Showing 0–10 of 18 results

RJ45 Port Lock Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a patch cable come loose accidentally can mean the loss of a network signal or a security breach that could lead to costly downtime. The N2LOCK-010-YW helps you avoid interruptions in your Gigabit Ethernet network or digital signage system by maintaining a secure link without failure. A locking RJ45 connection is also invaluable when moving equipment within a rack or removing equipment from tight areas, ensuring the cable always stays connected. This package includes 10 yellow RJ45 plug locks.Easy to Install or Remove in Just a Few SecondsThis RJ45 lock secures a plug to most types of RJ45 jacks in a patch panel, wall plate or switch to prevent unauthorized removal of a patch cord or other compatible network equipment. Just remove the plastic latch on top of the plug using a cutting tool, slide the N2LOCK-010-YW onto the plug, and insert the newly affixed connector into the desired RJ45 jack. You’ll hear a click to confirm the connector has locked into place. To remove the cable, use the N2LOCK-KEY-RD security key (sold separately).Color-Coded to Avoid Misidentification That Can Lead to a Costly Dropped SignalYellow color-coding allows easy, fast identification in a crowded rack or patch panel and helps prevent the cable from becoming inadvertently removed. The lock’s compact design doesn’t interfere with adjacent RJ45 jacks, even in high-density applications.

PLC13BL BLUE color plug-lock inserts prevent accidental disconnection of C14 plug-in power cords from C13 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C14 input cord and connect it to any C13 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance.Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC13BL plug-lock inserts ship in packages of 100.

RJ45 Locking Insert Helps Prevent Accidental or Unwanted Cable ConnectionsThe N2LPLUG-010-YW lets you maintain strict control over your patch panel, wall plate or network switch’s RJ45 ports. The insert locks into an RJ45 port, preventing those without proper access from connecting cables. Not only does this protect data and deter tampering, but it also helps prevent a network connection from weakening due to too many ports in service. This package includes 10 yellow RJ45 locking inserts.Easy to Install or Remove in Just a Few SecondsThis RJ45 insert secures a lock to most types of RJ45 jacks in a patch panel, wall plate or switch to prevent unauthorized connection of a patch cord or other compatible network equipment. Just connect the N2LPLUG-010-YW to the panel or switch’s RJ45 port for a secure lock. You’ll hear a click to confirm the insert has locked into place. To remove the insert, use the N2LOCK-KEY-RD security key (sold separately).Color-Coded to Avoid Misidentification That Can Lead to a Costly Dropped SignalYellow color-coding allows easy, fast identification in a crowded rack or patch panel and helps prevent the insert from becoming inadvertently removed. The insert’s compact design doesn’t interfere with adjacent RJ45 jacks, even in high-density applications.

Key for Universal RJ45 Plug Lock and Locking Insert Allows for Easy and Quick UseThe N2LOCK-KEY-RD provides an easy way to unlock a connection between N2LOCK-010-YW RJ45 plug lock or N2LPLUG-010-YW RJ45 locking insert and an RJ45 port. Just insert the key into either the plug lock or locking insert for instant disconnection in seconds with no damage to the port’s patch panel, wall plate or network switch. This package includes two keys.

The SEC6K Keyed Laptop Security Lock helps prevent thieves from walking off with your valuable computer when your back is turned. Quick, easy security for laptops and docking stations with a built-in security slot, the 6-ft. (1.83 m) cable attaches tightly to a table, desk or other fixed structure. Coated with protective PVC to deter theft, the cable resists cuts and tampering. The top-security lock is engineered using nickel-plated zinc alloy and connects to your device's security slot. Two keys are included to ensure you always have a spare. Essential for the office, classroom or anywhere else you need to maintain the utmost safety of your private information.

PLC19BK BLACK color plug-lock inserts prevent accidental disconnection of C20 plug-in power cords from C19 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C20 input cord and connect it to any C19 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance. Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC19BK plug-lock inserts ship in packages of 100.

Secure USB Port Blockers Protect Your Data Against Unauthorized AccessThese port blockers are an easy way to prevent unapproved personnel from connecting an unwanted flash drive or other USB peripheral to a USB-A port. Use the included security key to insert a blocker into the USB port and lock it into place. This will prevent any USB peripheral from infecting the device with malware or removing classified data. The key also removes the blocker just as easily and quickly as it installs the blocker. Four blockers are included, three of which conveniently store inside a compartment on the key. The key and blockers can only be used together for maximum security.

Receive an Immediate Alert in Case of Water Leak in Your Data Center or Wiring ClosetThe E2SLD mounts near cooling units and other IT equipment in your server room to detect water leakage or leakage of any electrically conductive fluid. It supports a Normally Open contact closure connection. When liquid comes in contact with both sensor contacts, an alert notification is sent to you via web, SNMP, telnet or SSH management interfaces.Easy to Mount on a Raised FloorThe sensor is constructed from fire-retardant ABS plastic. Mount the sensor to a wood, metal or concrete surface about three millimeters above the raised floor surface. Use the included mounting screws, double-sided tape or a user-supplied adhesive. A screw terminal cover is included to protect the wire terminals from damage or interference.Required Accessories: WEBCARDLX or LX Platform and E2MTHDIThe E2SLD must be used with a compatible UPS system or PDU equipped with the WEBCARDLX or LX Platform interface, along with an E2MTHDI EnviroSense2 (E2) Environmental Sensor Module with polarity markings (sold separately). The E2MTHDI supports E2SLD and one additional contact closure sensor.TAA-Compliant for GSA Schedule PurchasesThe E2SLD is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.5-Year Warranty and Environmentally Responsible DesignThe E2SLD comes with a 5-year warranty. It’s manufactured in compliance with strict RoHS specifications.

Secures Your Computer in Office, Classroom and Other High-Traffic LocationsCompatible with security slots in almost all laptops and docking stations Theft-deterrent 4-ft. (1.22 m) cable resists cuts and tamperingTop-security lock built using nickel-plated zinc alloyAttaches firmly to table, desk or other fixed structureCable coated in protective PVCIncludes 2 keys

The SRDVRLB 5U Security DVR Lockbox Enclosure is an all-in-one solution for securely storing and cooling your security digital video recorder (DVR) to protect it from damage, tampering or theft. It’s ideal for network closets, retail outlets, warehouses, offices, classrooms and other locations where you need a DVR to be securely protected from unauthorized access. Constructed from heavy-duty steel in a durable black powder-coat finish, the SRDVRLB has a maximum load capacity of 27 kgs.To ensure your valuable DVR data stays safe and secure, the front door locks with the included keys. The edges of the door wrap around the left and right sides of the enclosure and the removable top panel to ensure the DVR’s safety. The right side panel is ventilated to allow air to flow freely through the cabinet. The left side panel includes a preinstalled cooling fan with washable air filter that blows cool air onto the DVR and prevents dust and airborne particles from entering the enclosure. Convenient rear and bottom ports with removable covers allow easy cable routing through the enclosure.The SRDVRLB comes fully assembled and ready to mount on a wall, floor or tabletop. Installing a security DVR within the enclosure is easy with its removable top panel, square mounting holes and numbered rack spaces. The front and rear mounting rails adjust in 1-inch increments to accommodate equipment from 1 to 16 inches deep.Saves Valuable Workspace● Perfect for network closets, retail outlets, warehouses, offices, classrooms and other locations where you need a security DVR to be protected from unauthorized access● Houses a rack or non-rack security DVR in 5U of rack space● Has maximum load capacity of 27 kgsKeeps Important Equipment Secure● Lockable front door overlaps side panels and removable top to protect DVR against damage, tampering or theft● Preinstalled cooling fan with washable air filter blows cold air and prevents dust from entering the enclosure● Vented side panel allows general airflow that keeps DVR cool● Convenient ports with removable covers allow cable routing through bottom and rearEasy Enclosure and Equipment Installation● Ships fully assembled for quick installation on a wall, floor or tabletop● Mounting plate’s holes spaced 16 in. apart to accommodate standard wall stud placement● Removable top panel allows easy access to DVR and cables● Front and rear mounting rails adjust in 1 in. increments from 1 to 16 in. deep● Rails adjust easily—unscrew them, slide them to desired depth, and screw them back in● Rails support square-hole mounting● Rack spaces numbered for easy referenceMeets Payment Card Industry Standards● Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance● Maximum load capacity of 27 kgs● Vertical mounting rails adjust from 1 to 16 in. deep● Locks securely to help prevent damage, tampering or theft● Preinstalled cooling fan with filter promotes ample airflow● Fully assembled and ready to mount to wall, floor or tablePackage Includes● SRDVRLB 5U Security DVR Lockbox Enclosure● (20) M6 screws● (20) M6 cage nuts● (20) M6 cup washers● (6) 10/32 screws● (6) 10/32 nuts● (2) Keys● Owner’s manual