Showing 110–120 of 138 results

Multimode duplex fiber optic ST/LC Ethernet cable is manufactured from 62.5/125 zipcord fiber. The cable has LC to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.

25 Meter LC/LC 50/125 10Gb Aqua Fiber Patch Cable, OM3 Rated10gb Ethernet speed to 300 meters @850nmUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

LC to SC/APC (Angle Physical Contact), 3 Meter Fiber Patch cableManufactured from 9/125 duplex (zipcord) fiberPVC jacketLength: 1-meter. Connectors: 2 SC (Green ) and 2 LC connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Fiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

Fast, Clear Data Transmission Through Your LANTwice the bandwidth throughput of multimode cableIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassSturdy LC and SC male connectors meet stringent insertion loss standardsBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemode

2M ( 6-ft ) LC/LC, OM3 ratedPush/Pull tab connectors offer maximum accessibility in high density installations; install / remove with one hand without needing additional toolsSlim uniboot design saves space and makes cables easier to managePremium-grade ceramic ferrule designed specifically for 10GbE and faster applicationsSturdy plastic housing for long-lasting durability10GbE speed to 300 meters @850nmUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

5M ( 16-ft ) LC/LC, OM3 ratedPush/Pull tab connectors offer maximum accessibility in high density installations; install / remove with one hand without needing additional toolsSlim uniboot design saves space and makes cables easier to managePremium-grade ceramic ferrule designed specifically for 10GbE and faster applicationsSturdy plastic housing for long-lasting durability10GbE speed to 300 meters @850nmUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant

MTP / MPO Push-Pull Connectors for Quick Fiber Optic connectionsPush/Pull tab connectors offer maximum accessibility in high density installations; install / remove with one hand24 times the density of SC style connectorsNo need for long fan-out cables or individual long duplex cable runsHigh-density design cuts down on installation costs50/125 OM3 Rated Multimode Fiber, 850nmPlenum rated jacketUnique cable ID label for Quality Control and TraceabilityEach cable 100% tested for low insertion loss and back reflectionTest data supplied with each cableCustom lengths available

The N842-05M-12-MF MTP/MPO Multimode Ethernet cable is a 5-meter Ethernet cable that supports 40 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers. With one male and one female MTP/MPO connector, this OM3-rated multimode fiber optic cable allows IT professionals to extend the length of their connection and eliminates the need for long fan-out cables or individual long duplex cable runs. MTP / MPO Extension cables used with high-density patching systems, in particular MTP/MPO Feed-Through Cassettes, such as N484-12M12.The 12-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up circuit card and rack space for other cables. The cable has documented insertion loss and back reflection testing on every connector and attenuation loss that meets or exceeds current standards. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand.Backward compatible with existing 50/125 fiber, the aqua-colored N842-05M-12-MF has 50/125 duplex (zipcord) fiber made from glass, as well as a plenum-rated jacket for connecting high-speed network components in ceilings, walls and ducts. The laser-optimized multimode fiber (LOMMF) cable meets the most current industry standards, including IEEE 802.3ae and TIA LOMMF.

The N842-10M-12-MF MTP/MPO Multimode Ethernet cable is a 10-meter Ethernet cable that supports 40 Gb Ethernet speeds and is designed for high-density connections between network equipment in telecommunication rooms and data centers. With one male and one female MTP/MPO connector, this OM3-rated multimode fiber optic cable allows IT professionals to extend the length of their connection and eliminates the need for long fan-out cables or individual long duplex cable runs. MTP / MPO Extension cables used with high-density patching systems, in particular MTP/MPO Feed-Through Cassettes, such as N484-12M12.The 12-fiber MTP/MPO connectors are about the same size as SC connectors, but are 12 times denser, freeing up circuit card and rack space for other cables. The cable has documented insertion loss and back reflection testing on every connector and attenuation loss that meets or exceeds current standards. Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand.Backward compatible with existing 50/125 fiber, the aqua-colored N842-10M-12-MF has 50/125 duplex (zipcord) fiber made from glass, as well as a plenum-rated jacket for connecting high-speed network components in ceilings, walls and ducts. The laser-optimized multimode fiber (LOMMF) cable meets the most current industry standards, including IEEE 802.3ae and TIA LOMMF.

Connect Network Equipment at Speeds Up to 100 GbpsCombines four 28 Gbps SFP channels into single high-density cableIdeal for data centers, high-end servers and enterprise wiring closetsMulti-platform support for 128G Fibre Channel and EDR InfiniBandLower port cost and power budget when compared to fiber opticsTop-of-the-Line Construction100 GbE 38-position “board-as-connector” designZinc die-cast male QSFP+ connectors for superior EMI resistanceErgonomic pull-tab ejectors for quick, easy connections8-pair wire technology optimized for bandwidth-intense applicationsFlexible 26 AWG conductors maintain smooth high-frequency responseFully Compliant and CompatibleMeets or exceeds strict 100-Gigabit Ethernet (100GBASE-CR4) standardsComplies with IEEE 802.3bj and RoHSComplies with latest QSFP28 MSA (Multi-Source Agreement) SFF-8665 architectureCompatible with all QSFP and QSRP+ portsCompatible to Cisco QSFP-100G-CU1M