Showing 70–80 of 233 results

PM871b perfectly satisfy the storage solution needs of mainstream PCs with a SATA 6.0Gbs controller and TurboWrite technology. They provide advanced SSD benefits with a broad portfolio of densities and form factors, improved performance with lower power, and data protection by TCG OPAL.

Samsung Enterprise Solid State Drives (SSDs) are being used increasingly as data storage media in computing, communication, and multimedia devices. Most SSDs use NAND Flash memory as the storage media, which is capable of retaining data without an external power supply. A typical SSD consists of two main components: the data storage device and a controller for the storage device that acts as an interface between the SSD and the host system. The SSD controller manages the interfaces from both the host side and the device side, which includes mapping bad data blocks, caching read/write data, and error checking and correction (ECC); and the controller's built-in ROM contains the firmware needed to control the drive. An SSD is an example of an embedded system, and needs a Real-Time OS (RTOS) for its operation. Several open source and proprietary firmware solutions are available for SSD controllersThe primary advantage of using Samsung SSDs is their lack of moving parts, resulting in extremely short startup and shutdown/standby times. SSDs offer superior reliability compared to traditional Hard Disk Drives (HDDs). Advances in semiconductor flash memory technologies have enabled the development of SSDs that are equal in capacities to HDDs and can be used as direct replacements. SSDs also prove to be highly cost effective in-use due to their much lower power consumption and maintenance costs. As the world leader in semiconductor memory technology, Samsung offers a comprehensive range of SSDs for deployment in a wide range of devices across every industry segment.

Samsung's 983 DCT is a high-performance solution for servers that need enhanced data reliability to safeguard critical data, from content delivery networks (CDNs) to big data, artificial intelligence (AI) and Internet of Things (IoT) applications. Available in two form factors, U.2 and M.2., the 983 DCT’s NVMe interface empowers blazing-fast speed, high responsiveness and a high Quality of Service (QoS). And with power-loss protection and end-to-end data protection, you get a highly reliable enterprise storage solution backed by a 5-year limited warranty up to 2,733 TBW.U.2 Form Factor and Non-Volatile Memory Express (NVMe)983 DCT 960GB NVMe SSDs in the M.2 form factor deliver blazing fast sequential read/write speeds up to 3,000/1,100 MB/s and random read/write speeds up to 400/38K IOPS. They also support PCI Express® (PCIe) Gen 3 x 4 lanes to provide high bandwidth and low latency.Advanced ECC Engine and End-to-End Data ProtectionDetect signal discrepancies and proactively remedy them in real time with the Error Correcting Code (ECC) engine. Secure data without performance degradation thanks to AES 256-bit encryption.Power-Loss ProtectionProtect data integrity from unexpected power loss with Samsung's advanced power-loss protection architecture. Using the electricity from a tantalum capacitor to provide enough time to transfer the cached data in the DRAM to the flash memory, you can be assured no loss of data.V-NAND TechnologySamsung's V-NAND flash memory helps to overcome the limitations of conventional planar NAND architecture. It stacks 64 cell layers vertically over one another rather than trying to fit itself onto a fixed horizontal space, in order to provide high density and performance with a small footprint.Sustained PerformanceBuilt to handle the heavier workloads of servers, the 983 DCT delivers an exceptionally high level of sustained performance over the life of the SSD to meet the demands for increased data handling.High Quality of Service (QoS)Designed for server applications, the 983 DCT offers a high Quality of Service (QoS) for a consistent, predictable latency and IOPS.S.M.A.R.T.Monitor the computer drives proactively to detect and report various reliability indicators with Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T).Dynamic Thermal Guard ProtectionSafeguard the SSD from overheating by automatically controlling the speed of the CPU relative to its core temperature, by throttling back the performance to prevent thermal shutdown.

Experience approximately four times the performance of SATA SSDsData center SSDs typically tend to run around the clock every day of the year. Furthermore, they involve multiple parallel users performing various types of mixed random read and write operations on huge datasets.Today's data centers also must serve requests from diverse applications and databases with numerous kinds of services, each requiring different performance needs.Therefore, IT managers want SSDs that are optimized to deliver outstanding mixed workload performance, which is typical of diverse data center applications that simultaneously access the same device. Engineered for outstanding performance under varying data center workloads, the Samsung PM963 NVMe SSD is optimized for mixed workloads, especially read-intensive environments.It provides instant responsiveness to the host system by applying the PCIe® 3.0 interface standard, as well as the highly efficient NVMe protocol. The PM963 also delivers superb reliability for continual operation, regardless of unanticipated power loss. Using its proven expertise and wealth of experience in cuttingedge SSD technology and memory solutions, Samsung SSDs help data centers operate continually at the highest performance levels. Samsung has the added advantage of being the sole manufacturer of all of its SSD components, ensuring end-to-end integration, quality assurance and the utmost compatibility.The Samsung PM963 NVMe SSD delivers:- High performance: Approximately four times the performance of SATA SSDs for sequential and sustained random read, using the Samsung state-of-the-art V-NAND flash memory. A new optimized Samsung NVMe controller, with a PCIe Gen3 x 4 host interface, supplies up to 32 Gb/s of bandwidth.- High density: Flash memory chips in the Samsung V-NAND architecture of the PM963 stack cells in a vertical arrangement and utilizes TLC (triple-level cell) technology to increase storage capacity, while retaining the same footprint. The PM963 is available in 960 GB, 1.92 TB and 3.84 TB disk capacities.- Exceptional value: By providing better performanceto-power efficiency, the PM963 is more affordable than SATA SSDs in terms of TCO (total cost of operation). With approximately four times the IOPS per GB, data center operators can continue to scale workload utilizations on their servers, decreasing the cost of computing.- Small M.2 form factor: Almost one quarter smaller in size when compared with the HHHL (half-height, half-length) card SSDs, the PM963 M.2 drive provides high capacities up to 1.92 TB thanks to Samsung V-NAND technology.Optimized for data center environmentsTo meet the demand for high utilization, high-duty-cycle data centers, the PM963 uses firmware that priorities QoS (quality of service) for sustained random workloads. This firmware keeps all virtual machines running quickly and smoothly. The firmware is also optimized for always-on, always-busy workloads, ready to respond quickly to incoming host requests. The Samsung SSD Toolkit, a proprietarily developed tool for Samsung NVMe SSDs, enables monitoring of the essential health status of the PM963. The toolkit identifies abnormal symptoms that occur during data center operations. Also, the PM963 leverages the same controller and NAND flash memory as high-volume laptop PCs, allowing data centers to deploy large quantities of NVMe SSDs cost effectively.TLC V-NANDflash memorySamsung V-NAND technology delivers reliable and consistent performance for today's demanding data-centric world. The technology features a unique design that stacks 48 layers on top of one another instead of trying to decrease the pitch size of the cells.This revolutionary vertical design overcomes the capacity limitations of traditional NAND technology. It also applies innovative CTF (charge trap flash) technology, which prevents data corruption caused by cell-to-cell interference.Traditional planar NAND memory requires the creation of sets of complex program algorithms to prevent data corruption caused by cell-to-cell interference. However, Samsung V-NAND is virtually immune to cell-tocell interference and does not need to go through a complex program algorithm to write data. By eliminating this step, the PM963 can write data up to two times faster than traditional planar NAND flash memory. The synergy of both structural and material innovations leads to improved speed, power efficiency and endurance. Samsung has revolutionized the storage industry by shifting the planar NAND to a vertical structure.NVMe SSDs versus SATA SSDsToday, SSDs are available with a variety of system interfaces, based on the performance requirements of the applications. Common interfaces include SATA, SAS (serial attached SCSI) and PCIe.AHCI/SATA interface limitationsThe AHCI mode set for SATA fulfills its intended architecture and design goals quite well for devices such as HDDs and optical drives. However, it performs inefficiently when applied to SSD technology.The main reason is that the storage of data in an SSD is different from that of spinning media. An SSD bears more resemblance to system memory (DRAM). In an SSD, the information stored on the device actually resides on NAND chips. Earlier NAND chips had speeds of approximately 50 MB/s per chip with usually 4 to 8 chips on a typical SSD. This accounted for speeds up to 400 MB/s (8 x 50 MB/s). Since a current SATA 3.0 has speeds up to 6 Gb/s, it allows SSDs to reach a maximum speed of up to 600 MB/s, which is sufficient for older NAND chips.However, the NAND chips currently used in SSDs usually run at around 200 MB/s. With the advent of the latest NAND chips, such as Toggle® 2.x and ONFI (open NAND flash interface) 3.x, PCIe SSDs are capable of delivering speeds up to 400 MB/s per chip, resulting in overall speeds up to 3.2 GB/s. This means that the device is capable of delivering a higher bandwidth, but the interface itself is imposing a limitation on the available bandwidth. One can easily see how a 6 Gb/s SATA has become a bottleneck in deriving the maximum possible throughput from current SSDs.NVMe is built for the SSDNVMe is a scalable host controller interface designed to address the needs of enterprise, data center and client systems that utilize PCIe-based SSDs. NVMe capitalizes on the low latency and parallelism of PCIe SSDs, mirroring the parallelism of contemporary CPUs, platforms and applications.A SATA SSD is connected to a SATA/AHCI controller, which is then connected to the PCIe root complex. But PCIe-based SSDs are connected directly to the PCIe root complex or CPU, thereby eliminating any intermediate protocols and allowing faster data flow and processing.Superb performance over SATA SSDsThe PM963 delivers a wide bandwidth of up to 2,000/1,200 MB/s sequential R/W speeds respectively, using less than 7.5 W of power. With the help of the Toggle 2.0 NAND flash interface, the PM963 delivers random performance of up to 430K IOPS for 4 KB reads and up to 40K IOPS for 4 KB writes in the sustained state.The PM963 was compared with the Samsung SATA SSD for the performance comparison. Both SSDs used the same TLC V-NAND flash memory. The PM963 provided 3.8 times more bandwidth than the SATA SSD for sequential reads up to 2,000 MB/s and 4.3 times more IOPS than the competitor for sustained random reads up to 430K IOPS.Better performance-to-power ratioThe PM963 consumes maximum power of up to 7.5 W for sequential R/W in the active state, while delivering staggering performance improvements. In comparison, the SATA SSD consumes up to 2.8 /3.7 W for sequential R/W respectively to achieve its maximum performance. However, the PM963 achieves 47/31 percent better sequential R/W performance-topower ratios respectively than the SATA SSD.Small M.2 form factorAs modern-day computers continue to get smaller, storage drives also need to get smaller, while at the same time continuing to provide the same or a higher level of performance. The PM963 comes in 2.5-inch and M.2 form factors using PCIe lanes, supported universally by almost all vendors in the market today. With just 22 mm width and 110 mm length, the PM963 M.2 SSD is almost a quarter smaller in size when compared to the HHHL card SSDs, which are popular in data center and enterprise environments.Enterprise-grade power-loss protectionDuring normal power-off periods, the host server allocates time to maintain data integrity by transmitting standby commands to each device. In the event of an unexpected power loss, though, the cached data in the internal buffers (DRAM) of the storage device can be lost. This event can occur with power outages or users unplugging devices from the system.However, the PM963 has been designed to prevent data loss with its PLP (power-loss protection) architecture. Upon detection of an external power failure, the PLP solution helps reduce the risk of data loss. Using the stored energy from tantalum capacitors, it immediately provides enough time to transfer all user data and meta-data cached in DRAM to the flash memory.Dynamic thermal throttlingAlthough an SSD is considerably fast and performs tasks within a matter of seconds, sometimes its internal temperature may rise beyond a certain threshold. A rise in temperature can happen when the SSD experiences a large number of requests continuously. The increase in temperature could damage the hardware components and, eventually, the data in the storage media.To address this issue, the PM963 is equipped with DTT (dynamic thermal throttling), which controls the operation of the device based on temperature. When the device reaches a certain threshold, the DTT mode maintains the maximum level of performance that can be achieved while keeping the temperature of the device below its throttling limit.As continuous operations increase the device's temperature, the PM963 follows a three-step performance reduction DTT methodology to protect itself from overheating. The DTT is activated when the NAND temperature exceeds the threshold and reduces the performance of the device by one level, enabling the device to cool down.It measures the temperature level again and if it is greater than or equal to the previous reading, it goes one step further and reduces the performance one more level. This step-bystep method is repeated until the temperature of the device comes to a low steady state. This three-step process helps ensure minimal performance drops, as well as data and device protection.Hot swapHot swap involves replacing an SSD, HDD, CD-ROM drive, power supply or other device while the computer system is running, requiring no shutdown and rebooting. A device is replaced when it fails or when the data needs to be replaced with other data. Hot plug is a term similar to hot swap, which means that the operating system normally recognizes the device even when the device is removed (hot removal) or inserted (hot add) while the system is running.For the PM963, the 2.5-inch form factor SSD supports the hot plug and hot swap functions. And multiple tantalum capacitors ensure stable data integrity—even when the system is in a SPOR (sudden power off recovery) state.Remote health monitoringThe PM963 provides a remote health-monitoring feature through the Samsung SSD Toolkit. The Samsung SSD Toolkit is proprietary software designed to help users with easy-to-use SSD management and diagnostic features for server and data center use.The CLI (command line interface) tool currently supports Samsung data center and enterprise NVMe SSDs, and supports Linux. The Samsung SSD Toolkit is available on the Samsung SSD web site.3 The following table highlights the healthmonitoring information, which can be customized.Remote health monitoring supports:- Health monitoring: Provides vital drive status information and helps users update firmware, measure drive performance, initialize drives, calculate drive lifetime and more.- Remote health monitoring for FA: Provides a smart way to resolve field issues using the remote health-monitoring feature. Handling issues this way reduces turnaround time compared to the traditional way of handling issues, such as dispatching an engineer, and provides quicker resolutions. The customer can receive the initial resolution in two steps: first by running the SSD Toolkit and second by sending the debug information back to Samsung and effectively getting the resolution.

PM983 offers tremendous performance for Read-Intensive data centers by applying PCIe Gen 3, achieving 540K IOPS in Random Read and 3000 MB/s in sequential read speed. Using impressively low power in small form factors (2.5”, M.2), PM983 delivers an efficient SSD solution for mixed data workloads.

Samsung 860 EVO. SSD capacity: 250 GB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 520 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC/Laptop

Storage made newThe Samsung Portable SSD T5 elevates data transfer speeds to the next level and unleashes a new experience in external storage. With a compact and durable design and password protection, the T5 is truly easy to carry and stores data securely.Fast transfer speedsWith Samsung V-NAND flash memory and a USB 3.1 Gen 2 interface, the T5 provides transfer speeds of up to 540 MB/s*, that’s up to 4.9x faster than external HDDs. Transfers and backups of large-sized data including 4K videos and high-resolution photos will be much quicker and faster.Metal minimalismThe top to bottom metal design and rounded unibody fits comfortably in the palm of your hand. The T5 comes in two distinct aluminum finishes - an alluring blue for 250 GB and 500 GB models, and a deep black for 1 TB and 2 TB models.Compact and lightSmaller than the average business card, weighing just 1.80oz, and only 0.41" thick. The compact, light and slim T5 is the perfect portable storage.

Samsung Enterprise Solid State Drives (SSDs) are being used increasingly as data storage media in computing, communication, and multimedia devices. Most SSDs use NAND Flash memory as the storage media, which is capable of retaining data without an external power supply. A typical SSD consists of two main components: the data storage device and a controller for the storage device that acts as an interface between the SSD and the host system. The SSD controller manages the interfaces from both the host side and the device side, which includes mapping bad data blocks, caching read/write data, and error checking and correction (ECC); and the controller's built-in ROM contains the firmware needed to control the drive. An SSD is an example of an embedded system, and needs a Real-Time OS (RTOS) for its operation. Several open source and proprietary firmware solutions are available for SSD controllers The primary advantage of using Samsung SSDs is their lack of moving parts, resulting in extremely short startup and shutdown/standby times. SSDs offer superior reliability compared to traditional Hard Disk Drives (HDDs). Advances in semiconductor flash memory technologies have enabled the development of SSDs that are equal in capacities to HDDs and can be used as direct replacements. SSDs also prove to be highly cost effective in-use due to their much lower power consumption and maintenance costs. As the world leader in semiconductor memory technology, Samsung offers a comprehensive range of SSDs for deployment in a wide range of devices across every industry segment.

Discover the next advancement in SSD technology with our high-performance, highly reliable 960 EVO Series NVMe M.2 SSDs. Non-Volatile Memory Express (NVMe) with a new Polaris controller outperforms our SATA SSDs with exceptionally fast read/write speeds, and Samsung TurboWrite technology accelerates write speeds even further. Samsung's Magician software solution provides advanced functionality to manage, monitor and optimize drive performance. Raise your performance expectations Enhanced bandwidth beyond the SATA interface provided by the NVMe interface, combined with the new Polaris controller facilitates sequential Read/Write speeds up to 3,200 MB/s and 1,800 MB/s respectively. Plus, the new Intelligent TurboWrite technology accelerates write speeds even further. Rest easy with solid reliability The 960 EVO holds its own by boasting up to 200 TBW* for the 500GB capacity model and is backed by a 3-year limited warranty. Dynamic Thermal Guard prevents overheating, protecting your data and ensuring optimal performance. *TBW : Terabytes Written Manage your drive like magic The 960 EVO comes with the newly upgraded Magician—an advanced software solution for users to monitor, manage and maintain the drive. Magician provides personalized firmware checking and additional functions tailored for individual user's drives. It even updates the firmware automatically to make sure that the drive's performance stays up to date.

A leading-edge SSD for mixed workloadsThe SATA 2.5-inch PM863a Solid State Drive (SSD) delivers robust performance and lower latency, along with a high level of QoS (Quality of Service) and enhanced reliability under mixed workloads. The PM863a is ideal for CDNs (content delivery networks), streaming or web server applications and cloud services.V-NAND technologySamsung V-NAND technology enables the PM863a to provide a wide capacity up to 3.84 TB on the same footprint, as well as deliver better performance, endurance and power efficiency to provide all the essentials for 24/7 data center environments.Robust performanceThe PM863a shows outstanding random read/write speeds up to 97K/24K IOPS. It also delivers a strong IOPS consistency above 99% in random read, as well as superior performance in random write.Lower TCO without sacrificing performanceThe PM863a boasts a better performance-to-power ratio than standard HDD. This high performance and better power efficiency reduce operating costs of data centers. The SATA 2.5-inch PM863a can replace HDD by using the existing infrastructure and is available in wide capacity options up to 3,840 GB, which can save server space.Increase data securityThe PM863a protects data with AES 256-bit hardware-based encryption. This encryption engine secures data without the performance degradation often experienced with software-based encryption.Enhanced reliabilityThe PM863a demonstrates a low probability of data corruption. End-to-end protection keeps data consistent along the entire data transfer path and Power Loss Protection safeguards data in the write cache in the event of power failure. The Dynamic Thermal Guard algorithm monitors the temperature of the SSD in order to prevent thermal shutdown.Technology leader in innovationSamsung is a leading solution provider that designs and integrates critical components of the Solid State Drive in house. Because Samsung has intimate knowledge of every component and is a leader in V-NAND technology innovation, it can fine-tune each element and create perfect synergy.