Showing 1150–1160 of 9333 results

Epson Premium Semigloss Photo Paper. Opacity: 97%. Weight: 8.85 oz (251 g), Drying time printing media: 30 sec

- High-gloss, bright white, resin coated photo paper. - Print high quality photos for glass frames and photo albums. - Smudge and water-resistant quick dry surface. - Look and feel of traditional photographs. - Also available in professional wide format roll sizes. Premium Photo Paper Glossy has a high gloss finish that is perfect for printing your favorite cherished photos and enlargements for use with glass frames and photo albums. This paper is smudge and water-resistant with a smooth, bright white, resin coated stock.

HDMI Receiver Ideal for Medical EnvironmentsThe B127M-100-H pairs with B127M-004-H splitter or B127M-101-H extender kits (all sold separately) to receive 4K video for medical applications in hospitals, clinics, physicians’ offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. This receiver conforms to strict EMI/RFI and ESD requirements and can be used as a replacement receiver for B127M-101-H extender kit.Receives a 4K A/V Transmission from Up to 230 ft.The B127M-100-H receivers combine with the B127M-004-H four-port splitter to extend 4K signals from an HDMI source device to HDMI displays up to 230 feet away via user-supplied Cat6/6a cabling. Connect as many as four B127M-100-H receivers to the B127M-004-H to complete a long-distance multi-monitor installation.Receives Crystal-Clear 4K Video with Multi-Channel AudioThe HDCP 2.2-compliant B127M-100-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 36-bit Deep Color, 4:4:4 chroma subsampling and full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on 4K displays.Meets EMI/RFI and ESD Requirements Necessary for Use in Medical ApplicationsThis 4K receiver meets CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. It is approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.Built-In PoC Technology Provides Power to Avoid Bulky External Power BricksPower over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both this receiver and the connected transmitter or splitter will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the B127M-100-H where needed without worrying about finding a convenient AC outlet.Plug-and-Play Operation for Quick Setup and Immediate UseThe B127M-100-H works right out of the box with no software required. Mounting hardware is included for installing the receiver on a wall, pole or 19-inch rack. Connect up to four receivers to HDMI displays (HDTV, projector, monitor, etc.) with user-supplied HDMI cables (such as P569-XXX-CERT Series). Then, connect the splitter or transmitter to the source (Blu-ray player, cable box, laptop, media server, etc.) with a user-supplied HDMI cable. Finally, connect the splitter or transmitter to the B127M-100-H with user-supplied 26 AWG STP Cat6/6a patch cable (such as N262-Series).TAA-Compliant for GSA Schedule PurchasesThe B127M-100-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Display Wall Mount | Steel/Aluminum | For 32"" to 75"" TVsStrong and sleek, this full-motion TV wall mount lets you free up space by wall-mounting your 32"" to 75"" TV, and adjust it to the right viewing position with ease.Smooth Full-Motion AdjustabilityOnce it's installed, the flat-screen TV wall mount is simple to adjust without using tools. You can extend the arms with ease to position your TV anywhere from 4.1"" to 21.6"" (105 to 550 mm) away from the wall. The TV mount swivels +/-60 degrees and tilts +/-15 degrees for optimum viewing.Sleek DesignThis premium television wall mount beautifully combines form and function. Designed to provide an impressive appearance in every position, the premium black and silver design makes it ideal in a company lobby or hallway, information kiosk, or living space. With the arms extended, the protective covers provide a tidy, professional look. The cable-management channel inside the arms keeps cables neatly tucked away.Durable ConstructionEngineered with steel and aluminum, the robust TV mount securely supports a TV with a maximum weight capacity of 165 lb. (75 kg).FPWARPS is backed by a StarTech.com 5-year warranty and free lifetime technical support.The StarTech.com Advantage- LARGE 75"" TV WALL MOUNT: Heavy-duty full horizontal motion TV wall mount supports VESA compatible displays from 32 to 75 inch (165 lb/75 kg) w/ a durable full-motion steel frame & premium silver powder-coated finish- WIDE RANGE OF MOTION: Full motion TV wall mount offers +/-60° swivel, +/-15° tilting to find the ideal viewing angle; Articulating extendable arms reach out to 21.6"" (550mm) from the wall & fold in to 4.1"" (105mm) for a lower profile- COMPATIBILITY: Universal LCD/LED television mount supports LG, Samsung, Sony, Sharp, others (screws/spacers incl) & VESA bracket hole patterns 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x300, 600x400, 800x400, 800x500

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture HallsThis complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.Extends a 4K A/V Transmission up to 230 ft....and MoreThe B127A-1A1-BHBH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.Dip Switches Extend Your Choice of Either USB or IR.The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 ColorThe B127A-1A1-BHBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.Local HDMI Port on Transmitter Supports 4K @ 60 Hz ResolutionTo monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.Built-In PoC Technology Provides Power to Avoid Bulky External Power BricksPower over Cable (PoC) technology powers the transmitter or receiver over Cat6 cable. LEDs on both unit will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the unit where needed without worrying about finding a nearby AC outlet.Plug-and-Play Operation for Quick Setup and Immediate UseThe included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series).TAA-Compliant for GSA Schedule PurchasesThe B127A-1A1-BHBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

BRIO 305 Give employees a simple-to-use webcam for better collaboration. Certified for leading meeting platforms with USB-C connectivity. A VIDEO MEETING ESSENTIAL Brio 305 is a simple-to-use 1080p webcam built from the webcam market leader. Certified for leading meeting platforms, you can deploy Brio 305 with confidence to workstations and WFH employees. Made with a minimum of 48% recycled plastic. Made for business Brio 305 is compatible with most video conferencing platforms and is certified for use with Microsoft Teams, Zoom, and Google Meet. Unlock Better Meetings Simplify meetings with Brio 305, a USB-C webcam that helps everyone look and sound clear. Be seen clearly 1080p resolution provides a clear image and RightLight 2 auto light correction compensates for poor lighting conditions to create a natural meeting presence. Be heard clearly Mono noise-reducing mic captures voices clearly by suppressing background noises. Protects privacy Simply rotate to open or close the privacy shutter when not in use. An indicator light lets users know for certain when the camera is active. Webcam Software Security and simple management Logitech Sync MAXIMIZE PERFORMANCE. MINIMIZE DISRUPTIONS. Support your hybrid workforce, configure Logitech video collaboration devices in one place, and deploy the latest firmware and software updates with Logitech Sync. Monitor rooms, devices, and peripherals from anywhere and resolve problems before they impact a meeting. Logi Tune CUSTOMIZE THE EXPERIENCE Let employees take charge of their video meeting experience, wherever they are. Logi Tune helps them look and sound the way they want with on-screen webcam and headset settings. Plus, they can keep devices up to date and join meetings with just one click. Committed to Sustainability Brio 305 is consciously designed to reduce carbon impact. It includes a minimum 48% of post-consumer recycled plastic in an effort to support a more equitable and climate positive world — We chose to embrace the speckled appearance that comes from the variability of post-consumer recycled (PCR) plastics. SUSTAINABILITY AT LOGITECH Logitech is committed to creating a more sustainable world. We are actively working to minimize our environmental footprint and accelerate the pace of social change. Made With Recycled Plastic The plastic parts in Brio 305 include certified post consumer recycled plastic — 62% for Graphite, 48% for Off-white and Rose — to give a second life to end-of-life plastic from old consumers electronics and help reduce our carbon footprint. Responsible Packaging The paper packaging of the Brio 305 comes from FSC-certified forests and other controlled sources. By choosing this product, you are supporting responsible management of the world’s forests. CERTIFIED CARBON NEUTRAL Brio 305 is certified carbon neutral. This means the carbon impact of the product and packaging has been reduced to zero due to Logitech investment in carbon-offsetting and removal projects.

Enter Your ZoneLogitech Zone 900 gets you in your zone with premium audio for calls and music, active noise cancellation, and a noise-canceling mic. Use Logitech Unifying technology to connect up to six compatible peripherals with one receiver. So you can stay focused, stay connected, and stay in your zone—no matter where you work.SOUND CLEARA noise-canceling mic isolates your voice from the noise around you, so you sound natural and clear in calls and video meetings—even in a bustling workplace. Through Logi Tune, you can adjust the sidetone to hear your own voice, and ensure that you’re not speaking too loudly.HEAR PERFECTLYActive noise cancellation reduces the ambient sound around you, delivering clear, beautiful audio for calls and even music—so you can stay focused.14 HOURS OF FOCUSGet up to 14 hours of battery life on one full charge, so you can stay connected—even when calls go long, or your music-fueled head’s down time lasts a while. Charge wired via the USB-A to C cable, or go wireless with Qi charging. Enjoy another 1 hour of playback with just a 5-minute charge.MULTI-DEVICE WIRELESSUse Bluetooth or the Zone 900 Unifying + Audio receiver to connect to your computer, tablet, and smartphone. Seamlessly switch between them at will. The 30 m (100 ft) wireless range provides freedom to roam while staying connected.COMFORT MEETS STYLEZone 900 features a lightweight design for long-lasting comfort. Generously sized memory foam ear cups cushion the ears with soft leatherette, along with a cushioned headband. The soft ear cups and speckled, braided cable on both sides of the headband complete the professional look you need for video calls.SIMPLE, INTEGRATED CONTROLSSimple controls are right on the earcup. Just push a button to adjust volume, play and pause music, and start and end calls. Separate buttons give quick access to power, active noise cancellation, and Bluetooth pairing. Plus a flip-to-mute mic for instant privacy on calls.UNIFY YOUR SETUPUse the included Logitech Unifying + Audio receiver to pair up to six Logi wireless peripherals. No cables, no mess – just one USB port for a clean, wireless desk setup.ONE TUNE, MANY OPTIONSLogi Tune simplifies Zone 900 headset controls and customization from either a smartphone app or computer app. Adjust the 5-band EQ sliders to optimize your personal listening experience or choose one from the custom presets. Manage other functions such as mute, view charging status, and modulate sidetone controls from the intuitive dashboard. Stay up-to-date by downloading the latest firmware.

Black Box DVI-D Splitter with Audio and HDCP, 1 x 2 - Audio Line In - Audio Line Out - DVI In - DVI Out - RoHS, TAA Compliance