Showing 10–20 of 24 results

-Can act as a transmitter or repeater for Valcom wireless clock systemsTCP/IP network connectionFrequency tuning circuit to allow for time correction with changes in temperatureField-enabled Daylight Savings Time (when used as a primary master clock)Can act as an interface between existing systems to Valcom wireless systems915-928 MHz frequency-hopping technologyMicroprocessor basedCan transmit up to 2000 meters in open spaceLoaded, half wave antennaInput sensitivity: -103 dbmPower output:30 dbm (1 watt)Programmable relay outputInput for interfacing with other systems such as 59 minute correction, 58 minute correction, National Time and Rauland, Dukane, etcLED display for a clear, accurate readoutSelf testing mode allows the user to test the real time clock, output relay, LED segments, and inputsSimple interactive menu systemSlim design makes the wireless transceiver versatile for mountingEasy programming via two switchesAnalog and digital wireless clocks can be mixed on the same systemValcom digital input and outputLEDs for indication of transmission or receipt of Valcom digital signal (from the V-DCPI Digital Clock Protocol interface)85-265 VAC input voltage making it accessible for American or European useTransmits wireless signal every minuteCompact design makes the V-WMCA ideal for mounting is hallwaysFCC approved, part 15 Section 15,247Made in the USA

-Digital clock head endCombination of the V-DCPI and V-VCU pre mounted and connected on a convenient 2u 19"" rack or wall mount shelfFacilitates 2-wire digital clock correction to the Class Connection ES, Valcom MultiPath, VC-24 or V-2924A systemsConvenient pre-mounted 2u 19"" rack shelf assemblyThe V-DCH Digital Clock Head End incorporates a V-VCU 6 Amp 2-wire Clock Driver and a V-DCPI Digital Clock Protocol Interface in a convenient 2u 19"" shelf assemblyThe unit provides a complete interface between the DB15 clock output of either of the V-SER, VC-2927 or V-2927 Clock Cards

- 70 Volt expander- Expands a 25/70/100 Volt system without straining the existing amplifier- Easily connects to the amplifier output or anywhere on the 25/70/100 Volt line- No costly amplifiers or heavy gauge cablerequired- Endless expansion using Valcom speakers/horns- Output Impedance: 8 ohm- Weight: 1.1lbs- Dimensions: 4.44""H x 2.75""W x 2.88""D- VALCOM POWER UNITS (0)- VCV1095

Valcom 6 Channel Amplifier 6 Independent channels of amplification 4 10W Outputs 2 40W Outputs Quick release screw terminals Activity LED indicators High pass horn filter on 40W Outputs Independent volume controls for each channel Power indicator Transformer coupled inputs

- Lightweight T-bar- Optional for use with Lay-In Ceiling Speakers

- Valcom 6 digit, 4 inch double sided digital PoE clock- Easy to install via RJ45 connection- Power over Ethernet (IEEE 802.3af)- No master clock required set automatically by NTP (Network Time Protocol)- 10/100BaseT Ethernet compatible- DHCP or static IP addressable- Industrial grade metal housing

- Designed to convert the hands-free talkback audio outputs of V-TCM station cards to the appropriate level and impedance necessary for the input of one-way amplifiers and/or Valcom One-Way Self Amplified Speakers or Horns- Input 1000 Ohms- Output less than 20 Ohms

- Use with SIP (Session Initiation Protocol) VoIP PBXU- Use with Valcom multi-zone page control unit with Centrex or C.O. lines (DTMF signaling only)- Use with Valcom handsfree page units for talkback paging- Multiple units may be connected for multi-zone paging with all call behind a PABX- Background music, stereo or mono input; music mutes during page- Volume controls for background music and tones- Security code option to restrict page access- Store & Play feedback eliminator option- Multiple disconnect options- Page verification tone- Customizable Page alert tone- Drive up to 150 one-way amplified speakers on 8 Ohm output (one-way output)- Web interface for programming extended functions

- Eliminates busy signals on heavily used paging systems and also prevents acoustic feedback- Multiple messages can be recorded simultaneously- Add input ports in increments of 2 by adding additional units- Connect up to 4 units together to provide 8 ports-- Enables up to 8 simultaneous pages, stores, and plays back in sequence- Automatic consistent volume level even when recording voices vary-- low to high- Stacks messages-- records a page while playing a recorded page- Eliminate feedback to all zones with only one unit- High-fidelity-- sounds like a natural voice not like a recording- Solid state design-- no moving parts to break- LED indicators for play, record, busy, power- Dipswitch programmable features Pre-announce alert tone Priority override (real time or delayed) DTMF message cancel- Real time background music with volume control- Two audio outputs: 8 or 600 ohms loop- Screw terminal connections- Access by loop start trunk port, C.O. port, page port, or zone output of Valcom page control- Emergency messages can interrupt play back sequence (interrupted message will play in full once emergency message has completed)- Wall and rack mounting hardware included

- 6 Zone talk back analog page control- Provides tandem all call- Background music input, automatically mutes inzone being paged- Page override for special priority announcements- Features are programmable per zone- Built-in tone generator for night ringing, time clock tone, doorbell- Accepts pulse and tone dial- Supports up to 2 talk back speakers and 40 one-way speakers per zone- Battery back-up input - UL listed- Access: page port on selected telephone systems, PBX loop start or ground-start trunk port, electronic or 1A2 line key (line card required), or dedicated single line phone set- Input impedance: 600 ohm- Music source impedance: 4 to 600 ohm- Music input level: -10dBm nominal- DC output: -24 Vdc @ 500 mA- Power requirements: 230 Vac/.5A or 120 Vac/1A- Weight: 10lbs- Dimensions: 10.25""H x 13""W x 2.63""D- VALCOM POWER UNITS (+30)