Showing 60–70 of 414 results

The SR48UBDPWD is a deeper and wider version of our standard 48U SmartRack® cabinet. This enclosure is 1143 millimeters deep (45 inches) compared to the standard 1050 millimeters deep. This extra depth allows for high-density equipment installations. It allows extra space for moving the cable management back, as well as providing space for mounted equipment that has hot-swap, removable power supplies out the back of the enclosure. It is also 750 millimeters wide (30 inches) compared to the standard 600 millimeters. This extra width allows for high-density equipment installations. It allows cable management and PDU mounting off to the sides of the rack in order to keep these items out of the airflow for proper cooling.The SR48UBDPWD features a massive front-to-rear ventilation capacity that meets or exceeds server manufacturer requirements. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also compatible with hot-aisle/cold-aisle configurations.With its locking, reversible, removable front and rear doors and locking, removable side panels, the SR48UBDPWD provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR48UBDPWD meets all requirements toward PCI DSS compliance.The top panel of the SR48UBDPWD is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing and can be quickly removed without tools. To facilitate cable access, the SR48UBDPWD is open-bottom.All components of the SR48UBDPWD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.It houses 3,000 pounds (1360.8 kilograms) of standard 19-inch rack equipment in 48U. To simplify deployment, the SR48UBDPWD comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: The casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.

SmartRack® SR1UBRUSH is a 1U cable pass-through panel with brush strip. The brush strip blocks unwanted airflow inside rack enclosures and server cabinets. The SR1UBRUSH improves cooling efficiency and segregates cold aisle from hot aisle.

Tripp Lite NetController 16-Port 1U Rack-Mount Console KVM Switch with 19-in. LCD - 16 Computer(s) - 19" Active Matrix TFT LCD - 16 x HD-15 Keyboard/Mouse/Video - RoHS, TAA Compliance

Eaton Tripp Lite Series SmartRack 6U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet 36" Deep Wall Mountable for Server, UPS, Battery Pack, LAN Switch - Black - Steel - 149.91 lb x Maximum Weight Capacity - 149.91 lb x Static/Stationary Weight Capacity

UPSHDEARKIT front-mount support bracket system accommodates 2U UPS systems in 4-post rack-mount applications by using only the front vertical rails of the cabinet. Two included ""L bracket"" mounting ears offer front support of any 2U rack-mount chassis up to 65 pounds.

The SRWALLBRKT4U SmartRack® 4U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch wall-mount rack.Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 4U wall-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.Use the included hardware to attach your 4U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 175 lbs (79.4 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT4U is compatible with most EIA-standard 19-inch two-post rack equipment.

Tripp Lite 10U Wall Mount Rack Enclosure Server Cabinet w/Swinging Door Acrylic Window - For LAN Switch - 10U Rack Height - Wall Mountable - Black - Plexiglass - 200 lb Maximum Weight Capacity - 200 lb Static/Stationary Weight Capacity

Tripp Lite by Eaton SmartRack 4U Low-Profile Vertical-Mount Switch-Depth Wall-Mount Rack Enclosure Cabinet

Permanently Mounts a Power Strip or Surge Protector in Your Healthcare FacilitySafely attach a medical-grade power strip or surge protector to an IV pole, hospital bed, crash cart, mobile medical workstation, hospital bed rail, crib or anywhere else needing portable power. The PSCLAMP2’s drip shield protects outlets from falling liquids and other contaminants that could damage the power strip or connected equipment. A built-in cord management system keeps the power strip’s cabling organized and safely out of the way when not in use to reduce tripping hazards.Exclusive, Patented Antimicrobial Protection Fights Healthcare-Acquired Infections (HAIs)The mounting clamp is protected by a patented antimicrobial coating with EPA-registered and FDA-compliant silver ionic technology. The antimicrobial surface protection is 99.9 percent effective in inhibiting the growth of bacteria, such as C. diff and MRSA, and reducing the risk of HAIs in hospitals and other medical environments. The coating meets the requirements of JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.Works with Nearly All Brands of Power Strip, Including Tripp LiteAll necessary hardware is included for mounting the lightweight aluminum PSCLAMP2 to pole diameters from .875 inches to 1.25 inches. It not only mounts Tripp Lite’s line of medical-grade power strips, but those of other brands as well, bringing power to areas where wall outlets are scarce or impractical. The clamp is designed to last within busy medical environments and stand up to heavy use.Typical Applications- Permanently mount a medical-grade power strip or surge protector to an IV pole, medical cart, mobile workstation, hospital bed or crib inside a medical facility- Requires a tool to uninstall, meeting the latest compliance requirementsPackage Includes- (2) Mounting brackets- (2) Retainer brackets- (2) M6 Phillips-head screws, 12 mm- (4) M5 Phillips-head screws, 30 mm- Owner’s manual

The SmartRack® SRCAGENUTS1224 is compatible with all square-hole rack enclosure cabinets. Square-hole hardware kit has 50 12-24 cage nuts and 50 bolts to fasten equipment to square-hole rack-mount rails.