Showing 170–180 of 603 results

Tripp Lite by Eaton SmartRack 3U Low-Profile Vertical-Mount Switch-Depth Wall-Mount Structured Wiring Enclosure Adjustable Equipment Brackets

The 4POSTRAILKITHD is an adjustable rack-mount shelf system that supports heavy UPS systems in 4-post rack-mount applications. Includes one pair of expandable ""L bracket"" mounting rails to offer front-to-rear support of select rack-mount UPS systems or other heavy pieces of networking or power protection equipment with a 17.5-inch-wide rectangular chassis. A pair of expandable ""L brackets"" adjust to any setting between 20.5 and 36 inches. The kit includes mounting hardware compatible with square-hole racks. Supports up to 500 pounds (226.8 kilograms)

Active Adapter Makes a DVI Video Source Compatible with Your VGA MonitorThis active DVI-D to VGA converter cable makes it possible to send a DVI-D digital signal from your computer or other source device to a VGA analog monitor. Connect the built-in 6-in. (15.2 cm) cable with DVI-D single-link male connector to the DVI port on your video source device. Then, connect a VGA cable, such as a P502-series VGA cable, from your monitor to the converter. The converter supports VGA cables up to 100-ft. (30.5 m), providing flexibility in device placement.Save Money without Sacrificing Image Quality This DVI-D to VGA active adapter helps you save money by making your current VGA monitor compatible with a computer or other source device equipped with a DVI output. It supports computer video resolutions up to 1920 x 1200 and HD resolutions up to 1920 x 1080 (1080p). Active digital-to-analog circuitry and quality manufacturing ensure a clean, consistent video signal.Simplify Installation with a Plug-and-Play SolutionCompletely plug and play, this DVI-D to VGA active adapter does not require software or drivers. The DVI-D cable is built-in, so the only cable you need to supply is your device's VGA cable. If your application requires power, use the included USB Micro-B cable to connect the converter to a USB port on your monitor or a USB wall outlet.3-Year WarrantyThe P120-06N-ACT is backed by a 3-year warranty, ensuring reliability and performance.

Connect a High-Performance External Drive to Your Computer’s USB-C or Thunderbolt 3 PortWhen the hard drive on your computer is not large enough to hold your entire video game library, the U457-1M2-NVME-L helps you add external storage and access files stashed on NVMe drives. This dependable gaming enclosure adapter allows you to connect an M.2 NVMe (non-volatile memory express) or SATA SSD (solid state drive) to your computer’s USB-C or Thunderbolt 3 port.Transfers Data at Fast USB 3.2 Gen 2 Speeds with UASP SupportThis adapter supports USB 3.2 Gen 2 data transfer rates up to 10 Gbps to give you faster data storage, retrieval and backup capacity. It reads data up to 70 percent faster and writes up to 40 percent faster when connected to a UASP (USB Attached SCSI Protocol) host controller. The enclosure is backward compatible with previous USB generations, allowing you to use it with older equipment. It works with Windows, macOS and Linux operating systems.Ideal for Static Gaming Computer Installations or Gaming on the GoStoring, managing and accessing your video game library on external NVMe or SSD allows for more flexibility, smoother operation and less time spent on loading screens than traditional internal HDD (hard disk drive). Alternating RGB (red/green/blue) LED lighting fits the popular modern gaming aesthetic seen on mice, keyboards, computer towers and other aspects of computer gaming installations. The slim aluminum case fits easily into your laptop bag or backpack so you can take it with you wherever you go.Compatible with a Variety of M.2 NVMe or SATA SSD Hard DrivesThe U457-1M2-NVME-L is compatible with a wide range of external storage drives and sizes, including 2230, 2242, 2260 and 2280 SSD. It is compatible with M-Key, B+M Key (SATA) and B+M Key (NVMe) SSD types. A blue LED on the front panel indicates data is transferring properly.Just Plug and Play with No Software or Power Supply RequiredThe enclosure works right out of the box. Simply open the enclosure with the included mini screwdriver, insert your M.2 NVME or SATA SSD drive (not included), and plug the enclosure into the host computer's USB-C or Thunderbolt 3 port with the included USB-C cable. Bright LEDs illuminate as soon as the device is connected. No software, drivers or external power supply is required.

Connects a Larger Display to Your Notebook or Laptop ComputerThis external video adapter allows you to reproduce the image on your laptop screen on a larger display. Just connect the U344-001-HDMI-R’s built-in USB-A plug to your computer’s USB port, and connect the adapter’s HDMI port to an HDMI-enabled monitor, HDTV or projector with a user-supplied HDMI cable (sold separately). You can extend video across both screens, do multiple presentations from a single computer, or play video on one display while working on another. You can use up to six U344-001-HDMI-R adapters at the same time, adding as many as six additional displays and extending a video signal across all of them.Supports High-Definition 1080p VideoThe U344-001-HDMI-R supports HD video resolutions up to 2048 x 1152, including 1080p, at 60 Hz. Featuring 512 MB DDR2 SDRAM of memory, the plug-and-play adapter is bus-powered, so no external power adapter is required. It supports USB 3.2 Gen 1 data transfer rates up to 5 Gbps, and is backward compatible with USB 2.0.Broadly Compatible with Most Major Operating SystemsThe U344-001-HDMI-R works with Windows 7 and later (32- and 64-bit), Intel Mac OS X 10.8.5 and later, Mac 10.11 (32- and 64-bit), and Surface tablets running non-RT Windows 8, 8.1 and 10. Check the owner’s manual for system requirements when using multiple adapters or using the add-on monitor for DVD playback.

The SRWALLBRKT6U SmartRack® 6U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch server rack.Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 6U wall-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.Use the included hardware to attach your 6U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 200 lbs (90.7 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT6U is compatible with most EIA-standard 19-inch two-post rack equipment.

The SRWALLBRKT2U SmartRack® 2U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch server rack.Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 2U rack-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.Use the included hardware to attach your 2U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 175 lbs (79.4 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT2U is compatible with most EIA-standard 19-inch two-post rack equipment.

Tripp Lite Remote Control Cooling Management LX Platform SNMP Select Models - 1 x Network (RJ-45) Port(s) - USB - TAA Compliance

Cable Ladder Connector Creates 90-Degree Splices in the Runway System in Your Data CenterThis SmartRack junction-splice kit creates a secure connection point between two perpendicular sections of cable ladder in your server room or data center. This allows you great flexibility in creating custom cable management schemes and keeping them organized. All mounting and installation hardware is included. The corner clamp plates fit solid and tubular steel runway measuring 1.5 x 0.375 inches (38 x 9.5 millimeters). The SRLJUNCTSPLICE is designed to connect SRCABLELADDER, SRCABLELADDER18, SRL90BEND12, SRL90BEND18 and other compatible straight and 90-degree ladder sections.

Cable Ladder Triangular Support Bracket Secures Your Data Center’s Runway System to a WallThis innovative SmartRack cable runway wall support kit creates a secure connection between your server rack and the wall of your server room or data center. Mounting and installation hardware is included, except for appropriate fasteners to secure the durable aluminum wall bracket. The mounting surface must be able to support the combined equipment load safely. Be sure to use suitable mounting means when installing to cinder block, concrete, drywall or wooden studs. The SRLTRISUPPORT is constructed of 0.25 x 2 inches (6 x 51 millimeters) aluminum and supports up to 100 pounds (45 kilograms). It is designed for SRCABLELADDER, SRCABLELADDER18, SRL90BEND12, SRL90BEND18 and other compatible straight and 90-degree ladder sections.