Showing 320–330 of 414 results

The SRWO8U22SD SmartRack 8U/12U/22U Expandable Ultra Low-Profile Patch-Depth Wall-Mount 2-Post Open Frame Rack is ideal for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling. It's compatible with EIA-standard 19-inch rack equipment that supports two-post mounting and a maximum mounting depth of 5.75 inches.Constructed from heavy-duty steel in a durable black powder-coated finish, the open-frame rack has a maximum load capacity of 150 lbs (68 kgs). The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion. It saves precious space and allows IT managers easy access for organizing, installing and servicing equipment and cabling.The rack is easy to assemble using the included hardware. The vertical mounting rails have threaded 12-24 holes for securing equipment to the steel frame.

Adds rear support for select Tripp Lite 1U ATS PDUs mounted in 4-post racks and rack enclosures. Prevents the PDU from sagging under the weight of heavy input plugs and power cables hanging from its rear.- Rail segments attach to both the rack and PDU- Compatible with rack depth settings from 22.8 to 36 in.- Compatible with EIA-standard 4-post racks and enclosures- Works with select Tripp Lite 1U ATS PDUs only- Requires included and user-supplied mounting hardwareThe PDU4PKIT Rear Support Rail Kit adds rear mounting support for select Tripp Lite 1U ATS PDUs in EIA-standard 4-post racks and rack enclosures. With sliding support rails attached to both the rack and the PDU, the PDU4PKIT allows the PDU to support heavy plugs and power cables hanging from its rear panel without sagging under their weight. Front rail segments attach to compatible PDUs with included mounting screws. Rear rail segments attach to rack’s vertical mounting rails with user-supplied cage nuts and mounting screws. The adjustable sliding rails are compatible with rack depth settings from 22.8 to 36 inches. The convenient rails also help one person mount the PDU without assistance from others. Works with Tripp Lite PDUMNH16HVAT, PDUMNH20HVAT and other PDU models that specify compatibility.Adds Rear Support for Select Rack-Mounted 1U ATS PDUs- Allows the PDU to support heavy plugs and power cables hanging from its rear panel without sagging under their weight- Sliding support rails attach to both the PDU and the rack’s rear vertical mounting rails- Compatible with EIA-standard 4-post racks and enclosures- Compatible with rack depth settings from 22.8 to 36 in.- Works with Tripp Lite PDUMNH16HVAT, PDUMNH20HVAT and other PDU models that specify compatibility- Requires included and user-supplied mounting hardware

Tripp Lite SRGROUNDPANELBC. Type: Grounding bar, Product color: Black, Rack capacity: 1U. Width: 2"" (50.8 mm), Depth: 19"" (482.6 mm), Height: 1.72"" (43.7 mm). Package width: 3.1"" (78.7 mm), Package depth: 21.7"" (551.2 mm), Package height: 3.1"" (78.7 mm). Master (outer) case width: 16.3"" (415 mm), Master (outer) case length: 23.2"" (590 mm), Master (outer) case height: 12.8"" (325.1 mm)

1U Vented Cantilevered Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® cantilevered shelf supports monitors, power strips, PDUs, wireless access points and other network and IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRWSHELF4P1U has a maximum load capacity of 50 lbs (22.2 kgs). Its adjustable rails mount easily into 1U of space in EIA-standard 19-inch enclosures and open frame racks using included hardware.Custom Setup Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is 14.2 inches deep. The surface is perforated with square mounting holes that accept cage nuts, giving you multiple options for installing equipment for convenient access. The vented surface also augments proper airflow to keep your equipment cool and functioning at its peak. Built-in flexible cable rings help you manage and secure cabling and cut down on intrusive cord clutter.

Connect a High-Performance SATA Drive to Your Computer’s USB-C or Thunderbolt 3 PortThis SATA enclosure is idea for adding external storage space when your laptop’s hard drive has no more room for your photos, videos, music and documents. The U457-025-G2-WPB lets you connect a SATA solid state drive (SSD) or hard disk drive (HDD) to any device with a USB-C or Thunderbolt 3 port, including a MacBook, Ultrabook, Chromebook, notebook, tablet or PC. It also helps you retrieve data stashed on old 2.5-inch SATA III, II and I drives up to 2 TB. It will also support higher SATA capacities as they become available.Transfers Data at Fast USB 3.1 Gen 2 Speeds with UASP SupportThis adapter supports USB 3.1 Gen 2 data transfer rates up to 10 Gbps, which is twice the speed of USB 3.1 Gen 1, to give you more data storage, retrieval and backup capacity. A blue LED indicates when drive data is being read, written or transferred. The U457-025-G2-WPB reads data up to 70 percent faster and writes up to 40 percent faster when connected to a UASP-enabled host controller. It is also backward compatible with previous USB generations, allowing you to use it with older equipment.IP66 Rating Denotes Resistance to Dust and WaterThe IP66 rating means the SATA enclosure is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, the U457-025-G2-WPB is shockproof, giving you peace of mind without worrying about dropping and damaging the unit.Built-In USB-C Cable Attaches in Either DirectionUnlike traditional USB cables that connect in only one direction, the reversible USB-C male connector plugs into a USB-C or Thunderbolt 3 port in either direction for a fumble-free connection every time. The seven-inch wraparound cable stores within the adapter, ensuring it will never become lost.Just Plug and Play for Immediate Use Right Out of the PackageNo software, drivers or external power supply is required. The U457-025-G2-WPB is compatible with all USB-enabled operating systems, including Windows, Mac and Linux. Its dustproof, shockproof, IP66-rated case fits easily into your laptop bag, backpack or briefcase, so you can take it with you wherever you go.

Provides Convenient Ground Contact for Your Rack-Mounted EquipmentThis SmartRack® grounding bar is a thin strip of heavy-gauge solid copper that attaches to any EIA-standard 24U or 25U rack enclosure or open frame rack. Every other U space has a drilled and tapped hole to allow a ground wire jumper to be installed, providing convenient ground contact for standard rack equipment. The jumper then bridges to individual rack components, with grounding straps, allowing a direct path to ground, rather than going through surrounding equipment.Easy to Install with All Hardware IncludedYou can mount the SRGROUND25 in any EIA-standard 24U or 25U rack enclosure or open frame rack. Either screw it into a rack enclosure using the included mounting hardware, or install it in an open frame rack with the included toolless mounting buttons. This copper grounding bar is ideal for large data centers that contain ground-sensitive equipment.

Tripp Lite U442-DOCK20-VMB. Weight: 5.29 oz (150 g). Package width: 5.59"" (142 mm), Package depth: 1.18"" (30 mm), Package height: 6.69"" (169.9 mm)

Tripp Lite's SmartRack SRGASKET is an Airflow Optimization Kit that works with all SmartRack enclosures (25U, 42U, 45U, 48U). It improves cooling efficiency by blocking recirculation of warm air through side gaps. The SRGASKET supports equipment with front-to-rear or side-to-side airflow.Airflow Optimization Kit that works with all SmartRack enclosures (25U, 42U, 45U, 48U)Improves cooling efficiency by blocking recirculation of warm air through side gapsSupports equipment with front-to-rear or side-to-side airflow

The 4POSTRAILSM 4-Post Rack-Mount Installation Kit supports heavy UPS systems in your EIA-standard four-post rack. The two L brackets mount to the outside edges of the rack's vertical mounting rails - the edges facing the side panels - using the rails' square mounting holes. Attaching the 4POSTRAILSM to the side leaves your front and rear mounting holes free for equipment.The brackets support up to 250 lbs (113.4 kgs) and are compatible with four-post racks with a mounting depth of 16.5 to 21.5 inches. In addition to UPS systems, the 4POSTRAILSM is compatible with other heavy networking or power protection equipment with a rectangular chassis of 17.5 inches in width. Rack-attachment hardware for square-hole mounting is included.

The N482-00U High-Density Fiber Cassette Sleeve is a cost-effective solution for adding a single N482-Series fiber cassette to your network application without buying a chassis. Made of heavy-duty cold-rolled steel, this space-saving 0U sleeve mounts to the metal surface of your EIA-standard 19-inch rack or cable manager via two attached magnets.The N482-00U is recommended for adding an extra cassette to a rack application without the expense of a new 1U chassis, as well as adding fiber connectivity where no existing rack infrastructure exists, such as a remote workstation, new build-out or temporary install location. It reduces cable clutter by allowing you to connect cables at the cable manager through which they are being routed.The N482-00U accommodates N482-Series cassettes, including LC and MTP/MPO connector types. It allows you to connect 10 GbE, 40 GbE and 100/120 GbE network equipment with elegance, ease and little cost. The fully passive sleeve adds no heat or cooling load.