transition Rem Mgd Ion Convrt W/ Ag
Transition Networks Power over Ethernet Injector - 10/100/1000Base-T Input Port(s) - 10/100/1000Base-T Output Port(s)
the Ion219-x Is An All New Intelligent, High-density, Multi-protocol System Supporting A Variety Of Network Interface Devices . Designed For Both Carrier Class And Enterprise Network Applications Where Multiple Points Of Fiber Integration And Secure Network Management Of The Fiber Interface Devices Is Essential. An End-to-end Fiber Integration Solution Can Be Achieve By Pairing The Modules In A High Density Ion Chassis With The Modules In Another Ion Chassis, An Ion Stand-alone, Or A Transition Networks'' Point System™ Stand-alone Device. To Take Full Advantage Of All The Features And Functions Available With The Ion Chassis, An Ion Management Module Is Required. The Ion Management Module Connects To The Chassis Backplane And Communicates With The Individual Cards In The Ion Chassis. Each Slide-in-module For The Ion Chassis Has Specific Features And Functions That Are Controlled Via The Ion Management Module. A Network Administrator Can Configure, Monitor And Troubleshoot Ion Slide-in-modules Remotely Via The Ion Management Module.transition Networks Understands That No Network Is Managed In The Same Manner And That Different Security Levels And Management Interfaces Are Often Required Depending On The Deployment Of The Ion Chassis. With That In Mind, The Ion Platform Has Been Designed To Be One Of The Most Versatile And Secure Fiber Intergration Systems Available Today.
the Transition Networks Tn-glc-xxx Series Small Form Factor Pluggable (sfp) Tranceiver Modules Are Designed To Install In Any Sfp Port Allowing For 1000base-t, 1000base-sx Or 1000base-lx Interfaces To The Network Through The Sfp Connector. The Tn-glc-xxx Tranceivers Are Cisco Compatible* And Are Designed For Bi-directional Serial-optical Data Communication Such As Gigabit Ethernet Or Fiber Channel At Speeds Up To 1.25 Gbps.
transition Networks'' Sfp Modules Fully Comply With The Multi-sourcing Agreement (msa). This Compliance Allows Our Sfp Modules To Be Used In All Other Msa Compliant Sfp Platforms. In Addition, Tn-cwdm-sfp-1xx0 Modules Are Also Compatible With All Cisco Sfp-based Equipment, As Well As Cisco''s Ios Software. Tn Sfp Modules Are Not Cisco Oem Brand Modules.
the Transition Networks Tn-sfp-10g-xx Series 10g Sfp+ Transceiver Modules Are Designed To Install In Any Sfp+ Port Allowing For 10gbase-x Interfaces To The Network Through The Sfp+ Connector. The Tn-sfp-10gxx Transceivers Are Cisco Compatible* And Are Designed For Bi-directional Serial-optical Data Communication Such As 10g Ethernet At Speeds Up To 10.3 Gbps.
transition Networks''s Sfp Units Fully Comply With Multi-sourcing Agreement(msa). This Compliance Allows Transition Networks Sfp Modules To Be Used On Other Msa-compliant Sfp Platforms Without Any Problems.
the T1/e1 Copper To Fiber Network Interface Device (nid) Provides A Solution For Those Users That Need To Extend T1/e1 Connections Over Fiber.the T1/e1 Supports Small Form Pluggable (sfp) Transceivers To Support A Variety Of Fiber Types, Distances And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. The Use Of Coarse Wave Division Multiplexing (cwdm) Sfps Can Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure.the T1/e1nid Must Be Used In Pairs. A Typical Installation Will Include A Chassis Card Installed In The Ion Platform Locally And A Stand-alone Device Installed At The Remote Location.
the Ion C6120 Is A Managed T1/e1/j1 Mux Media Converter Module And Provides A Solution For Those Users That Need To Extend Multiple T1/e1/j1 Connections, Along With A 10/100 Ethernet Connection, All Over Fiber. The C6120 Includes (4) Rj-48 Ports, (1) 10/100 Ethernet Port, And (1) Fiber Port. The Device Is Available In Versions That Support Fixed Fiber Connectors As Well As Sfp Fiber Modules Offering Support For A Variety Of Fiber Types, Distances, And Wavelengths To Provide Maximum Flexibility Across A Variety Of Network Topologies. Cwdm Sfps Can Also Be Utilized To Further Increase The Bandwidth Capacity Of The Fiber Infrastructure. The C6120 Converter Must Be Used In Pairs. A Typical Installation Will Include A Modular Card Installed In A Managed Ion Chassis Linked Over Fiber To A Stand-alone S6120 In A Remote Location.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA