Showing 70–80 of 94 results

An ISA single DB25 bi-directional parallel card; ideal for network print servers100 percent compatible with all parallel printers, tape backups, and operating systems (including MS-DOS, PC-DOS, DR-DOS, CCI-DOS, Windows® 1.x, 2.x, 3.x, WFW, 95, NT 3.x, 4.x, Mac® OS/2 1.x, 2.x, Warp 3.x, 4.x, SCO Unix®, Linux, etc). Fully 8-bit bi-directional and with a single 25-pin female parallel port, this card is configurable as LPT 1 through LPT 3 using IRQ 5/7/none. It supports industry standard addresses, and is ideal for use with network print servers.

When you're on the job and don't have the right gender for your cable, what do you do? You can use a gender changer if you have one handy, or you can solder your own connector onto your existing cable. Available in DB9 and DB25 configurations, as well as Male or Female connectors, they are the perfect solution for modular situations.

This card connects two high speed serial peripherals (modems, digital cameras, Palm® PCs, UPSs, TAPI telephones) to one card. It incorporates two high speed 16550 UART 9-pin serial ports capable of handling data throughput rates up to 115.2 kbps. Each serial port is independently configurable as Com 1 through Com 6, and selectable for any of IRQ 2/3/4/5/7/10/11/12/15. The Lava DSerial-550 makes sure that your external modem, Palm PC, digital camera or POS devices perform to their full capacity. Compatible with all 14.4, 19.2, & 28.8 baud and faster external modems.

Commercial/institutional functionality plus attractive, durable design. Installers say low VGA connector makes easier installation. Add the finishing touch to audio/video installations with a decorative feed-through wall plate. This wall plate is stamped from sturdy 20 gauge stainless steel, and is designed to mount in standard electrical boxes or mud rings. The thick stainless steel composition provides better protection than plastic wall plates in commercial environments where constant wear and tear causes damage. Feed-through connectors and identification markings make this wall plate simple to install and easy to connect equipment. Furthermore, it is compatible with any existing wiring network. The single gang design offers connectors for HD15, 3.5mm stereo audio, composite video, and left/right audio, all in one wall plate. Feed-through connectors are designed to offer lossless signal transfer and maximum insertions for a lifetime of service. The low placement of the HD15 connector in this configuration enhances cable-routing flexibility during installation. Mounting hardware included.

Commercial/institutional functionality plus attractive, durable design. Top VGA connector most commonly used. Add the finishing touch to audio/video installations with a decorative feed-through wall plate. This wall plate is stamped from sturdy 20 gauge stainless steel, and is designed to mount in standard electrical boxes or mud rings. The thick stainless steel composition provides better protection than plastic wall plates in commercial environments where constant wear and tear causes damage. Feed-through connectors and identification markings make this wall plate simple to install and easy to connect equipment. Furthermore, it is compatible with any existing wiring network. The single gang design offers connectors for HD15, 3.5mm stereo audio, composite video, and left/right audio, all in one wall plate. Feed-through connectors are designed to offer lossless signal transfer and maximum insertions for a lifetime of service. Mounting hardware included.

PCI quad DB9 16550 UART serial board; Perfect for POS applicationsThe Lava Quattro-PCI offers four 16550 UART serial ports on a single PCI card. Ideal for point-of-sale (POS) system applications, the Lava Quattro-PCI adds four additional COM ports to any PCI equipped PC. Each of the four ports is capable of a maximum data throughput rate up to 115.2k. Because of its PCI architecture the Quattro-PCI allows IRQ sharing and automatically selects the next available IRQ and COM addresses.The Lava Quattro-PCI makes it possible to connect a bar-code scanner, credit card reader, cash drawer, and receipt printer to a single card using a single IRQ.

One component of a complete solution that, when paired with a transmitter (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, interactive whiteboard, camera, printer, hub or other USB device exactly where you want it! Our USB superbooster wall plate is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB. The overall plug-and-play solution consists of this wall plate receiver, and your choice of a compatible transmitter that is sold separately: the Decora®-compatible wall plate (#29344), the dongle (#29348) or the keystone insert (#29349). Customize the configuration to your specific needs! This versatility is ideal for applications where you need flexibility at your computer/source side. The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don't want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compatible with Leviton Decora® brand cover plates, this single gang wall plate fits a standard J-box. Compliant with USB specification 1.1.

Commercial/institutional functionality plus attractive, durable design Add the finishing touch to your installation with a decorative feed-through wall plate. Designed to mount in standard electrical boxes or mud rings, this wall plate is constructed from 3mm aircraft-grade brushed aluminum to withstand demanding commercial environments. The feed-through connectors and engraved identification markings makes this wall plate simple to install and easy to use. The VGA connector is located on the bottom to enable easier installation when using electrical boxes. Compatible with new or existing wiring networks, this single gang design offers an HD15 jack, 3.5mm stereo audio jack, composite video jack, left/right stereo audio jacks, and a keystone bezel, all in one wall plate. Universal and compatible with any wiring. The feed-through connectors are designed to offer low-loss signal transfer and maximum insertions for a lifetime of service. Keystone bezel provides added flexibility for data and networking support. Mounting hardware included. - Passive, pass through design - Durable, aircraft grade aluminum construction - Designed to fit standard single gang wall boxes

The 16-Port Rack Mount for HDMI over IP Extenders is designed as a head-end cable management solution, allowing any combination of up to 16 C2G HDMI over IP devices to be installed in a standard 19” telecom relay rack.The HDMI over IP devices may be installed in either front or rear facing orientation depending on the application. Blank filler plates can be ordered separately in quantities of four (C2G84456). Mounting brackets and hardware for mounting 16 HDMI over IP devices to the rack are included, but replacements or additional brackets can be ordered separately (C2G84457) for mounting two HDMI over IP devices to the rack.

2-pack 3ft Wiremold Plugmold Multioutlet System with USB-Black Provides standard AC power outlets across a 3ft length with two, powered USB ports for USB device charging Plugmold Multioutlet Systems are available in a tamper-resistant version with USB charging that is a great solution for adding the convenience of multiple outlets and USB charging to work or living spaces without the work required to install multiple outlets. The tamper-resistant features provide safety for multi-user facilities, residential living spaces and kitchens. - USB charging. 2.4A USB type A receptacle charges faster than other USB receptacles and is compatible with USB 2.0 and 3.0 type devices - Meets 2011 National Electrical Code® Tamper-Resistant requirements - Compact design eliminates the need for bulky AC adapters