Showing 0–10 of 257 results

The Fusion pull-out accessory can be used with any of the updated Fusion microadjustable fixed and tilt wall mounts, including portrait models, to add up to 11.54" (293 mm) extension from the wall.

Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt and ClickConnect Latching.New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security.Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall- Centerless Shift provides up to 17.5" (445 mm) of post-installation lateral shift - 8.75" (222 mm) left/right of uprights - for limitless centering- Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile- Set screws keep the mount rigid, stable and secure throughout the life of the installation- ClickConnect offers an audible click when the screen safely engages with the mount- Built-in cable stand provides easy access under the screen- A full line of accessories can be installed with the mount and the entire unit can be adjusted together- Multiple installation options for various stud distances- Exclusive nesting spacers can be stacked to achieve any depth- Quick-Store Cords use magnets to easily store and access pull cords- Improved cable management with new end caps- Integrated Security- Ships with a custom hardware kit that can be hung from mount rails if installing in stages- Easy Open box with less waste to throw away

Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirementsThe LVS1U ConnexSys Video Wall system landscape mount ships with rails for each mount.SPEED- Hang units on a single strut channel for quick row leveling- No need for horizontal spacers- Vertical measurement is simply the height of the display to the next rail- Compatible with most 1-5/8" sizes of channel strut- Reduces installation time - especially for XL and recessed configurations- Tool-free ClickConnect™ latching secures displays- PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mountMISCELLANEOUS- Security - pad lock 1/4" shank diameter- Safety tested- Universal interface- Each mount comes out of the box with adjustments set in the exact same positionRIGIDITY- Rigid frame keeps displays where you set them, even after extending for service- Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes

The Proximity® Component Storage Slide-Lock Panel facilitates easy, concealed mounting of AV equipment behind displays. To simplify service and accessibility to the equipment simply slide the storage panel out. Install on wall or attach to Fusion® mounts* left, right, or below the display. The built-in and tool-free 15” x 10” Lever Lock™ plate is easily removed and replaced from the slide-lock panel to service the equipment post-installation without touching the display. With a 15 lb. (6.8 kg) weight capacity, this storage panel will hold most small devices for AV installations. The innovative slides on the CSSLP15X10 secure the storage panel and stop it from falling out or down with a push-to-open and push-to-close mechanism. This gives designers, consultants, and installers the flexibility to decide where to best position the storage panel behind the display.The patented universal small device mounting pattern of the Lever Lock plate offers the versatility to mount devices with cable ties, hook and loop fasteners, or nuts and bolts. Use Forward accessories to speed up cable management and small device mounting.- CSSLP15x10 supports a range of small devices and components on a 9.85" x 15.86" (25 x 40 cm) mounting plate footprint.- Facilitate offsite integration and service with removable Lever Lock™ panel- Compatible with Middle Atlantic Forward® small device mounting clips and cable management- Plastic removable rivet included to secure the Lever Lock™ plate to the Slide-Lock Panel- Simple push-to-open operation to extend and retract slide-lock panel behind displays- Ultimate storage flexibility!- Mounting options in portrait or landscape- Install to the left, right or below display- Attach to wall or Fusion mounts**The CSSLP15X10 can attach to Fusion ceiling mounts (including LCM & LWM menu boards) or carts and stands.

Chiefs FUSION™ Flat Panel Ceiling Mounts are installer inspired and offer perfect TV positioning and flexible adjustments for large flat panel screens. Great for digital signage installations.- Ceiling Plate and extension column are required and must be ordered separately- Compatible with traditional 1.5" NPT and new CPA pinned ceiling plates and column systems- See ceiling plates and extension columns (Adjustable and Fixed) for 1.5" NPT compatibility- See CPA ceiling plates and CPA columns for pin connection compatibilityREPEATABILITYContinuous tilt ranges with four set locking points to eliminate guess work when adjusting multiple screens.ACCESSIBILITYSimple on/off connection for ease of installation and service.CENTRIS FINGERTIP TILTEffortlessly adjust display using Centris fingertip tilt technology.SIMPLE & SECURETool free screen engagement with optional padlock security.FLEXIBILITYMount swivels to any preferred viewing angle.

FSR1U is a perfect complement to any small flat panel digital signage or hospitality application, providing fast and flexible installation, ultra-low-profile installation depth and security for use in public spaces.- Ultra-low-profile installation depth – only 0.75" (19 mm) - Portrait or landscape mountable - Chief's exclusive Q-Latch™ Mounting System saves installation time - Latch Extender provided for easy latch access with larger displays - Supports wide range of VESA patterns for 10” to 32”+ displays

Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, Centris tilt, ControlZone leveling adjustment and ClickConnect Latching. New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security. Installer-inspired Fusion tilt mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution. Features - Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall - ControlZone Leveling for post-installation fine tuning of height and leveling - Centerless Shift provides up to 17.5" (445 mm) of post-installation lateral shift - 8.75" (222 mm) left/right of uprights - for limitless centering - Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile - Set screws keep the mount rigid, stable and secure throughout the life of the installation - ClickConnect offers an audible click when the screen safely engages with the mount - Built-in cable stand provides easy access under the screen - A full line of accessories can be installed with the mount and the entire unit can be adjusted together - Multiple installation options for various stud distances - Exclusive nesting spacers can be stacked to achieve any depth - Quick-Store Cords use magnets to easily store and access pull cords - Improved cable management with new end caps - Integrated Security - Ships with a custom hardware kit that can be hung from mount rails if installing in stages - Easy Open box with less waste to throw away

Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift and ClickConnect Latching.New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security.Installer-inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low-profile display mounting solution.- Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall- Centerless Shift provides up to 17.4" (441 mm) of post-installation lateral shift for limitless centering- Set screws keep the mount rigid, stable and secure throughout the life of the installation- ClickConnect offers an audible click when the screen safely engages with the mount- Built-in cable stand provides easy access under the screen- A full line of accessories can be installed with the mount and the entire unit can be adjusted together- Multiple installation options for various stud distances- Exclusive nesting spacers can be stacked to achieve any depth- Quick-Store Cords use magnets to easily store and access pull cords- Improved cable management with new end caps- Integrated Security- Ships with a custom hardware kit that can be hung from mount rails if installing in stages- Easy Open box with less waste to throw away

Hardware kit that ships with Medium, Large and XL Universal FUSION Mounts.

This mobile Fusion AV cart incorporates rounded edges and sleek features to give the cart a softer professional feel that fits well in corporate and classroom environments. The height can be adjusted by one person via a 1/2" hex bit on a power drill without removing the screen.With the same footprint as the XPAUB, but with the addition of magnetic covers and handles for ease of use. Perfect for XL and touch panel displays as well as dual monitor video conferencing using an accessory.Provide aesthetic covering to the rear side of the displays, components and mount using the Chief Fusion Universal Back Covers.