Showing 390–400 of 672 results

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features:- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanshipSpecifications:- Connectors: (2) LC to (2) LC- Buffer OD: 900 µm- Jacket OD: 3.0 mm- Jacket color: Red- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features:- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanshipSpecifications:- Connectors: (2) LC to (2) LC- Buffer OD: 900 µm- Jacket OD: 3.0 mm- Jacket color: Red- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit. Note: Custom lengths are available; just click here for a custom fiber quote.Features: - Fully compatible with 50/125 multimode fiber applications - Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical - Use with both LED and VCSEL laser light sources - Designed for use in 10-Gigabit ethernet applicationsSpecifications: - Connectors: (2) LC to (2) SC - Type: Laser-Optimized 50/125 Multimode Duplex - Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm - 10 Gigabit transfers up to 300m using 850nm VCSEL source - Jacket color: Aqua

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get the performance you demand at a price that makes sense with multicolored 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Black- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with multicolored 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanship- Connectors: (2) LC to (2) LC- Buffer material: PVC- Buffer OD: 900 µm- Jacket material: PVC (OFNR-rated)- Jacket OD: 3.0 mm- Jacket color: Blue- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with multicolored 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. - Fully compatible with multimode fiber applications - A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances - Perfect for use in Gigabit Ethernet applications - Color-coded connector keys available in red, blue, green and black - Lifetime warranty against defects of materials and workmanship - Connectors: (2) LC to (2) LC - Buffer material: PVC - Buffer OD: 900 µm - Jacket material: PVC (OFNR-rated) - Jacket OD: 3.0 mm - Jacket color: Blue - Attenuation @850 nm: 3.75 dB/km - Attenuation @1310 nm: 1.5 dB/km - Min. bandwidth @850 nm: 160 kHz/km - Min. bandwidth @1310 nm: 500 kHz/km - Maximum tensile load: 100 N/cm - Loaded min. bend radius: 5 cm - Unloaded min. bend radius: 3 cm - Crush resistance: 750 N/cm - Impact resistance: 1000 cycles - Flex resistance: 5000 cycles