Showing 0–10 of 21 results

Transition Networks Power over Ethernet Injector - 10/100/1000Base-T Input Port(s) - 10/100/1000Base-T Output Port(s)

transition Rem Mgd Ion Convrt W/ Ag

the Ion219-x Is An All New Intelligent, High-density, Multi-protocol System Supporting A Variety Of Network Interface Devices . Designed For Both Carrier Class And Enterprise Network Applications Where Multiple Points Of Fiber Integration And Secure Network Management Of The Fiber Interface Devices Is Essential. An End-to-end Fiber Integration Solution Can Be Achieve By Pairing The Modules In A High Density Ion Chassis With The Modules In Another Ion Chassis, An Ion Stand-alone, Or A Transition Networks'' Point System™ Stand-alone Device. To Take Full Advantage Of All The Features And Functions Available With The Ion Chassis, An Ion Management Module Is Required. The Ion Management Module Connects To The Chassis Backplane And Communicates With The Individual Cards In The Ion Chassis. Each Slide-in-module For The Ion Chassis Has Specific Features And Functions That Are Controlled Via The Ion Management Module. A Network Administrator Can Configure, Monitor And Troubleshoot Ion Slide-in-modules Remotely Via The Ion Management Module.transition Networks Understands That No Network Is Managed In The Same Manner And That Different Security Levels And Management Interfaces Are Often Required Depending On The Deployment Of The Ion Chassis. With That In Mind, The Ion Platform Has Been Designed To Be One Of The Most Versatile And Secure Fiber Intergration Systems Available Today.

Transition Networks Hardened 1-port Mid-span PoE+ Injector - 48 V DC Input - 1 x Ethernet Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 30 W - DIN Rail/Wall Mountable

MINI MEDIA CONVERTER 10/100/1000B-T TO 1000B-SX LC MM W/ -NA POWER SUPPLY

the Redundant Link Protector Is A 10/100 Ethernet Fault-tolerant Transceiver. It Significantly Reduces Network Downtime, Adding A New Level Of Redundancy To 10/100 Ethernet Connections. It Also Provides A Redundant Path For Critical 10/100 Devices. In A 10/100 Ethernet Network, A Critical Device Such As A File Server May Be Connected To The Rest Of The Network Through A Hub Or A Switch. A Common Problem In This Configuration Is That The Server Is Often Connected To The Network Through A Single Cable. If The Cable Fails, Then The Server Is Disconnected From The Rest Of The Network. Similarly, If A Port Of A Hub Or Switch To Which The Server Is Connected Fails, The Server Is Disconnected From The Network.

the Ds3 - T3/e3 Copper To Fiber Network Interface Device (nid) Provides A Solution For Those Users That Need To Extend Ds3 Connections Over Fiber.the Ds3 - T3/e3s Supports Small Form Pluggable (sfp) Transceivers To Support A Variety Of Fiber Types, Distances And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. The Use Of Coarse Wave Division Multiplexing (cwdm) Sfps Can Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure.the Ds3 - T3/e3 Nid Must Be Used In Pairs. A Typical Installation Will Include A Chassis Card Installed In The Ion Platform Locally And A Stand-alone Device Installed At The Remote Location.

the Ion S6120 Is A Managed Stand-alone T1/e1/j1 Media Converter Mux And Provides A Solution For Those Users That Need To Extend Multiple T1/e1/j1 Connections, Along With A 10/100 Ethernet Connection, All Over Fiber. The S6120 Includes (4) Rj-48 Ports, (1) 10/100 Ethernet Port, And (1) Fiber Port. The Device Is Available In Versions That Support Fixed Fiber Connectors As Well As Sfp Fiber Modules Offering Support For A Variety Of Fiber Types, Distances, And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. Cwdm Sfps Can Also Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure. The S6120 Converter Must Be Used In Pairs. Management Of The Stand-alone Converter Is Supported, In-band, Over The Fiber, When The Remote S6120 Is Linked To A C6120 Card Installed In A Managed Ion Chassis.

the Ion S6110 Is A Managed Stand-alone T1/e1/j1 Media Converter Mux And Provides A Solution For Those Users That Need To Extend Multiple T1/e1/j1 Connections Over Fiber. The S6110 Includes (4) Rj-48 Ports And (1) Fiber Port. The Device Is Available In Versions That Support Fixed Fiber Connectors As Well As Sfp Fiber Modules Offering Support For A Variety Of Fiber Types, Distances, And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. Cwdm Sfps Can Also Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure. The S6110 Converter Must Be Used In Pairs. Management Of The Stand-alone Converter Is Supported, In-band, Over The Fiber, When The Remote S6110 Is Linked To A C6110 Card Installed In A Managed Ion Chassis.

the T1/e1 Copper To Fiber Network Interface Device (nid) Provides A Solution For Those Users That Need To Extend T1/e1 Connections Over Fiber.the T1/e1 Supports Small Form Pluggable (sfp) Transceivers To Support A Variety Of Fiber Types, Distances And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. The Use Of Coarse Wave Division Multiplexing (cwdm) Sfps Can Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure.the T1/e1nid Must Be Used In Pairs. A Typical Installation Will Include A Chassis Card Installed In The Ion Platform Locally And A Stand-alone Device Installed At The Remote Location.