Showing 130–140 of 180 results

QNAP offers various Ethernet network expansion cards to assist businesses and organizations in enhancing the bandwidth of their QNAP NAS to accommodate intensive data transfer and virtualization applications. These cost-effective network expansion solutions include adding a 1 GbE expansion card through a PCI slot, 10 GbE expansion cards with SFP+ or 10GBASE-T interface, and even 40 GbE expansion cards.

QNAP 8GB DDR4 SDRAM Memory Module - 8 GB (1 x 8GB) - DDR4-2400/PC4-19200 DDR4 SDRAM - 2400 MHz - CL17 - 1.20 V - Non-ECC - Unbuffered - 288-pin - DIMM

QNAP 2GB DDR4 SDRAM Memory Module - 2 GB (1 x 2GB) - DDR4-2400/PC4-19200 DDR4 SDRAM - 2400 MHz - 260-pin - SoDIMM

TRAY-35-NK-BLK053.5"" tooless tray on 3-bay NAS

QNAP 32GB DDR4 SDRAM Memory Module - For NAS Server - 32 GB (1 x 32GB) - DDR4-2666/PC4-21300 DDR4 SDRAM - 2666 MHz - 1.20 V - ECC - Registered - 288-pin - DIMM

QNAP TRAY-35-NK-WHT01 Drive Bay Adapter for 3.5" Internal - White - 1 x HDD Supported - 1 x Total Bay - 1 x 3.5" Bay

QDA-SA 6Gbps SAS to SATA drive adapter (Designed for Enterprise ZFS NAS) The QDA-SA adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 3.5-inch SAS drive bay - providing the ability to expand storage capacity by using cost-effective SATA drives. SAS dual-port advantage for fault tolerance SAS features dual porting for redundancy, eliminating single points of failure and allowing for higher reliability and performance. By installing a SATA drive with the QDA-SA into a dual-controller Enterprise ZFS NAS, the SATA drive can share these SAS dual-port advantages to ensure a high-availability, fault tolerant enterprise storage environment. Designed for Enterprise ZFS NAS The QDA-SA is easily installed in the 3.5-inch disk tray of an Enterprise ZFS NAS (Disk tray model: SP-ES-TRAY-WOLOCK). (QES 2.0.0 (or later) is required for the NAS)

QNAP 4GB DDR3 SDRAM Memory Module - 4 GB - DDR3-1600/PC3L-12800 DDR3 SDRAM - 1600 MHz - 204-pin - SoDIMM

The QXP SATA expansion cards are designed for QNAP’s TL series JBOD storage enclosures that support SATA drives. Expand storage capacity easily by installing a QXP SATA expansion card into the PCIe slot of a QNAP NAS or Windows/ Ubuntu (Linux) PC, and then connect the TL series JBOD storage enclosures using an SFF-8088 (or SFF-8644) cable. The low-profile card form-factor allows QXP SATA expansion cards to be compatible with a wide variety of NAS, computers, and servers.Supports QNAP NAS and Windows/Ubuntu PCsEach SFF-8088 or SFF-8644 (internal) connector on the QXP SATA expansion card supports up to four SATA drives. A suitable QXP card can be installed based on the number of drives you want to connect for storage expansion. For example, a NAS or PC can have two 4-port QXP-400eS cards installed, with one card connected to a 4-bay tower TL-D400S JBOD enclosure and the other card connected to a 4-bay rackmount TL-R400S. Alternatively, both cards can be connected to a single 8-bay tower TL-D800S JBOD enclosure. A NAS or PC with a single QXP-400eS card installed can also connect to an 8-bay TL JBOD storage enclosure that has only 1-4 drives installed.Hard to find SAS Expansion Cards? Try QXP SATA Expansion Cards!When connecting Windows and Ubuntu (Linux) hosts to SAS JBOD for expanding storage capacity, enterprises often choose SATA drives because there are few SAS expansion cards on the market. QXP SATA expansion cards not only support QNAP TL SATA JBOD and QNAP SAS JBOD (EJ series, REXP series) but also third-party SAS JBOD. You can easily expand the storage capacity of a server/host by installing a QXP SATA expansion card and connecting the SAS JBOD using an SFF-8088 (or SFF-8644) cable with Windows and Ubuntu (Linux) PCs software RAID configuration.QNAP JBOD Manager for Windows/Ubuntu usersThe QNAP JBOD Manager utility allows Windows and Ubuntu (Linux) PC users to monitor the status of fans, system temperature, and drive information of TL series JBOD storage enclosures.

2GB DDR4-2400, SO-DIMM, 260 PIN, T0 VERSION