Showing 1010–1020 of 3933 results

Experience the next generation of networking with Cat6a patch cable from C2G. These network cables enable 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

This Snagless Discontinuous Shielded Cat6a patch cable is ideal for use with HD A/V applications from HDBaseT extenders and Power over Ethernet (PoE) applications requiring higher levels of current. The HD A/V application is perfect for conference rooms and digital signage where greater distance requirements are needed between a source and a display. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.HDBaseT certifiedThese cables have been tested and validated to guarantee they consistently meet the highest industry performance and safety standards.Design featuresThe uniquely designed Isolation Wrap contains discontinuous sections of metallized material, held in place by a polymeric layer. These cables have a nominal 0.265"" diameter that allows for higher cable density and smaller bend radius than other Cat6a cable products. These cables are also designed for Power over Ethernet (PoE) applications type 1-4 according to IEEE 802.3bt draft D1.2.Discontinuous shieldThese cables have discontinuous metallic shielding elements surrounding the inner 4-pair core of the cable. The effect of this approach is to attenuate both electromagnetic signals that emanate from the cable core and the potentially interfering electromagnetic signals that are generated by other sources. The metallic shielding elements are designed to be discontinuous to avoid any need for grounding, which is a requirement for shielded cable designs, and have been shown to provide superior Alien Crosstalk performance in comparison to conventionally designed Category 6A UTP cables.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.Connector 1: (1) RJ-45 MaleConnector 2: (1) RJ-45 Male

3.5mm Stereo Audio Cables are specifically designed for quality computer audio applications. The 3.5mm cable connects a PC sound card, portable CD player or any mini-stereo audio device with 3.5mm jacks to multimedia speakers. The cable features two copper conductors and a drain wire. The conductors and drain wire are wrapped with a braided shield to resist noise and interference.- Connectors: 3.5mm Stereo Male to 3.5mm Stereo Male- Fully molded connectors provide strain relief- Braided shield prevents unwanted EMI/RFI interference- Nickel-plated connectors- Uses: Connects PC sound cards, portable CD players or any mini-stereo audio devices with 3.5mm jacks to multimedia speakers

Product Features- Connect the USB-B port of a hard drive, hub or other device a USB Type-C port- Designed to support USB 3.0 (USB 3.1 Gen 1) communication and features- Backwards compatible with USB 3.0 devices- Color coded blue and labeled to designate USB 3.0 (USB 3.1 Gen 1) feature supportProduct DescriptionThis USB 3.0 (USB 3.1 Gen 1) USB-C to USB-B cable is the perfect solution for connecting a hard drive, hub, or other device that has a USB B port to a computer, tablet or other device that has a USB Type-C port for USB 3.0 (USB 3.1 Gen 1) communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 3.0 (USB 3.1 Gen 1) cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 5Gbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging.

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free ""clip"" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Perfect for Gigabit, Fast Ethernet, and Ethernet applications

The USB-C® Male to USB-C Male Cable (20V 5A) - USB 2.0 (480Mbps) cable is the perfect solution for connecting two standard USB-C enabled devices or accessories for charging and data transfer.Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go with the 5A charging output, while simultaneously transferring photos, music, or data at speeds up to 480 Mbps.The USB-C connector has a symmetrical design which is identical on both sides, so no more worrying about whether it's upside-down or right-side-up. It will plug in the first time, every time—while preventing damage to the connector port.

Velocity™ 3.5mm Stereo to RCA Stereo Audio Cables from Impact Acoustics are specifically designed to provide quality music transfer from quality audio applications. With this cable you can connect a PC sound card, portable CD player, MP3 player, iPod®, or any mini-stereo audio device with 3.5mm jacks to other audio devices with RCA audio jacks. These cables feature two 27-gauge Oxygen Free Copper conductors, a drain wire, an Aluminum Foil Shield to reject noise, and Gold plated connectors to ensure a quality connection. - Connectors: 3.5mm Stereo Male to 2x RCA Stereo Male - Fully molded connectors provide strain relief - Foil shielded to prevent unwanted EMI/RFI interference - Gold-Plated connectors

Out of power connectors? Our Y Power Splitters are the answer. Easily attach additional hard drives, cd-roms, cd-rws, etc.to your computer's power supply. These cables meet or exceed industry standards. Don't trust just any cable to power your devices. Please call if you need a custom length. - Connector: One 4-pin Male Socket to Two 4-pin Jacket Females. - Splits one 5-1/4 power connector into two 5-1/4 power connectors. - Designed for Hard Drives, CD-ROMs, CD-RWs, Tape Drives, Fans, etc.

The C2G Performance Series Ultra Flexible High Speed HDMI Cable is perfect for connecting a wide variety of devices from computers to projectors and monitors, AV presentation furniture, or in-wall applications requiring high speed HDMI features and video resolutions up to 4k (4096 x 2160) at 60Hz — perfect for conference rooms, classrooms, churches, and other commercial installations.This Ultra Flexible High Speed HDMI Cable was designed for installations in tight spaces and offers commercial grade connectors that feature compact overmolding for high density environments, integrated finger grips on the top, bottom, and sides, for easy insertion and removal, and the gripping connector shell has 2x greater port retention to keep your devices connected. The gold plated connectors on the cable allow for better shielding, increased electrical conductivity, and durability.This Ultra Flexible High Speed HDMI Cable supports the updated library of Consumer Electronic Control (CEC) commands, allowing communication between devices connected through the HDMI ports. Lastly, this fully-functional, high bandwidth cable has been tested to perform at industry standards and is backed by a lifetime warranty.