Showing 120–130 of 242 results

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 1-meter. Connectors: MTRJ to MTRJInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are typically 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 5-meter/Connectors: MTRJ to (2) LCInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

Singlemode duplex fiber optic SC/SC Ethernet cable is manufactured from 9/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.

Fast, Clear Data Transmission Through Your LANData transfer speeds up to 10 GbpsIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsLC Connectors with Push/Pull TabsPush/pull tab connectors easy to install and remove with one handSturdy dual LC connectors tested to meet stringent insertion loss standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemodeFDDI- and OFNR-rated

40/100/400 GbE Cable Supports Higher Bandwidths for High-Density Data NetworkingThe N370X-05M is a premium multimode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals over short distances. It is designed to support higher bandwidths for high-density patching between data center MDFs and IDFs in enterprise installations. This singlemode 9/125 OS2 cable is an ideal choice for 100 Gb Ethernet applications up to 100 meters (328 feet) at 1550 nm. It is also backward compatible with 10 Gb and 25 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb or 400 Gb.Switchable Connectors Allow Easy Polarity ConversionsThe switchable LC/UPC duplex ends let you easily switch the fiber polarity without tools or the need to re-terminate the connectors.Yellow Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OS2-rated cable has a yellow jacket to identify it as singlemode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

400 GbE Cable Supports High Bandwidths for High-Density Data NetworkingThe N383S-01M is a premium singlemode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals. Its high bandwidth is ideal for hyperscale, edge, enterprise and colocation data center interconnect (DCI) applications where density and speed are both very important.Compact SN Connectors Designed for the Latest OSFP/QSFP-DD TransceiversThis 400 Gb cable features duplex SN connectors on both ends. SN connectors are four times smaller than standard LC connectors and provide individual and independent duplex fiber support for OSFP/QSFP-DD transceivers. Push/pull boots encourage dense vertical stacking within a crowded patch panel or switch and make the cable easy to install or remove with just one hand. The switchable SN/UPC ends let you make quick polarity changes in the field without tools or the need to re-terminate the connectors.Yellow-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OS2-rated cable has a yellow jacket to identify it as singlemode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

400 GbE Cable Supports High Bandwidths for High-Density Data NetworkingThe N383S-05M is a premium singlemode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals. Its high bandwidth is ideal for hyperscale, edge, enterprise and colocation data center interconnect (DCI) applications where density and speed are both very important.Compact SN Connectors Designed for the Latest OSFP/QSFP-DD TransceiversThis 400 Gb cable features duplex SN connectors on both ends. SN connectors are four times smaller than standard LC connectors and provide individual and independent duplex fiber support for OSFP/QSFP-DD transceivers. Push/pull boots encourage dense vertical stacking within a crowded patch panel or switch and make the cable easy to install or remove with just one hand. The switchable SN/UPC ends let you make quick polarity changes in the field without tools or the need to re-terminate the connectors.Yellow-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OS2-rated cable has a yellow jacket to identify it as singlemode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

2 Meter ( 6ft ) LC/ST, OM3 RatedUse with VCSEL and LED laser light sources High-Speed, High-Bandwidth, Low-Cost Backward compatible with legacy LAN's Ideal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant10gb Ethernet speed to 300 meters @850nm

400 GbE Cable Supports Higher Bandwidths Needed for Next-Generation Data NetworkingAs the amount of traffic in data networks grows, so does the need for next-gen devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 400G Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.Switchable LC Connectors Allow Easy Polarity ConversionsThe switchable LC duplex connectors on both ends of the cable let you easily switch the fiber polarity without tools or the need to re-terminate the connectors. This can allow for stacked LC adapters, eliminating the need for dual zip cords and reducing overall bulk cabling in high-density situations. Just remove the clipped piece holding the connector ends together on each side, identify the send and receive ends, and switch the polarity of those ends based on your application needs.Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has an aqua jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

400 GbE Cable Supports Higher Bandwidths Needed for Next-Generation Data NetworkingAs the amount of traffic in data networks grows, so does the need for next-gen devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 400G Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 40 Gb and 100 Gb networks, so you can future-proof your current application for an eventual upgrade to 400 Gb.Switchable LC Connectors Allow Easy Polarity ConversionsThe switchable LC duplex connectors on both ends of the cable let you easily switch the fiber polarity without tools or the need to re-terminate the connectors. This can allow for stacked LC adapters, eliminating the need for dual zip cords and reducing overall bulk cabling in high-density situations. Just remove the clipped piece holding the connector ends together on each side, identify the send and receive ends, and switch the polarity of those ends based on your application needs.Aqua-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has an aqua jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.