Extreme performance for data centers.Kingston’s DCP1000 solid-state drive delivers up to 1.25 million IOPs from a single device, with ultra-low transactional latency and high throughput, making it ideal for data centers requiring extreme performance. It features ultra-fast NVMe PCIe Gen 3.0 x8, speeds of 7GB/s and hardware-based pFail. DCP1000 has flexible drive topology and supports flexible software RAID capability to save on redundant hardware costs. It supports 800GB to 3.2TB* from a single HHHL card and can be optimized for performance or redundancy, and a single card can be configured for RAID via the host software. It’s fast and economical to deploy, using native in-box NVMe drivers specifically built for PCIe-attached SSDs, and it’s plug-and-play with all major operating systems. It has UEFI boot support and low overhead architecture.In addition to its standard electrolytic capacitor pFail design, DCP1000’s enterprise-class features include next-gen ECC data protection and end-to-end data path protection.- Extreme performance for data centers- Flexible drive topology- Fast and economical to deploy- Enterprise-class SSD features*Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Memory Guide at kingston.com/flashguide.
Read-centric SSD with exceptional I/O and latency predictabilityKingston’s Data Centre 450R (DC450R) is a high-performance 6Gbps SATA SSD with 3D TLC NAND, designed for read-centric application workloads. This streamlined SSD delivers on performance while providing exceptional I/O and latency predictability, a requirement now amongst data-centre class SSDs. Built to Kingston’s strict QoS requirements, the DC450R is designed to ensure performance consistency over a wide range of read-intensive and read-caching workloadsEnterprise Data Centre SSDDelivering your business demands for 24/7 uptime and reliability. Kingston’s DC450R presents a specifically focused feature set that enables data centres to select the most cost effective SSD for their workload(s). Businesses require results in order to deliver on products, solutions and service level agreements (SLAs). Kingston’s DC450R is designed to deliver on these expectations.Read-centric SSDA strategically optimised SSD designed with a streamlined, focused feature set for read-centric applications. This enables data centres to select an SSD tailored for workloads without overspending on more expensive write-intensive SSDs. It delivers I/O speeds and response times (latency) to ensure high levels of performance in the working application and downstream at the user interface.ApplicationsIt is ideal for Content Delivery Networks (CDN), edge computing applications and a wide array of software-defined storage architectures. DC450R gives system builders and cloud providers a high-performance, low-cost SSD standard that they can count on. Capacities* from 480GB, 960GB, 1.92TB, 3.84TB, 7.68TB.- Content Delivery Networks (CDN)- Edge computing- Cloud service providers- High-speed databases- SQL server reporting services (SSRS)* Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. The cryptographic functions mentioned in the present section are implemented in the firmware of the product. The cryptographic functions of the firmware can be changed only during the manufacturing process and cannot be changed by a standard user. The product is designed for installation by the user in accordance with the step-by-step instructions in the installation user guide supplied with the product. It can therefore be used without further substantial support from the supplier.
Superior NVMe speeds, ultimate flexibilityKingston’s KC2500 NVMe PCIe SSD delivers powerful performance using the latest Gen 3.0 x 4 controller and 96-layer 3D TLC NAND. With read/write speeds of up to 3,500/2,900MB/s*, KC2500 delivers outstanding endurance and improves the workflow in desktop, workstation and high-performance computing (HPC) systems. The compact M.2 design gives greater flexibility, increasing storage but also saving space.Available in capacities from 250GB–2TB** to meet your system’s needs. KC2500 is a self-encrypting drive that supports end-to-end data protection using XTS-AES 256 bit hardware-based encryption and allows the use of independent software vendors with TCG Opal 2.0 security management solutions, such as Symantec™, McAfee™ and WinMagic®. KC2500 also has built-in Microsoft eDrive support, a security storage specification for use with BitLocker.- Incredible NVMe PCIe performance- Supports a full-security suite (TCG Opal 2.0, XTS-AES 256 bit, eDrive)- Ideal for desktops, workstations and high-performance computing (HPC) systems- Upgrade your PC with capacities of up to 2TB*** Based on “out-of-box performance” using a PCIe 3.0 motherboard. Speed may vary due to host hardware, software and usage. IOMETER random 4K read/write is based on an 8GB partition. ** Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products.
Efficient performance for thinner notebooks and systemsKingston’s NV1 NVMe™ PCIe SSD is a substantial storage solution that offers read/write speeds up to 2,100/1,700MB/s, which is 3 to 4 times faster than a SATA-based SSD, and 35 times faster than a traditional hard drive. NV1 works with lower power, lower heat, and quicker loading time. The efficient performance and single-sided M.2 2280 (22x80mm) design makes NV1 ideal for thin notebooks and systems with limited space.Available in capacities from 500GB – 2TB to give you all the space you need for applications, documents, photos, videos, and more.NVMe PCIe PerformanceOffers read/write speeds up to 2,100/1,700MB/sIdeal for systems with limited spaceEasily integrate into designs with M.2 connectors. Perfect for thin laptops and small form factor PCs.Multiple CapacitiesAvailable in a range of capacities up to 2TB to meet your data storage requirements.
DT Vault Privacy Encrypted USB Flash Drive FIPS 197 CertifiedKingston’s DataTraveler® Vault Privacy 3.0 USB Flash drive provides affordable business-grade security with 256-bit AES hardware-based encryption in XTS mode. It protects 100 per cent of stored data and enforces complex password protection with minimum characteristics to prevent unauthorised access. For additional peace of mind, the drive locks down and reformats after 10 intrusion attempts.Organisations can customise drives to meet internal corporate IT requirements. Co-logo, serial numbering, number of attempted password entries, minimum password length and customised product identifiers for integration into standard end-point management software (white-listing) are all available through customisation.SuperSpeed USB 3.0 technology means that users don’t have to compromise on transfer speeds for security. DTVP 3.0 is FIPS 197 certified and TAA compliant, to meet frequently requested corporate and government IT requirements.Ask an ExpertPlanning the right solution requires an understanding of your project’s security goals. Let Kingston’s experts guide you.Encrypted protectionAll your data is protected by hardware encryption, so no one can access your data without knowing the password.Complex Password SupportMaximize protection up to 16 characters with a mix of 3 out of the 4 character sets: uppercase, lowercase, numbers and/or special characters.Assist Data Security Compliance1Implement best practice policies and standards with encrypted data protection.CustomizableCustomize drives in a variety of ways, including serialization numbering, co-logo and customized product identifier for integration into standard end-point management software (white-listing), to meet internal corporate IT requirements.
Read-centric SSD with exceptional I/O and latency predictabilityKingston’s Data Centre 450R (DC450R) is a high-performance 6Gbps SATA SSD with 3D TLC NAND, designed for read-centric application workloads. This streamlined SSD delivers on performance while providing exceptional I/O and latency predictability, a requirement now amongst data-centre class SSDs. Built to Kingston’s strict QoS requirements, the DC450R is designed to ensure performance consistency over a wide range of read-intensive and read-caching workloadsEnterprise Data Centre SSDDelivering your business demands for 24/7 uptime and reliability. Kingston’s DC450R presents a specifically focused feature set that enables data centres to select the most cost effective SSD for their workload(s). Businesses require results in order to deliver on products, solutions and service level agreements (SLAs). Kingston’s DC450R is designed to deliver on these expectations.Read-centric SSDA strategically optimised SSD designed with a streamlined, focused feature set for read-centric applications. This enables data centres to select an SSD tailored for workloads without overspending on more expensive write-intensive SSDs. It delivers I/O speeds and response times (latency) to ensure high levels of performance in the working application and downstream at the user interface.ApplicationsIt is ideal for Content Delivery Networks (CDN), edge computing applications and a wide array of software-defined storage architectures. DC450R gives system builders and cloud providers a high-performance, low-cost SSD standard that they can count on. Capacities* from 480GB, 960GB, 1.92TB, 3.84TB, 7.68TB.- Content Delivery Networks (CDN)- Edge computing- Cloud service providers- High-speed databases- SQL server reporting services (SSRS)* Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. The cryptographic functions mentioned in the present section are implemented in the firmware of the product. The cryptographic functions of the firmware can be changed only during the manufacturing process and cannot be changed by a standard user. The product is designed for installation by the user in accordance with the step-by-step instructions in the installation user guide supplied with the product. It can therefore be used without further substantial support from the supplier.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA