Showing 2220–2230 of 3933 results

Velocity™ 3.5mm Mono Cables from Impact Acoustics are specifically designed to provide quality signal transfer for mono audio and data transfer applications. The 3.5mm cable lets you connect components utilizing a 3.5mm serial data jack such as whole house automation systems or any mono audio device such as a phone system. These cables feature a 27-gauge Oxygen Free Copper conductor, a drain wire, and an Aluminum Foil Shield to reject noise, and Gold plated connectors to ensure a quality connection. - Connectors: 3.5mm Mono Male to 3.5mm Mono Male - Fully molded connectors provide strain relief - Foil shielded to prevent unwanted EMI/RFI interference - Gold-Plated connectors

Use for DB9 or HD15 (VGA) connectors.

Color coordinate your fiber optic patching systems for easy identificationOur multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.We offer high-quality LC to LC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, Infiniband, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality.

Attach the audio/video from your DVD, camcorder, computer or hi-fi VCR to your AV receiverValue Series RCA Audio/Video Cables are the right choice for connecting your VCR, DVD, TV and other audio/video equipment to your TV or receiver. These low-cost cables are of high quality giving you crisp, clear sound and video for less. The coax conductor's copper braid shield helps reduce unwanted noise and distortion. The connectors are color-coded for easy installation and identification and provide excellent strain relief.

Value Series Audio Y Cables are the ideal solution for adapting your audio connections to meet your application needs. These cost effective cables are of great quality giving you crisp, clear sound for less. The dual conductor is shielded, which provides protection against EMI and RFI interference. The connectors are fully molded to provide excellent strain relief. Audio Y Adapter Cables allow you to split a signal or adapt from one connection to another.

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features:- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanshipSpecifications:- Connectors: (2) LC to (2) LC- Buffer OD: 900 µm- Jacket OD: 3.0 mm- Jacket color: Red- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit.These multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field.Features:- Fully compatible with multimode fiber applications- A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances- Perfect for use in Gigabit Ethernet applications- CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit- Color-coded connector keys available in red, blue, green and black- Lifetime warranty against defects of materials and workmanshipSpecifications:- Connectors: (2) LC to (2) LC- Buffer OD: 900 µm- Jacket OD: 3.0 mm- Jacket color: Red- Attenuation @850 nm: 3.75 dB/km- Attenuation @1310 nm: 1.5 dB/km- Min. bandwidth @850 nm: 160 kHz/km- Min. bandwidth @1310 nm: 500 kHz/km- Maximum tensile load: 100 N/cm- Loaded min. bend radius: 5 cm- Unloaded min. bend radius: 3 cm- Crush resistance: 750 N/cm- Impact resistance: 1000 cycles- Flex resistance: 5000 cycles

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit.

Get blazing-fast 10-Gigabit performance with Laser-Optimized 50/125 Low-Smoke Zero-Halogen (LSZH) Multimode Fiber Patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit. Note: Custom lengths are available; just click here for a custom fiber quote.Features: - Fully compatible with 50/125 multimode fiber applications - Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical - Use with both LED and VCSEL laser light sources - Designed for use in 10-Gigabit ethernet applicationsSpecifications: - Connectors: (2) LC to (2) SC - Type: Laser-Optimized 50/125 Multimode Duplex - Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm - 10 Gigabit transfers up to 300m using 850nm VCSEL source - Jacket color: Aqua