Showing 0–10 of 60 results

The U428-000-F USB 3.1 Gen 1 Adapter connects your new USB-C smartphones, tablets, Ultrabooks and computers to your existing USB-A devices or cables in order to share data or charge a mobile device. It supports USB 3.1 Gen 1 data transfer speeds up to 5 Gbps and power output up to 3A for fast charging of mobile devices. Unlike traditional USB connectors that can be attached only one way, the reversible USB-C male connector plugs into a USB port in either direction for fast, fumble-free connection every time. Nickel-plated molded end connectors and gold-plated copper contacts ensure superior conductivity and long life. Slim form supports evolving design trends toward smaller devices. Backward compatible with USB 2.0 devices.USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum

Connects a USB-C Device to Your Computer or Laptop’s USB-A PortThe U329-000 lets you connect a device with USB-C capabilities, such as a smartphone, tablet or hard drive, to the USB-A port on your PC, laptop or USB hub. The palm-sized adapter fits to the end of a USB-C cable, giving you maximum flexibility and more opportunities to share data or charge your phone using a USB-A laptop or wall charger. Note: This adapter does not support video.Transfers Data at Fast USB 3.2 Gen 1 SpeedsThis USB adapter supports USB 3.2 Gen 1 data transfer speeds up to 5 Gbps, which is 10 times faster than USB 2.0. It also produces up to 0.9A for charging and powering mobile devices. The U329-000 is backward compatible with previous USB generations, so you can continue using older devices while getting high-speed performance from new devices.Ready to Use Right Out of the PackageThe plug-and-play USB 3.2 Gen 1 adapter is specifically designed to accept USB-C and Thunderbolt 3 plugs from a wide variety of cables, hubs, hard drives, adapters and other compatible devices. It requires no software or external power. It is small enough to carry in your pocket, purse, briefcase or laptop bag, so you’ll always be ready to connect wherever you are.

Transmits 2 Ethernet Signals Through a Single Network CableThis RJ45 splitter/adapter (M/2xF) lets you transmit two 10/100 Mbps Ethernet signals through one Cat5/Cat5e network cable, saving you the time, effort and cost of adding a second cable drop. Note: Two N035-001 adapters are required: one connected to two network devices, such as servers or computers, and one connected to two ports of a network switch.Simple Plug-and-Play InstallationOne Cat5/Cat5e cable connects both N035-001 adapters through a four-pair UTP wall plate or patch panel. The RJ45 jacks transmit on 1, 2, 3 and 6. Built-in flanges allow mounting on a wall or other flat surface. Note: The N035-001 cannot be used to share two computers on one network line.

The U040-000-MIC-F USB 2.0 Hi-Speed Adapter (M/F) allows you to connect an existing USB Micro-B cable between the USB-C port on your computer, laptop or tablet and a USB-A host port. This allows you to sync and charge your USB-C device without the extra expense of a new USB-C cable.The portable, compact adapter supports USB 2.0 data transfer speeds up to 480 Mbps. The reversible USB-C male connector plugs into a USB-C port in either direction for fast, fumble-free connection every time.Molded nickel-plated connectors with corrosion-resistant gold-plated contacts provide maximum conductivity and minimize data loss. The U040-000-MIC-F is backward compatible with previous USB generations.

HDMI Female to DVI-D Male Adapter allows newer HDMI cables to plug into DVI equipment. Gold-plated connectors and 24K gold contacts, along with a molded, rubberized plastic housing, assure long life use. Slotted thumbscrews allow for easy installation in close quarters. Supports computer video resolutions up to 1920 x 1200 or HD resolutions up to 1920 x 1080 (1080p).

Connects Your Computer’s USB-C Port to a Cisco DeviceDirectly connect the RJ45 console port on your Cisco modem, router, firewall, switch or other serial-based Cisco device to the USB-C port on your computer or laptop. The U209-006-RJ45XC supports data transfer rates up to 250 Kbps, as well as remote wake-up and power management. It is compatible with Windows, macOS and Linux.Filtering EMI/RFI Line Noise Helps Your Equipment Perform BetterThis Cisco-compatible cable blocks disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your network equipment and inflict hardware damage or data loss. Premium double-shielding eliminates crosstalk and helps your connected components perform better and last longer.Specifically Designed for Cisco EquipmentThe serial cable is compatible with both older and current Cisco models. It requires no external power or additional adapters. You may download and install the necessary driver from the product page at tripplite.eaton.com/support (see the included owner’s manual for directions).Compatible with Eaton G4 PDU Network CardThe U209-006-RJ45XC can be used for out of band (OOB) management to connect the USB-C port on the G4 network card to an RS232 port on a console server.

This coupler provides a simple and easy way to link together two cables with RJ11 plugs. The coupler is wired in a straight-through configuration. RJ11 female to RJ11 female.

If you have a VGA monitor but want to take advantage of the high-performance of a DVI-I video card, this adapter links your VGA monitor (with its HD15 male interface) to the DVI-I female interface. Consequentially, if you have a DVI-I monitor, this adapter will also allow you to connect your DVI-I monitor to a VGA enabled computer. DVI-A Male to HD15 Female.

Connects Computer’s USB Port to Cisco DeviceConnect computer or laptop to Cisco modem, router, firewall, switch or other serial-based Cisco device with a console portWorks with older and new Cisco models6 ft. longTop-of-the-Line PerformanceSupports data transfer rates up to 250 KbpsSupports remote wake-up and power managementUtilizes FTDI chipset.Easy to UseNo other cables or adapters neededNo external power requiredDriver CD included (drivers also available online for download if your computer has no CD drive)

The P134-000-VGA-V2 DisplayPort 1.2 to VGA Active Compact Adapter allows you to connect a computer with a DisplayPort connection to a VGA monitor. DisplayPort v1.2 doubles the previous version bandwidth of 8.64 Gbps to 17.28 Gbps in High Bit Rate (HBR2) mode, which allows increased resolutions, higher refresh rates and greater color depth. Fully molded one-piece design ensures longer life. Unlike passive adapters, active adapters convert both Single-Mode and Dual Mode (DP++) DisplayPort output. It is ideal for use with graphics cards, such as AMD Eyefinity, that do not output Dual Mode (DP++) signals.