Showing 10–20 of 192 results

Locks in place without tools in Lever Lock™; compatible racks

CABLE MGMT; CABLE MANAGEMENTVERTICAL; RACK ACCESSORIES;VERTICAL

Cooling panel with thermostatic control; 100 CFM at 27 dBThe smart, quiet, elegant way to keep electronics systems cool. The two rackspace Designer Inspired Ultra Quiet Fan Panel features a unique on-board processor that controls DC fan speed in direct proportion to equipment temperature resulting in quiet, reliable installations. The perfect thermal management solution for media rooms, screening rooms, and other areas where people and electronics coexist, the Designer Inspired Ultra Quiet Fan Panel boasts the following features: Dimmable temperature and alert display provides instant system status - also available without front display On-board digital processor varies fan speed based on equipment temperature, which is monitored via external sensor Local and remote notification in the event of external sensor failure Local and remote notification of over temperature and fan fault can be sent to a control system Black brushed anodized finish New intake/exhaust two panel system helps improve cooling air flow in densely populated racksCooling panel rated 100 CFM at 27 dBIntelligent thermostatic proportional controlBlack brushed and anodized finish110V input voltageIntake unit that can be added and linked to one exhaust unit

Vent blockers are used to prevent the recirculation of hot air between top-mount fans and nearby vent openings. Vent blockers should be placed over the enclosure’s vents located on the upper front of the enclosure, upper sides, and upper rear door (depending on enclosure). This will ensure that heated enclosure air will be forced out through the top-mounted exhaust fans instead of re-circulating, keeping equipment cool.

GANGING HARDWAREFOR 10 RACKS

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-18-22. Overall dimensions shall be 23.4" W x 38-1/2" H x 22.3" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 20” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.

Fan panels accommodate all standard 4-1/2” fans. 3 rackspaces (5-1/4”) high, they are made from 16-gauge flanged aluminum. Offered in a black brushed and anodized finish.

- Low profile design maximizes amount of useable rackspace- Features a strong welded frame that allows for pre-loading equipment and transportation to the installation site- Available in 16" and 18" depths- Available in 8 to 14 space useable racking height- Comes standard with two adjustable front to rear lacing bars for cable dressing or mounting accessories- Rackrail features offset cable tie area which keeps the rack to a slim 19-1/4" width- Optional runner kits allow the rack to easily slide in or out of cabinets and credenzas

Middle Atlantic Products R4 Series Four Post Open Frame Rack 38 space. Type: Freestanding rack, Rack capacity: 38U, Maximum weight capacity: 2500 lbs (1134 kg), Rack rails, Product color: Black

The SNE Series is the most advanced security rack enclosure available. This purpose-built series was designed to meet the specific requirements of IP, analog and hybrid security systems. Four available configurations fit your system type, wiring needs, cooling requirements and rack location.