Showing 100–110 of 275 results

- Perfect for portable mains and monitors - EVS15-SF woofer - 1.25-inch DH3/2010A titanium HF driver - Passive crossover - 90º x 50º coverage horn - High sensitivity, 132 dB maximum SPL - Power handling: 400 W continuous, 1600 W peak - Lightweight high-impact polypropylene enclosure - Wedge shape for monitors at 45º or 55º - Integrated pole mount adapter and pocket handle - Mounting via attachment plates or eyebolts - Black finish

The LHM 0606/xx is a general purpose, 6 W, cost-effective ceiling loudspeaker. The /00 version is screw mounted and the /10 version is clamp mounted into the ceiling. An optional fire dome LBC 3080/01 is available.- Suitable for speech and music reproduction- Flush-mounting in ceiling cavity- Easy to install- Simple power setting- Unobtrusive in virtually all interiors

- Versatile performance for mains, fills, or monitors- DVX3121A woofer with forced-air cooling- 2-inch ND2 titanium/neodymium HF driver- Passive crossover- Choice of 90º x 50º or 60º x 60º coverage horn- High sensitivity, 131 dB maximum SPL- Power handling: 600 W continuous, 2400 W peak- High-impact polypropylene enclosure- Compact monitor-friendly wedge shape- Up to four anchor-plate attachments- M8 mounting inserts (7)- Integrated handle

- Versatile performance for mains, fills, or monitors- DVX3121A woofer with forced-air cooling- 2-inch ND2 titanium/neodymium HF driver- Passive crossover- Choice of 90º x 50º or 60º x 60º coverage horn- High sensitivity, 131 dB maximum SPL- Power handling: 600 W continuous, 2400 W peak- High-impact polypropylene enclosure- Compact monitor-friendly wedge shape- Up to four anchor-plate attachments- M8 mounting inserts (7)- Integrated handle

The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25"" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1"" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75"" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide. The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum. The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw. The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket. The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.