Showing 170–180 of 275 results

The P024-006-GY-HG Hospital-Grade Power Extension Cord features a NEMA 5-15P HG plug on one end and a NEMA 5-15R HG receptacle on the other, allowing you to extend the length of your existing hospital-grade power cord by six feet. This cord is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 42 standards, ensuring it’s a safe, reliable power solution for hospital environments. This six-foot 125V/15A cord features 14 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.

The P022-015-GY-HG Hospital-Grade Power Extension Cord features a NEMA 5-15P HG plug on one end and a NEMA 5-15R HG receptacle on the other, allowing you to extend the length of your existing hospital-grade power cord by 15 feet. This cord is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 42 standards, ensuring it’s a safe, reliable power solution for hospital environments. This 15-foot 125V/13A cord features 16 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.

Tripp Lite's Heavy Duty C19 to L6-20P 4.27 m (14-ft.) power cord is constructed with 3 x 12AWG copper conductors, fully molded ends, and 250V/20A rating.- C19 to L6-20P power cord, 4.27 m (14-ft.)- Molded, Heavy-Duty Power Cord, 4.27 m (14-ft.)- IEC-320-C19 to NEMA L6-20P - 12AWG, SJT, 20A, 250V- RoHS compliant

Tripp Lite's Piggyback Power Cord allows you to connect two pieces of equipment to a single electrical outlet. The combination 5-15P / 5-15R connector allows a second 5-15P power cord to be attached, doubling your electrical outlet capacity. Use the P006-006-515MF with your PC and plug your monitor into the piggyback port...only one outlet required for both pieces of equipment! 1.83 m (6-ft.) cable with IEC-320-C13 at the other end. Heavy-duty 16AWG, 13AMP conductors.- Share one electrical outlet by piggybacking cables- 1.83 m (6-ft.), 5-15P to C13 with 5-15R pass-through port- 16AWG, 13AMP, 125V- UL Listed- 1.83 m (6-ft.), 5-15P / 5-15R to C13 Piggyback Power Cord - Heavy-duty 16AWG, 13AMP conductors handle extra current draw- Molded ends for a lifetime of trouble free use

120V single phase whip with L5-20R outlet distributes power from 3 phase distribution cabinet to critical equipment racks. 10 ft. insulated and 3 ft. of removed outer jacket cabling supports hardwire connection to SUBB120 circuit breaker in SUDC208V42P 3 phase distribution rack. L5-20R outlet is compatible with 120V loads and Power Distribution Units (PDUs) supporting a L5-20P plug-in connection.

C14-to-C13 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis IEC-320-C14 to IEC-320-C13 cable features 14 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This C14 male to C13 female cord can be used to connect a computer, server, monitor or drive to a UPS system or PDU or replace or upgrade the standard power cord provided by the device's manufacturer. The 6-ft. (1.83 m) length allows you flexibility in placing equipment with respect to the power outlet.Color-Coded Connectors Avoid Misidentification That Can Cause Costly DowntimeThis computer power extension cord features fully molded yellow ends. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.

Heavy-Duty Extension Cable for Network Devices That Require a Heavy-Gauge ConnectionThis heavy-duty extension cord features 16 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This cord can be used to connect a server, router, network switch or blade server enclosure to a PDU or replace or upgrade the standard power cord provided by the device's manufacturer. The 10-ft. (3.05 m) length allows you great flexibility in placing equipment with respect to the power outlet.

Tripp Lite C20 to C19 Power Cable - Locking C19 Connector, Heavy Duty, 20A, 100-250V, 12 AWG, 3.05 m, Black. Cable length: 118.1"" (3 m), Connector 1: IEC C20, Connector 2: IEC C19. Input voltage: 100 - 250 V

Hospital-Grade Power Cable is a Safe Solution for Medical FacilitiesThis hospital-grade IEC power cord is designed for computers, mobile carts, printers, scanners, monitors and other compatible equipment with a three-pin C14 inlet in a hospital or other medical facility. It features a locking C13 end for connecting to a device and a NEMA 5-15P-HG plug for connecting to a hospital-grade AC power source located outside patient-care vicinities. The three-foot length allows you flexibility in placing equipment with respect to the power outlet.Locking C13 Connector Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a cable come loose accidentally can mean the loss of power and costly downtime. The locking C13 connector helps you avoid such danger, protecting critical equipment by maintaining a secure link without failure. The locking cable is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the power cord always stays connected.Lifetime WarrantyThe P006-L03-HG10 is backed by a lifetime warranty, ensuring reliability and performance.- Connects a PC, printer, monitor, scanner or other hospital equipment with a C14 inlet to a grounded hospital-grade AC outlet- Recommended for connecting devices to power outlets outside patient care vicinities- 3 ft. length allows flexibility in placing devices, while avoiding cable clutter- Hospital-grade power cable replaces or upgrades power cord provided by manufacturer- NEMA 5-15P-HG plug connects to AC power; C13 plug connects to device’s C14 inlet- Locking C13 connector maintains secure link to avoid loss of power and costly downtime

NEMA 5-15P to C13 power cable ensures a secure connection for all your equipment. Locking C13 connector prevents accidental disconnection. - Recommended for connecting power to computers, servers and other peripherals- Adds 1 ft. to your existing power connection to provide more flexibility in placing devices- NEMA 5-15P to C13 cord is ideal replacement for worn-out or missing cable- Locking C13 connector maintains secure link to avoid loss of power and costly downtime- This product is covered by a Lifetime Limited Warranty NEMA 5-15P to C13 Power Cable Connects Computers, Printers, Servers and Other EquipmentThis NEMA 5-15P to C13 power cable is designed for applications that do not require a heavy-duty cable. This UL-listed 5-15P to C13 power cord can be used to power a computer, printer or monitor or attach a server or drive to a UPS system or PDU.Locking C13 Connector Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a cable come loose accidentally can mean the loss of power and costly downtime. The P006-L01’s locking C13 connector protects your critical equipment by maintaining a secure link without failure. The locking cable is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the power cord always stays connected.Lifetime Limited WarrantyThe P006-L01 is backed by a lifetime limited warranty, ensuring reliability and performance.Typical Applications- Connect devices like computers, servers and monitors to a PDU up to 1 ft. away- Prevent accidental disconnection with the C13 locking connector- Provide a high-quality replacement for a worn-out or missing power cordPackage IncludesP006-L01 NEMA 5-15P to C13 Computer Power Cord, Locking C13 Connector - 10A, 125V, 18 AWG, 1 ft.