Showing 0–10 of 337 results

Extend a 10/100/1000Mbps network up to 0.6mi (1km) using RJ45 or RJ11 cablingExtend a network over VDSL2, using Cat5e (or better) UTP Cabling or Single-Pair (or better) Telephone Wire at distances up to 0.6mi (1km).Extend Network ConnectivityExtend a network over VDSL2 using UTP, CAT5e/6 or RJ11 cabling over distances up to 0.6mi (1km). Speeds of up to 300 Mbps (aggregated) are available at shorter distances. Supports VDSL2 35b/30a/17a and features ITU-T G.993.5 G.Vectoring and G.INP technologies.Thoughtful DesignThe installation can be customized by using DIP switches. Choose between Master or Remote mode, Symmetric or Asymmetric mode, G.INP or Interleave mode, and fine-tune SNR with High and Low options for optimal performance. The Gigabit Ethernet Extender has LEDs that provide a visual indication of network status, including LAN speed, link status, power, and remote/master mode, allowing IT administrators to monitor and assess network connectivity.Versatile ApplicationsThe Long-Range LAN Extender can be mounted on a wall, using the included hardware, or installed on a shelf or other surface. The kit includes two power adapters, one for each VDSL Extender. The extender works with third-party VDSL2 IP DSLAMs in CPE (RT) mode and extends the network for applications such as remote office or branch locations or IP-based video solutions. The 802.1Q VLAN tag transparency preserves VLAN-tagged traffic across the extension.The StarTech.com Advantage

Supply power and data to a remote Powered Device (PD) with this PoE/PoE+ injectorThis 1-port multi-speed PoE+ Injector serves as a Power Sourcing Equipment (PSE) device and enables Ethernet speeds of 10Mbps, 100Mbps, and 1Gbps. This TAA-compliant mid-span inline injector can transmit network data and power up to 328ft (100m) for remote Powered Devices (PD).Versatile PoE InjectorSingle port PoE injector supports the IEEE 802.3af and 802.3at PSE standards, and delivers up to 30W output (54V DC, 0.6A). This enables seamless data and power transmission over Cat5/5e/6/6a to remote Powered Devices (PD) such as IP cameras, access control devices, remote kiosks (POSs), wireless access points (APs), PoE lighting, and digital signage. A built-in LAN Transformer reduces EMI to maintain strong, reliable signal strength across different environments.Streamlined Cable ManagementAll Ethernet cables can be routed from one side of the unit for efficient and organized cable management. The compact design (4x2.3x1.3-inch-100x58.4x33.4 mm) ensures straightforward integration into existing network infrastructure, saving space and time during installation.The StarTech.com Advantage

Enhance the networking infrastructure with this HPE®-compatible 25GBase-SR optical transceiver, ensuring reliable performance and seamless connectivity at distances of up to 100mThis fiber optic transceiver is the direct equivalent to HPE® JL484A for 25Gbps connectivity up to 100m (328ft) over LC-terminated Multimode Fiber (MMF) cable. The optical module has been programmed and tested for seamless integration with HPE® switches and routers to ensure compatibility and reliability.Maximize BandwidthThe 25GbE SFP28 excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Technical Specifications• 25GBASE-SR SFP28• Data Rate: 25Gbps• Fiber Type: Multimode Fiber (MMF)• Connector: LC• Wavelength: 850nm Tx/Rx• Distances: Up to 100m (328ft)• Supports Digital Diagnostics Monitoring (DDM/DOM)CompatibilityThis MSA-compliant SFP works with network equipment manufactured by HPE® and network equipment from manufacturers that accept uncoded optical modules.Optimized Network ReachThe Short Range (SR) capability facilitates low-latency and scalable onsite connections within a data center or subnetworks within a building.The StarTech.com Advantage

Convert and extend different networks over a Gigabit fiber cable connection up to 550m / 1804ftThis fiber media converter offers an easy, cost-effective way to extend your network over Gigabit fiber. It is equipped with a multimode transceiver which converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances or connect workstations to switches. The converter provides a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access.Cost-effective extension and dependable performanceThe Gigabit Fiber Media Converter provides a cost-effective and dependable solution for shorter range network extensions. It connects an Ethernet network to remote devices over a fiber backbone, with a 550m range on the fiber optic interface. The media converter has a durable metal housing, engineered to deliver long-lasting performance.Versatile connections for broad compatibilityFully compatible with 10/100/1000Base-T Ethernet networks, the fiber media converter supports auto negotiation to bridge different speed networks and devices to a Gigabit fiber network. It provides versatile connectivity to your existing networks and devices, allowing you to maximize the usage and performance of legacy equipment.The multimode transceiver is removable, giving you the flexibility to change your transceiver in the future to meet your networking needs.Easy installation and compact convenienceThe unmanaged fiber media converter has a standalone design with simple plug-and-play set-up to ensure fast and easy installation. Compact in size, the converter gives you flexible installation options - including a wall mounting option to save space.The MCM1110MMLC is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Convert between an RJ45 copper Ethernet connection and a fiber optic connection to extend your network cost-effectively- 10/100/1000 Mbps RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network- Compact standalone design and wall mounting option for easy and convenient installation

Enhance the networking infrastructure with this Cisco®-compatible 25GBASE-SR optical transceiver, ensuring reliable performance and seamless connectivity at distances of up to 100mThis fiber optic transceiver is the direct equivalent to Cisco® SFP-25G-SR-S for 25Gbps connectivity up to 100m (328ft) over LC-terminated Multimode Fiber (MMF) cable. The optical module has been programmed and tested for seamless integration with Cisco® switches and routers to ensure compatibility and reliability.Maximize BandwidthThe 25GbE SFP28 excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Technical Specifications• 25GBASE-SR SFP28• Data Rate: 25Gbps• Fiber Type: Multimode Fiber (MMF)• Connector: LC• Wavelength: 850nm Tx/Rx• Distances: Up to 100m (328ft)• Supports Digital Diagnostics Monitoring (DDM/DOM)CompatibilityThis MSA-compliant SFP works with network equipment manufactured by Cisco and network equipment from manufacturers that accept uncoded optical modules.Optimized NetworkThe Short Range (SR) capability facilitates low-latency and scalable onsite connections within a data center or subnetworks within a building.The StarTech.com Advantage

Supply power and data to a PoE device over standard Ethernet cablingThis 1-Port multi-speed PoE++ Injector serves as a Power Sourcing Equipment (PSE) device and enables Ethernet speeds of 10/100 Mbps/1000Mbps and 1/2.5/5/10Gbps. This TAA-compliant mid-span inline injector can transmit network data and power up to 328ft (100m) for single Powered Devices (PD).Versatile PoE InjectorSingle port PoE+ injector supports the IEEE 802.3af and 802.3at PSE standards, and delivers up to 60W output (54V, 1.11A). Connect a remote PoE device to a network at a location where there is no power source, but an Ethernet cable already exists. This includes access points, IP cameras, VoIP phone systems, IPTV and access controls. The flexible design of the PoE injector allows for either desktop or surface-mount use.Streamlined Cable ManagementAll Ethernet cables can be routed from one side of the unit for efficient and organized cable management. The compact design (4x2.3x1.3-inch / 100x58.4x33.4mm) ensures straightforward integration into existing network infrastructure, saving space and time during installation.The StarTech.com Advantage

Enhance the networking infrastructure with this Cisco®-compatible 25GBASE-LR optical transceiver, ensuring reliable performance and seamless connectivity at distances of up to 10kmThis fiber optic transceiver is the direct equivalent to Cisco® SFP-25G-LR-S for 25Gbps connectivity up to 10km (6.2mi) over LC-terminated Single Mode Fiber (SMF) cable. The optical module has been programmed and tested for seamless integration with Cisco® switches and routers to ensure compatibility and reliability.Maximize BandwidthThe 25GbE SFP28 excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Technical Specifications• 25GBASE-LR SFP28• Data Rate: 25Gbps• Fiber Type: Single Mode Fiber (SMF)• Connector: LC• Wavelength: 1310nm Tx/Rx• Distances: Up to 10km (6.2mi)• Supports Digital Diagnostics Monitoring (DDM/DOM)CompatibilityThis MSA-compliant SFP works with network equipment manufactured by Cisco and network equipment from manufacturers that accept uncoded optical modules.Optimized Network ReachThe Long Range (LR) capability facilitates long-distance connections across or under large buildings, urban and rural network installations, and strategic singlemode fiber cable runs.The StarTech.com Advantage

Enhance the networking infrastructure with this HPE®-compatible 25GBASE-LR optical transceiver, ensuring reliable performance and seamless connectivity at distances of up to 10kmThis fiber optic transceiver is the direct equivalent to HPE® JL486A for 25Gbps connectivity up to 10km (6.2mi) over LC-terminated Single Mode Fiber (SMF) cable. The optical module has been programmed and tested for seamless integration with HPE® switches and routers to ensure compatibility and reliability.Maximize BandwidthThe 25GbE SFP28 excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Technical Specifications• 25GBASE-LR SFP28• Data Rate: 25Gbps• Fiber Type: Single Mode Fiber (SMF)• Connector: LC• Wavelength: 1310nm Tx/Rx• Distances: Up to 10km (6.2mi)• Supports Digital Diagnostics Monitoring (DDM/DOM)CompatibilityThis MSA-compliant SFP works with network equipment manufactured by HPE® and network equipment from manufacturers that accept uncoded optical modules.Optimized Network ReachThe Long Range (LR) capability facilitates long-distance connections across or under large buildings, urban and rural network installations, and strategic singlemode fiber cable runs.The StarTech.com Advantage

Enhance the networking infrastructure with this MSA-compatible 25GBASE-LR optical transceiver, ensuring reliable performance and seamless connectivity at distances of up to 10kmMSA-compliant fiber optic transceiver with 25Gbps connectivity up to 10km (6.2mi) over LC-terminated Single Mode Fiber (SMF) cable. The optical module has been programmed and tested for seamless integration with MSA-compatible switches and routers to ensure compatibility and reliability.Maximize BandwidthThe 25GbE SFP28 excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Technical Specifications• 25GBASE-LR SFP28• Data Rate: 25Gbps• Fiber Type: Single Mode Fiber (SMF)• Connector: LC• Wavelength: 1310nmTx/Rx• Distances: Up to 10km (6.2mi)• Supports Digital Diagnostics Monitoring (DDM/DOM)CompatibilityThis MSA-compliant SFP works with network equipment from manufacturers that accept uncoded optical modules.Optimized Network ReachThe Short Range (SR) capability facilitates low-latency and scalable onsite connections within a data center or subnetworks within a building.The StarTech.com Advantage

10 Gbps | Multi Mode Fiber | LC | 300 m (984 ft) | Lifetime WarrantyThe MASFP10GBSR is a Cisco Meraki MA-SFP-10GB-SR compatible fiber transceiver module that has been designed, programmed and tested to work with Cisco Meraki™ brand switches and routers. It delivers dependable 10GbE connectivity over fiber cable, for 10GBASE-SR compliant networks, with a maximum distance of up to 300 m (984 ft).Technical Specifications:• Wavelength: 850nm• Maximum Data Transfer Rate: 10 Gbps• Type: Multi Mode Fiber• Connection Type: LC Connector• Maximum Transfer Distance: 300 m (984 ft)• MTBF: 1,967,709 hours• Power Consumption: Less than 1.2 Watts• Digital Diagnostics Monitoring (DDM): YesThis SFP+ fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.StarTech.com SFPsAll StarTech.com SFP & SFP+ transceiver modules are backed by a lifetime warranty and free lifetime multilingual technical support. StarTech.com offers a wide variety of SFP modules and direct-attach SFP cables, providing the convenience and reliability you need to ensure dependable network performance.The StarTech.com Advantage