Showing 120–130 of 232 results

Tripp Lite N48LSS-16X16 Spine-Leaf MPO Panel, 16 x 16 Ports, 1U - 32 Port(s) - 1U High - Black - 19" Wide - Rack-mountable - TAA Compliance

Tripp Lite N48LSS-32X32 Spine-Leaf MPO Panel, 32 x 32 Ports, 1U - 64 Port(s) - 1U High - Black - 19" Wide - Rack-mountable - TAA Compliance

The N492-06D-SC High-Density Fiber Adapter Panel (MMF/SMF) is designed specifically for use with N492-WM2-BK or N492-WM4-BK Wall-Mount Fiber Enclosures. The pass-through panel features six SC duplex connectors that work with both multimode and singlemode applications. It’s easy to install—just snap the panel into the enclosure with no tools required. It’s made from heavy-duty 1.2 mm cold-rolled steel that will last a lifetime. Dust caps are included to protect unused connectors from debris or damage.

The N492-08D-LC High-Density Fiber Adapter Panel (MMF/SMF) is designed specifically for use with N492-WM2-BK or N492-WM4-BK Wall-Mount Fiber Enclosures. The pass-through panel features eight LC duplex connectors that work with both multimode and singlemode applications. It’s easy to install—just snap the panel into the enclosure with no tools required. It’s made from heavy-duty 1.2 mm cold-rolled steel that will last a lifetime. Dust caps are included to protect unused connectors from debris or damage.

The N492-WM4-BK Wall-Mount Fiber Optic Distribution Enclosure manages and protects your fiber terminations where space is at a premium. It locks using the included key to keep your connections safe from tampering. The doors open wide to reveal plenty of room for splicing and patching your fiber cabling. It supports up to four fiber adapter panels, such as high-density LC (N492-08D-LC), SC (N492-06D-SC) and ST (N492-08S-ST) panels. Cable manager rings, cable ties and a labeling sticker help you keep your cables neatly organized inside the fully sealed enclosure. Made from heavy-duty cold-rolled steel, the N492-WM4-BK mounts on any solid surface.

Tripp Lite Fiber Optic 10/100BaseT to 100BaseFX-SC Multimode Media Converter 2km 1310nm - 1 x RJ-45 , 1 x SC Duplex - 10/100Base-TX, 100Base-FX

Tripp Lite's N784-001-SC-15, 10/100 to Singlemode Media Converter ( RJ45 to SC ), is an economical way to extend the distance ( up to 15kM ) of network nodes by converting Cat5e UTP cables to Singlemode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.- Extends a 100Mb Ethernet signal up to 15kM over Singlemode Fiber Optic Cable- Auto detects Full/Half Duplex Transfer Mode- 10/100 UTP to Singlemode Fiber converter- Up to 15kM ( 9 mile ) range- Auto Negotiation MDI / MDI-X - 6 performance monitoring LEDs - 1310nm wavelength- Small, compact design

Tripp Lite's N785-001-SC 10/100/1000 Gigabit Media Converter is an economical way to extend the distance ( up to 2Km ) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. With advanced features such as selectable half or full duplex operation on the fiber port, 1310 nm wavelength, automatic MDI/MDI-X configuration and link fault pass-through, the N785-001-SC supplies superior signal quality and gives you ultimate network control. For extra flexibility, the converter can be powered either by an AC adapter or USB port. The N785-001-SC is compatible with both 62.5/125 and 50/125 multimode fiber cable.- Connect 10BaseT/100BaseT /1,000BaseT UTP Ethernet to 1000BaseFX Fiber Ethernet- Auto MDI/MDI-X- UTP port auto-senses network speed- Fiber lengths up to 2Km- 6 LED Function lights- Uses 62.5/125 or 50/125 Multimode cable- 3.75""L x 2.75""W x 1""H- Wavelength: 1310nm- RoHS Compliant

Customize a Network Extension over Fiber Optic CableThis network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.Monitor Your Installation with Link Fault Signaling and Loop Back FunctionsDetermine the health of your network connection via the Link Fault Signaling (LFS) and Line Loop Back (LLB) functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The LLB diagnostic test ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.LEDs Indicate Installation Performance and Diagnostic FunctionsEasy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20–57VDC terminal block provides primary and secondary power inputs.Protective Metal Housing Built to Withstand a Variety of HazardsThe IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting.TAA-Compliant for GSA Schedule PurchasesThe N785-I01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Extends a Gigabit Ethernet Signal up to 550 m (1804 ft.) Using SC Multimode CableConverts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speedFiber optic technology more effective than Cat5e/6 over long distancesSupports 50/125 multimode fiber optic cabling up to 550 mSupports 62.5/125 multimode fiber optic cabling up to 400 mConnection requires an N785-INT-SC-MM at both endsAdvanced Monitoring and ControlSupports automatic sensing of network speedSupports both full-duplex and half-duplex operationSupports automatic MDI/MDI-X configuration6 LEDs indicate network and fiber link status at a glancePlug-and-Play OperationNo additional software or drivers requiredCompact unit sets up in minutesDurable metal housing designed to lastPower supply includes international plug adapters for North America, U.K., Europe and Australia