Showing 1150–1160 of 2027 results

Make 10Gb Ethernet connections with PoE supportThis 10-foot Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections.Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amount of EMI.The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.Secured network connectionsFor easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port.Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance.The C6ASPAT10GR is backed by StarTech.com’s lifetime warranty for guaranteed reliability.The StarTech.com Advantage- HIGH PERFORMANCE CAT6a Ethernet CABLE: 100% copper for consistent & error-free 10 gigabit connection. Fluke tested complies with ANSI/TIA-568-D Category 6 requirements; ETL Certified Wiring- PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference compatible w/ multi-speed 10Base-T/NBASE-T generation- SPECS: 10 GbE

mDP to DP Cable | DP 1.4 | 8K@60Hz | VESA® Certified | Lifetime WarrantyThis 1 meter VESA Certified Mini DisplayPort to DisplayPort v1.4 cable features a mDP male connector on one end, and a DP male latching connector on the other, allowing you to connect any Mini DisplayPort-enabled laptop or workstation to an 8K TV, monitor or projector that uses a standard DisplayPort connection.Astonishing Picture QualityThis mDP to DP 1.4 cable supports high resolutions of up to 8K (7680 x 4320p) at 60Hz or 4K (3840 x 2160) at 120Hz with a maximum HBR3 bandwidth of 32.4 Gbps and ensures that digitally protected content is displayed properly, with both HDCP 2.2 and DPCP capability. The adapter cable also supports:Multi-Stream Transport (MST) for daisy chaining multiple monitors.Display Stream Compression (DSC) v1.2 transport that enables up to 3:1 compression ratio.HDR meta transport, which offers a flexible metadata packet transport to support future dynamic HDR standards.Expanded audio transport, which covers capabilities such as 32 uncompressed audio channels, 1536kHz sample rate.Forward Error Correction (FEC), which overlays the DSC 1.2 transport, addresses the transport error resiliency needed for compressed video transport to external displays.Ultimate CompatibilityThis Mini DisplayPort to DisplayPort adapter is compatible with several systems, including your PC, Mac and Microsoft Surface devices with mDP. For ultimate convenience, this Mini DisplayPort cable works with computers that are equipped with Thunderbolt 2 ports, enabling you to connect your DP compatible displays to your mDP source. In addition, this DP1.4 adapter cable supports a wide selection of mDP1.4-equipped graphics cards such as:Radeon VII, SSG, WX x100, Pro and FirePro series.Nvidia Quadro P series.Built to LastThis Mini DisplayPort to DisplayPort v1.4 adapter cable is designed with gold-plated latching DisplayPort connectors that prevent accidental disconnection, making it a great accessory for office or boardroom applications.Having 34 AWG conductors and 4.5mm outer diameter, this slim cable offers both flexibility and ease of connection.The DP14MDPMM1MB is backed by a StarTech.com lifetime warranty and free lifetime technical support.The StarTech.com Advantage- mDP to DisplayPort 1.4 CABLE: 3.3ft (1m) VESA Certified with 32.4Gbps bandwidth; 8K 60Hz (7680x4320) w/ DSC, 4K 120Hz (3840x2160), HDR meta transport, HBR3, 32 ch audio, MST monitor daisy-chain, FEC error control; Works with DisplayHDR certified Monitors- RELIABLE: Built with internal wire manager to ensure signal integrity; Al-Mylar foil with Braid and metal connector sub-structure provide EMI shielding; Latching connector on DP end to prevent accidental disconnection- DURABLE: PVC jacket of this slim (outer diameter: 4.5mm) video cable (34 AWG) absorbs stress of frequent bends with strain relief protecting the core of the DisplayPort cord; Gold plated connectors prevent oxidization and tarnish

Eliminate excess cable clutter with a short 3ft DisplayPort to DVI active adapterThe DP2DVIMM3BS 3ft active DisplayPort to DVI converter cable lets you connect your DisplayPort-equipped desktop or laptop directly to a nearby DVI monitor or projector, saving the expense of additional adapters while eliminating the clutter of excess cable.For guaranteed compatibility with virtually any DisplayPort output the active DisplayPort to DVI adapter supports multimode (DP++) as well as single-mode DisplayPort signals. Unlike passive adapters, this ensures the DP2DVIMM3BS can be used with graphics cards that are not capable of outputting multimode DP++ signals, such as ATI® Eyefinity cards.Plus, because the converter cable supports video resolutions up to 1920x1200 you can convert a DisplayPort video source to DVI without sacrificing video quality.The DP2DVIMM3BS is backed by a 3-year StarTech.com warranty and free lifetime technical support.Note:This adapter is not compatible for use with the Apple Cinema Display.

3ft (1m) Power Extension Cord, C14 to C13, 10A 125VThis 3-foot Computer Power Cord Extension Cable can be used as a power cable for your PC, or as an extension cable for your existing computer power cord.Expertly designed and constructed of high quality materials, the power extension cable ( C14 to C13) features one computer power (female) connector and one hooded (male) power connector.This high quality Power Cord Extension Cable is backed by our Lifetime Warranty.The StarTech.com Advantage

The 50FIBPLCLC2 2m LC to LC Plenum Fiber Cable features 50/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex multimode applications.The OFNP Plenum rating is ideal for installation in air plenums, ducts, walls, conduit, ceilings, etc. where CMP fire rating is required.Each Duplex 50/125 (OM2) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty.The StarTech.com Advantage- Ideal for installation in air plenums, ducts, walls, conduits, ceilings, etc.- Guaranteed reliability

Connect your VGA Displays to DVI-I video sourcesThe DVIVGAMFB10P 10-pack of Black DVI-I to VGA Adapters offers a cost-effective option when you have multiple DVI-enabled computers to connect to VGA monitors. At a lower cost per unit, these DVI to VGA adapters convert DVI male connectors to VGA female connectors - a perfect solution for schools, and other organizations to connect DVI-I desktop or laptop computers to VGA monitors or projectors.The adapters are constructed of high-quality materials to ensure dependability, and are backed by StarTech.com's lifetime warranty.Please Note: This product is intended for connections between DVI-I and VGA devices. If your devices use a DVI-D connector, please refer to StarTech.com's DVI2VGACON"" text=""DVI to VGA Converter (DVI2VGACON).The StarTech.com Advantage- Cost-effective solution for purchasing bulk DVI-I to VGA adapters- Guaranteed reliability

StarTech.com NLBK-5F-CAT6A-PATCH. Cable length: 59.1"" (1.5 m), Cable standard: Cat6a, Cable shielding: S/FTP (S-STP), Connector 1: RJ-45, Connector 2: RJ-45, Connector contacts plating: Gold, Data transfer rate: 10000 Mbit/s, Product color: Black

Make Fast Ethernet network connections using this high quality Cat5e Cable, with Power-over-Ethernet capabilityThe M45PAT35BL Cat5e Patch Cable (35 ft) meets or exceeds all Cat 5e specifications to ensure reliable Ethernet network connections, and features a durable blue PVC jacket that enables you to color code your network cable runs as needed.To ensure long-lasting performance, this high quality Cat5e patch cable features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance.Constructed of only top quality materials, this Cat5e Patch Cord delivers reliable performance and is backed by our Lifetime Warranty.100% Copper - a better valueStarTech.com Cat5e cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a ""cheaper"" cable, based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment.24 AWG WireThis Cat 5e cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire.50-micron Gold ConnectorsThis molded patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.The StarTech.com Advantage

Extend a power cable connection from a PDU to a peripheral deviceThe IT Pro's ChoiceStarTech.com power cables are designed for IT Pro applications and requirements, including standard and heavy-duty power cords, extension cords, medical-grade cords, splitter and passthrough cables. Performance, safety and reliability are ensured by our in-house and third-party testing labs.StarTech.com offers an extensive range of options in various lengths, connector ends, jacket types and wire gauges.• Certified for performance and safety: Made from UL listed components to meet UL62 & UL817• Environmental safety and compliance with REACH and RoHS.• 100% copper wiring tested for continuity and conductivity ensuring maximum performance and reliability.• Temperature chamber tested to ensure cable performs to environmental and jacket ratingBacked for life by StarTech.com with 24-hour, five day-a-week support from qualified Technical Advisor and our IT Pro community forums, our brand is trusted throughout the IT ecosystem and used by over 80% of Fortune 500 companies.The StarTech.com Advantage

Turn a Motherboard IDC Serial Header into a Panel-Mountable 9-Pin RS232 Serial ConnectorThe PNL9M16 16-inch IDC Serial to Panel Mount Serial Cable, features a 10-pin (IDC) motherboard header connection on one end and a panel mount DB9 male connector port on the other - a simple answer for adding a DB9 (RS232) serial port to any computer system which has an RS232 serial panel mount receptacle.This cost-effective solution bridges the compatibility gap between modern computers and legacy serial peripherals.The StarTech.com Advantage- Extend the Motherboard IDC Serial Interface to an RS232 serial panel mount receptacle- Combine legacy products with newer technology to satisfy all your business requirements- Backed by the StarTech.com lifetime warranty