product is part of the ProtectNet family. Compatible with the APC PRM4 chassis rack, the 1-outlet surge suppressor has an input and output interface that works with most cabling standards, including Cat5, Cat5E and Cat6. It also supports Power over Ethernet (PoE) and network speeds up to 10GbE (10GigE) for greater compatibility. Its dimensions are 4.4 x 1.9 x 6.9 cm and 0.02 kg. The ProtectNet family of stand-alone surge suppressors protects individual data lines, including telephone and network lines, coax cables, and more.