Showing 270–280 of 657 results

Gear up for the field with portable hard drive protectionThis rugged drive enclosure redefines data protection for on-the-go professionals. The military-grade construction protects your sensitive data from harsh field conditions. It makes sure you’re equipped for unexpected challenges with a ruggedized water, dust, vibration and shock resistant enclosure.Industry recognized protection against water and dust, with an IP54 ratingKeep your data safe and secure even through sudden downpours or dust storms. The robust enclosure provides superior water and dust resistance with an IP54 rating.Drop tested for 4 meters (13 feet)The rugged drive enclosure is enveloped in a silicone protective sleeve, and engineered to help protect your drive from accidental and unexpected shock, vibrations, and drops. It’s Military MIL-STD-810G rated and test-proven to withstand drops of up to 4 meters (13 feet). It was drop tested using a solid-state drive in the enclosure.Data protection inside and outWherever you go, the rugged drive enclosure delivers reliable data protection, inside and out. The tough-wearing exterior casing provides shock-resistance, while the flexible silicone sleeve hugs the entire perimeter to ensure an extra measure of protection, absorbing the impact of accidental bumps, rough baggage handling or drops. Inside, an extra layer of silicone provides added drive stability.Install your drive with ease, with a tool-less designIt’s easy to turn your 2.5in SATA III (6Gbps) solid-state drive or hard drive into external storage. Simply remove the silicone sleeve, open the latch to insert your 2.5"" drive into the rugged enclosure, and plug the included USB cable into the computer or hub USB port. There are no screws or tools needed.70% faster than traditional USB 3.0, with UASPSave time in the field, by storing and transferring content quickly. Enhanced with UASP (USB Attached SCSI Protocol), this rugged drive enclosure performs with a 70% faster read speed and 40% faster write speed over conventional USB 3.0, when paired with a UASP-enabled host controller.UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.At the same peak in testing UASP also shows an 80% reduction in required processor resources.Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled StarTech.com enclosure, and a SATA III (6Gbps) solid state drive.The S251BRU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Protect your data even in the toughest field conditions- Military Rated (MIL-STD-810G) drive enclosure provides exceptional shock resistance- Outstanding water and dust resistance with IP-54 rating

Mount your server or networking equipment using this 12U wall mount rackThis open-frame wall-mount server rack provides 12U of storage, allowing you to save space and stay organized. The equipment rack can hold up to 198 lb. (90 kg).Easy, hassle-free installationThe network rack is 12 in. (30.4 cm) deep, so it’s perfect for smaller spaces. It’s easy to assemble and features mounting holes that are spaced 16 in. apart, making it suitable for mounting on almost any wall, based on common wall-frame stud spacing. The wall-mount rack comes in a flat-pack which makes it easy to transport and reduces shipping costs.Free up spaceYou can mount the open-frame rack where space is limited, such as on a server room wall, office, or above a doorway, to expand your workspace and ensure your equipment is easy to access.Keep your equipment cool and accessibleBy having an open frame the server rack provides passive cooling to equipment. Additionally, the open frame provides easy access and configurability to your equipment, allowing you to maximize productivity.The RK12WALLO is backed by a StarTech.com 5-year warranty and free lifetime technical support.The StarTech.com Advantage

Back-of-Monitor Mounting Plate | For Compatible StarTech.com Docks and HubsCreate a clutter-free workspace by mounting your docking station or hub, freeing up space on your desktop. This VESA compatible docking station mount makes it easy to attach a compatible StarTech.com dock or hub to the backside of your monitor. VESA Compatible Mounting Adapter The docking station mounting plate attaches easily to monitors with a 75x75 or 100x100 mm VESA hole pattern.Robust Construction Made in Canada, the sturdy and durable dock and hub mount is engineered from 10 gauge steel (3.3 mm thick). Versatile Use The VESA docking station and hub mount works with monitors mounted on a stand, or attached to a monitor arm. The docking station mount provides a great way to free up desk space in offices in business or commercial spaces. It's also ideal for space-constrained areas, including hot desks and shared workstations, cubicles, mobile and wall-mounted workstations, and home offices.Save Desk Space This innovative mount is designed to work exclusively with compatible StarTech.com products including: 4-Port USB-C 10Gbps Hub - USB 3.1 to 3x USB-A + 1x USB-C (HB31C3A1CS) 4-Port USB-C 10Gbps Hub - USB 3.1 to 4x USB-A - Self Powered (HB31C4AS) 3-Port USB-C Hub with GbE - USB 3.1 (10Gbps) (HB31C2A1CGS) USB-C & USB-A 5Gbps Docking Station - USB 3.1 (5Gbps) Universal Laptop Docking Station (DK30C2DPPDUE - UK/EU)Thunderbolt 3 Dual Monitor Docking Station - Thunderbolt 3 w/ USB-C compatibility - Dual Monitor 4K60Hz (TB3CDK2DPUE - UK/EU)USB-C 3.1 5Gbps Dual Monitor Docking Station - USB-C 3.1 Gen 1 - Dual Monitor 1080p (DK30CHHPDUK - UK only)USB-C & USB-A 5Gbps Docking Station - USB 3.1 (5Gbps) Universal Laptop Docking Station (DK30C2DPPD) Thunderbolt 3 Dual Monitor Docking Station - Thunderbolt 3 w/ USB-C compatibility - Dual Monitor 4K60Hz (TB3CDK2DP)Thunderbolt 3 Dual DP Monitor Docking Station - Thunderbolt 3 w/ USB-C compatibility - Dual DP Monitor 4K60Hz (TB3CDOCKDP)USB-C 3.1 5Gbps Dual Monitor Docking Station - USB-C 3.1 Gen 1 - Dual Monitor 1080p (DK30CHHPDEU - EU only)USB-C 3.1 5Gbps Dual Monitor Docking Station - USB-C 3.1 Gen 1 - Dual Monitor 1080p (DK30CHHPDAU - AU only)USB-C 3.1 5Gbps Dual Monitor Docking Station - USB-C 3.1 Gen 1 - Dual Monitor 1080p (DK30CHHPD)Fast and Easy to Install Using the docking station mounting kit, complete with mounting plate and screws, you can mount your compatible dock or hub to the back of your monitor that is recessed up to 7mm. When installed, the dock mount sits almost flush with the monitor, while still allowing easy access. SSPMSVESA is backed by a StarTech.com 5-year warranty and free lifetime technical support. The StarTech.com Advantage- Save space by mounting your StarTech.com docking station or hub to the back of your VESA compatible monitor- Attaches to the back of monitors with a VESA 75x75 or 100x100 mm hole pattern- Robust construction made of strong 10 gauge steel (3.3 mm thick)

USB Type-C™ Gen 2 | PD 3.0 | 25 cm Cable | Bus-Powered | Mac & Windows®Expand the connectivity of your USB-C laptop with this new generation USB-C Gen 2 hub offering 10Gbps supporting greater bandwidth to connected devices and faster data transfer speeds. This bus-powered 4-Port USB-C hub plugs into your laptop’s USB Type-C or Thunderbolt 3 port, adding one USB-C port and three USB-A ports, while allowing charging of your laptop. Power Delivery 3.0 for Laptop Charging The USB-C hub can support Power Delivery (3.0) pass through, when using a USB-C power adapter, to charge your laptop, with 15W reserved to power the hub itself. Convenient Portability and Easy Setup   This compact, lightweight USB-Type-C hub is a convenient and portable addition to your laptop accessories.  The USB-C cable is built-in, and hub is bus-powered, so it draws its power directly from your computer’s USB-C port, with no external power required. That means fewer cables to carry with you when you travel. The hub can draw up to 15 Watts of power from the connected host and operating multiple bus powered devices at one time with the total available power dependent on the connected host.  The extended length attached cable of 9.8” (25 cm) provides more flexibility for longer reach connection requirements and plug-and-play installation.  Connect More USB Devices With ports for both USB-C and USB-A peripherals, this hub is backwards compatible supporting both legacy and new USB devices. You can connect flash drives, video capture devices and external hard drives, with fast data transfer speeds of up to 10Gbps. This 4-port USB Type-C hub enhances your productivity, giving you the connections, you need while you work.  HB31C3A1CPD3 is backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage- 4 PORT USB-C HUB WITH Power Delivery: From a 10Gbps USB-C host port, add 3x USB-A & 1x USB-C ports w/ this USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed 10Gbps hub; USB 3.0/2.0 Compatible; USB Bus powered- 100W POWER DELIVERY PASSTHROUGH: Use a USB-C power adapter to charge laptop (up to 85W) & power the hub/downstream port operation (15W); PD 3.0 prevents USB device drop out when power is added/removed- COMPACT & PORTABLE: A light weight USB C hub with durable aluminum housing, 9.8in (25 cm) length attached USB Type-C host cable and small form factor [3.7in (95 mm) x 1.8in (45 mm) x 0.6in (1.6 cm)]

4-Drive PCIe M.2 Enclosure | Thunderbolt™ 3 | 72W EPS Power Supply & 2.3 ft (70 cm) Thunderbolt 3 Cable IncludedThis Thunderbolt™ 3 to 4x M.2 PCIe SSD enclosure enables you to turn four M-Key PCI-Express based M.2 NVMe or AHCI solid state drives (SSDs) into a high-performance external storage solution.The SSD enclosure is self-powered with an included 72W EPS power supply that powers the enclosure, the connected drives, and provides up to 15W of power to any downstream Thunderbolt 3 devices. A 2.3 ft. (70 cm) Thunderbolt 3 Certified host cable is also included, to connect the enclosure to your computer.High Performance M.2 Storage via 40Gbps Thunderbolt 3The enclosure is compatible with 80mm M.2 PCIe based (M-Key) single/double-sided SSDs. Create an external storage solution that utilizes the high-performance bandwidth available to your Thunderbolt 3 port, providing combined data transfer speeds of up to 40Gbps for up to four drives. The vented metal enclosure features thermal pads and a cooling fan to ensure your SSDs are operating at optimal temperatures.Dedicated 8Gbps Throughput for Each Individual DriveA single 8 Gbps PCIe lane is dedicated to each connected drive. This ensures consistent read/write performance across the entire enclosure, regardless of individual drive activity. The enclosure also supports software RAID with storage management systems like Storage Spaces (Microsoft), RAID Assistant (macOS), or mdraid/mdadm (Linux). The support for software RAID, combined with exceptional drive performance, makes this the ideal enclosure for creative professionals working with large files such as high-resolution graphics, video, and CAD files.Thunderbolt CertifiedThis enclosure is Thunderbolt Certified to ensure an optimal user experience and compatibility when connected to a Thunderbolt 3 host device, such as a MacBook Pro 16, 13, Air, Lenovo ThinkPad X1 Carbon / T Series, Dell XPS / Latitude / Precision or HP EliteBook. The external drive enclosure is also forward compatible with Thunderbolt 4 devices (at Thunderbolt 3 performance).Additional Ports for Workspace FlexibilityThe enclosure features a DisplayPort output port, enabling you to connect a DisplayPort monitor to your computer through the Thunderbolt 3 enclosure, with resolutions up to 4K 60Hz. The enclosure also features a downstream Thunderbolt 3 port for daisy chaining an additional TB3 device or connect an additional TB3 compatible display (up to 5K 60Hz).M2E4BTB3 is backed by a 2-year StarTech.com warranty, with free lifetime North American based multilingual technical support.Notes:• This device is not compatible with SATA based (B-Keyed or M+B Keyed) M.2 solid state drives.• This device does not support Thunderbolt 2 or Thunderbolt 1 host devices using interface adapters.• This device only supports 80mm M.2 SSDs.• Connected downstream devices share bandwidth with connected SSDs and may reduce overall data transfer performance when connected.• Apple Mac computers with M1 processors can only support one external display connected through the SSD enclosure. However, Apple Mac computers with Intel or M1 Max / Pro processors can support dual external displays connected through the SSD enclosure.The StarTech.com Advantage

This Mini-SAS adapter lets you convert two internal SFF-8643 ports on a controller card into two external SFF-8644 ports. This enables you to connect external SAS or SATA drives in devices such as a Direct Attached Storage (DAS) device to an internal backplane or SAS controller for additional storage.The adapter can connect up to eight drives in total and is compatible with 12Gbps SAS drives as well as 6Gbps SATA drives. For a hassle-free installation, you can mount the adapter into any new or legacy desktop expansion slot, including: PCI, AGP, and PCIe. To ensure compatibility with most computer cases, full-profile and low-profile mounting brackets are included.The SFF86448PLT2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Add additional chassis cooling with a 120mm ball bearing fanThis versatile 12cm PC case fan is designed to fit a broad range of computer case designs, to circulate cool air into the case, or exhaust warm air out - preventing problems due to overheating components. A quiet cooling solution, the 12cm dual ball-bearing case fan features a high efficiency blade design that's capable of moving 72.94 CFM throughout the computer case, helping to optimize system performance. This broadly compatible PC cooling solution can be powered through a simple LP4 connection to the computer power supply, and is backed by StarTech.com's 2-year warranty.The StarTech.com Advantage- A dual ball bearing design ensures reliability and longer life- Backed by a StarTech.com 2-year warranty and free lifetime technical support

StarTech.com 4POSTCASTER. Type: Castor wheels, Product color: Black, Stainless steel, Certification: TAA, CE, REACH. Height: 3.43"" (87 mm), Weight: 3.53 lbs (1.6 kg). Quantity per pack: 4 pc(s), Package width: 3.31"" (84 mm), Package depth: 3.74"" (95 mm)

Add Gigabit Ethernet network connectivity to a Laptop or Desktop through a USB 3.0 portThe USB31000S USB 3.0 to Gigabit Ethernet Adapter adds a single RJ45 Ethernet port to a USB-enabled computer system, with support for Gigabit network connections at full bandwidth, unlike USB 2.0 adapters.This compact USB 3.0 network adapter is backward compatible with older USB 2.0/1.x computer systems (speed limited by USB bus), making it the ideal portable replacement network adapter or laptop accessory. Plus, with support for features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL), the adapter offers a versatile Gigabit network solution for home and business users alike.The USB31000S USB 3.0 Gigabit adapter is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

USB Type-C Hub | USB 3.1 Gen 2 | 25 cm Host Cable | Bus-Powered | Mac & WindowsExpand the connectivity of your USB-C laptop with this new generation USB-C Gen 2 hub offering 10Gbps supporting greater bandwidth to connected devices and faster data transfer speeds. This bus-powered 4-Port USB-C hub plugs into the USB Type-C or Thunderbolt 3 port on your device, adding one USB-C port and three USB-A ports, so you can quickly connect more USB devices. Convenient Portability and Easy Setup   This compact, lightweight USB Type-C hub is a convenient and portable addition to your laptop accessories.  The USB-C cable is built-in, and hub is bus-powered, so it draws its power directly from your computer’s USB-C port, with no external power required. That means fewer cables to carry with you when you travel. The hub can draw up to 15 Watts of power from the connected host and operating multiple bus powered devices at one time with the total available power dependent on the connected host.  The extended length attached cable of 9.8” (25 cm) provides more flexibility for longer reach connection requirements and plug and play installation.  Connect Both USB-C & USB-A Peripherals With ports for both USB-C and USB-A peripherals, this hub is backwards compatible supporting both legacy and new USB devices. You can connect flash drives, video capture devices and external hard drives, with fast data transfer speeds of up to 10 Gbps. This 4-port USB Type-C hub enhances your productivity, giving you the connections you need while you work. HB31C3A1CB is backed by a StarTech.com 2-year warranty and free lifetime technical support. The StarTech.com Advantage- 4 PORT USB-C HUB: Expand the connectivity of a USB-C laptop or PC by adding 1x USB-C & 3x USB-A ports with this USB 3.1/3.2 Gen 2 SuperSpeed 10Gbps adapter hub; Supports USB 3.0/2.0 devices- MORE POWER FOR DEVICES: USB bus-powered hub w/ data transfer speeds up to 10Gbps & power up to 15W shared with all downstream devices; Supporting SSD/thumb drives, data storage, keyboards, mice, etc.- COMPACT & PORTABLE: A light weight laptop hub with durable aluminum housing, 9.8 in (25 cm) length attached USB-C host cable and small form factor [4.1 in (105 mm) x 1.8 in (45 mm) x 0.6 in (1.6 cm)]