Showing 470–480 of 672 results

We offer high-quality plenum-rated LC to ST fiber optic patch jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

We offer high-quality plenum-rated fiber optic patch cables designed with ST to SC termination, perfect for Ethernet, multimedia, or communication applications. The ST connector features a bayonet locking system and the SC connector features a push-pull locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Black - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Black - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Black - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Blue - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.- A cost effective solution that provides higher bandwidth and support for longer distances- Perfect for use in Gigabit Ethernet applications- Headroom for tomorrow’s higher bandwidth needs- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Blue- Attenuation @1310 nm: 1.0 dB/km- Attenuation @1550 nm: 0.75 dB/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features: - A cost effective solution that provides higher bandwidth and support for longer distances - Perfect for use in Gigabit Ethernet applications - Headroom for tomorrow’s higher bandwidth needs - Color-coded connector keys available in red, blue, green and black * Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Green - Attenuation @1310 nm: 1.0 dB/km - Attenuation @1550 nm: 0.75 dB/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.

Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords from Cables To Go. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.